What Are A/C Compressor Cut-Out Switches and How Do They Work on 2009 Dodge Viper?

Before you replace the A/C low pressure switch, cut off the negative battery cable. Afterwards, lift and keep the vehicle raised, take the right front wheel away and cut out the right inner fender splash panel. After that, loosen the wire harness from the A/C low pressure switch on top of the accumulator. Afterwards, disconnect the A/C low pressure switch from the accumulator and throw away the O-ring seal. You do not have to drain the refrigerant during the cooling process.

OEM 2009 Dodge Viper A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Compressor Cut-Out Switches found

View related parts
2009 Dodge Viper Pressure Switch Part Number: 5290274AB
Product Specifications
- Other Name: Switch - A/C Low Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; Switch A/C Low Pressure Cut Off
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290274AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper A/C Compressor Cut-Out Switches Parts and Q&A

Q: What Are A/C Compressor Cut-Out Switches and How Do They Work on 2009 Dodge Viper?
A: Before you replace the A/C low pressure switch, cut off the negative battery cable. Afterwards, lift and keep the vehicle raised, take the right front wheel away and cut out the right inner fender splash panel. After that, loosen the wire harness from the A/C low pressure switch on top of the accumulator. Afterwards, disconnect the A/C low pressure switch from the accumulator and throw away the O-ring seal. You do not have to drain the refrigerant during the cooling process.