How to Install the Drive Belt and Engine Cover on Chrysler Crossfire?

Start by threading the accessory drive belt around all of the pulleys on the engine. After that, loosen the belt tensioner by rotating it counterclockwise and slip the drive belt over the tensioner pulley. With the tensioner loose, take out the wrench. Slide retaining clips of the engine cover under the rubber mounts and push it firmly down to secure the fit. Adding a bit of lubricant to the rubber mounts will make the installation of the engine cover easier. Once you have checked the steps before, start the engine to confirm the accessory drive belt is placed properly.

How to Remove and Replace the Drive Belt on a 2.7L Engine on Chrysler 300?

Begin by removing the negative battery cable from the battery before you take off and replace the accessory drive belt on a 2.7L engine. Following this, turn the belt tensioner in the opposite direction until it touches its stop in order to remove the belt. Then, slowly move the tensioner into the freearm position to avoid letting the tensioner arm snap back which could seriously damage the tensioner. Remember that the belt tension cannot be changed, because it is kept tight by an automatic system.

OEM Chrysler Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

94 Drive Belts found

View related parts
Chrysler Serpentine Belt Part Number: 4668240
$2.04 MSRP: $2.58
You Save: $0.54 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator Drive; Alternator Belt; Belt, Alternator Drive; Belt Alternator Drive
Fits the following Chrysler Models:
- Sebring | 1995-1999 | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 5281261AA
$27.64 MSRP: $40.60
You Save: $12.96 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | AWD Launch Edition, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Voyager | 2020-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 4627534AA
$36.56 MSRP: $54.20
You Save: $17.64 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, Limited, S | 6 Cyl 3.6 L FLEX
View related parts
Chrysler Serpentine Belt Part Number: 4891875AA
$54.51 MSRP: $81.10
You Save: $26.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
Fits the following Chrysler Models:
- Pacifica | 2007-2008 | Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS
- Sebring | 2007-2010 | Limited | 6 Cyl 3.5 L GAS
- Town & Country | 2008-2010 | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View More
View related parts
Chrysler Serpentine Belt Part Number: 4891519AE
$31.56 MSRP: $47.05
You Save: $15.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Power Steering Belt; A/C Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4891519AC, 4891519AD, 4891519AB
Fits the following Chrysler Models:
- PT Cruiser | 2003-2010 | Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 53032817AB
$61.61 MSRP: $89.75
You Save: $28.14 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032817AA
Fits the following Chrysler Models:
- Aspen | 2007 | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 4668380AF
$24.18 MSRP: $35.80
You Save: $11.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator Drive; Accessory Drive Belt; Alternator Belt; Belt Alternator Drive
- Replaces: 4668380AC, 4668380AE, 4668380AD, 4668380AA
Fits the following Chrysler Models:
- PT Cruiser | 2001-2010 | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 4861733AC
$41.84 MSRP: $61.40
You Save: $19.56 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt Alternator And A/C Compressor; Belt Alternator Drive
- Replaces: 4861722AB, 4861733AA
Fits the following Chrysler Models:
- Sebring | 2005-2006 | Base | 2.4L L4, 4 Cyl 2.4 L GAS
- Town & Country | 2002-2004
- Voyager | 2001-2003 | Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View More
View related parts
Chrysler Serpentine Belt Part Number: 4612828
$28.85 MSRP: $37.14
You Save: $8.29 (23%)
ADD TO CART
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive, 3.3L-3.8L Engine; Belt Accessory Drive
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Town & Country | 1996-2000 | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2000 | Base, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Serpentine Belt Part Number: 4892479AB
$48.28 MSRP: $70.90
You Save: $22.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Drive Belt; Alternator Belt; Belt; Belt Accessory Drive
- Replaces: 4573013AB
Fits the following Chrysler Models:
- 300M | 1999-2004 | Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS
- Cirrus | 2000, 1997 | LX
- Concorde | 1998-2004 | LXi, Limited | 3.2L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1999-2001 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
- Prowler | 2001-2002 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Serpentine Belt Part Number: 4593685AA
$42.58 MSRP: $63.35
You Save: $20.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine; Belt
- Replaced by: 4593685AB
Fits the following Chrysler Models:
- 300 | 2006-2010 | Base, LX, Touring | 6 Cyl 2.7 L GAS
View related parts
Chrysler Power Steering Belt Part Number: MN195135
$4.08 MSRP: $5.17
You Save: $1.09 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Power Steering; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt Power Steering; Drive Belt
Fits the following Chrysler Models:
- Sebring | 2005 | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Belt - Serpentine Part Number: 68027636AB
$52.48 MSRP: $77.95
You Save: $25.47 (33%)
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
Fits the following Chrysler Models:
- Aspen | 2008-2009 | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 55111074AC
$24.19 MSRP: $48.85
You Save: $24.66 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
- E Class | 1984 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS
- Executive Limousine | 1985 | Base | 4 Cyl 2.6 L GAS
- Executive Sedan | 1984 | Base | 4 Cyl 2.6 L GAS
- Fifth Avenue | 1985-1989 | Base | 8 Cyl 5.2 L GAS
- Grand Voyager | 2000 | Base, SE | 3.0L V6, 3.3L V6, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Imperial | 1990-1993 | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Laser | 1984-1986 | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- LeBaron | 1985-1995 | Base, GT, GTC, GTS, High Line, LE, LX, Landau, Premium | 3.0L V6, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1984-1993 | Base, Fifth Avenue, Landau, Salon, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Chrysler Serpentine Belt Part Number: 4593814AA
$45.96 MSRP: $68.35
You Save: $22.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 5281550AC
Fits the following Chrysler Models:
- Pacifica | 2005-2008 | Base, LX | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 5097758AA
$146.07 MSRP: $220.00
You Save: $73.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 5281296AA
$24.91 MSRP: $36.60
You Save: $11.69 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Serpentine Belt Part Number: 4892748AD
$29.40 MSRP: $38.05
You Save: $8.65 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 4892748AA, 4892750AA, 4892748AC
Fits the following Chrysler Models:
- Sebring | 2001-2004 | Base, GTC, LX, LXi, Limited, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 4593668AA
$37.18 MSRP: $79.95
You Save: $42.77 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive
- Replaces: 4861850AB
Fits the following Chrysler Models:
- Pacifica | 2004-2006 | Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Serpentine Belt Part Number: 4892562AA
Product Specifications
- Other Name: Belt - Alternator And A/C Compress; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Alternator And A/C Compressor
Fits the following Chrysler Models:
- Sebring | 2005-2006 | Base, GTC, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

