How is the Blower Motor Installed on 2009 Dodge Viper?

With the HVAC housing upside down, place the blower motor into it and fix it in place with screws, tightening them until they read 2 Nm (17 in. lbs. torque). You should then attach the blower motor air intake duct and set the wire harness lead and connector aside. In the end, reconnect the negative battery cable.

OEM 2009 Dodge Viper Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2009 Dodge Viper Blower Motor Part Number: 5093248AB
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Motor Blower With Wheel
- Item Weight: 5.10 Pounds
- Item Dimensions: 13.0 x 12.6 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093248AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper Blower Motor Parts and Q&A

Q: How is the Blower Motor Installed on 2009 Dodge Viper?
A: With the HVAC housing upside down, place the blower motor into it and fix it in place with screws, tightening them until they read 2 Nm (17 in. lbs. torque). You should then attach the blower motor air intake duct and set the wire harness lead and connector aside. In the end, reconnect the negative battery cable.