How to Remove a Blower Motor Resistor on 2009 Dodge Nitro?

To access the resistor of the blower motor, the negative battery cable should be disconnected to avoid powering on the air bag system and wait two minutes. Wait a time of five minutes to cool the blower motor. Reduce the glove box, disconnect the wire harness and take the two screws holding the resistor.

OEM 2009 Dodge Nitro Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2009 Dodge Nitro Resistor Part Number: 68003998AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Dodge Nitro Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885482AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro Blower Motor Resistor Parts and Q&A

Q: How to Remove a Blower Motor Resistor on 2009 Dodge Nitro?
A: To access the resistor of the blower motor, the negative battery cable should be disconnected to avoid powering on the air bag system and wait two minutes. Wait a time of five minutes to cool the blower motor. Reduce the glove box, disconnect the wire harness and take the two screws holding the resistor.