| Page 1 of 5 |Next >

1-20 of 94 Results

Chrysler Drive Belt

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Drive Belt for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Drive Belt ensures all engine components stay in line preventing slippage and protecting your commute against unexpected stalls. In 1925, Chrysler carved its name by combining durable metal with reasonable prices and allowing common drivers to attain new freedom with ease. This was followed by Chrysler Airflow styling that cut through wind and enhanced cabin serenity that allowed road noise to be reduced and conversation remained unchallenged. Floating Power then attached and sealed the vibration and that showed that comfort could ride on the rough roads of open highways as well as on punchiness. Later on, minivans came in with sliding doors and real space, so families stopped playing Tetris in order to fit in some equipment. The brand continued fiddling with ride quality and interior wit demonstrated that intelligent tweaks outperform glitzy gimmicks in the long term. The user-first attitude continues to guide Chrysler each time a new model comes out of the factory door. The Drive Belt loops crankshaft, alternator, and air-conditioning compressor and the crank energy dams electricity flow and summer cabins are cool even when idling as its V or multi-groove profile clings to hard and bends under pressure without losing traction. Disregard a squealing Drive Belt and lose costly component confiscations. Replacement of Drive Belt close to 100,000 miles and a new Drive Belt promises a consistent supply of power and less roadside waiting thus adding more strength to the Chrysler confidence with each key turn.

Chrysler Drive Belt Parts and Q&A

Serpentine Belt
5097758AA
Q: How to Install the Drive Belt and Engine Cover on Chrysler Crossfire?
A:
Start by threading the accessory drive belt around all of the pulleys on the engine. After that, loosen the belt tensioner by rotating it counterclockwise and slip the drive belt over the tensioner pulley. With the tensioner loose, take out the wrench. Slide retaining clips of the engine cover under the rubber mounts and push it firmly down to secure the fit. Adding a bit of lubricant to the rubber mounts will make the installation of the engine cover easier. Once you have checked the steps before, start the engine to confirm the accessory drive belt is placed properly.
Serpentine Belt
4593684AA
Q: How to Remove and Replace the Drive Belt on a 2.7L Engine on Chrysler 300?
A:
Begin by removing the negative battery cable from the battery before you take off and replace the accessory drive belt on a 2.7L engine. Following this, turn the belt tensioner in the opposite direction until it touches its stop in order to remove the belt. Then, slowly move the tensioner into the freearm position to avoid letting the tensioner arm snap back which could seriously damage the tensioner. Remember that the belt tension cannot be changed, because it is kept tight by an automatic system.