How to Service Valve Stem Seals on Chrysler Sebring?

Begin by removing the valve spring when servicing the valve stem seals. After that, take off the valve stem seal with a valve seal tool. Squarely press the valve seal or valve spring seat onto the valve stem along the valve stem, so you don't force the top of the seal against the top of the guide. Last, put the valve spring in place.

How to Replace a Valve Stem Seal on Chrysler Sebring?

Before adding the new valve stem seal in your car, detach the negative battery cable, remove the timing belt, cylinder head cover and camshafts. Turn the crankshaft until you find TDC, fit the air hose over the adapter in the spark plug hole and apply 90 - 120 psi air pressure. With Special Tool MD-998772-A and adapter 6779, you can compress the valve springs and remove the valve locks, before taking out the valve spring(s). Use a valve stem seal tool to get rid of any of the valve stem seals that have failed. Securely put the valve seal/valve spring seat assembly onto the valve guide while checking it is in place. Install Special Tool MD-998772-A with adapter 6779 in the position shown in the manual and use it to press the valve springs, just enough so you can install the locks carefully without damaging the valves. Next, unplug the air hose and attach the spark plugs, then put in the camshafts, followed by the cylinder head cover and finally the timing belt. After that, reconnect the negative battery cable.

OEM Chrysler Sebring Valve Stem Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Valve Stem Seals found

View related parts
Chrysler Sebring Valve Seals Part Number: MD307342
$1.86 MSRP: $3.00
You Save: $1.14 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Valve Guide; Valve Stem Seal; Seal, Exhaust Valve Stem; Seal Valve Guide
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Valve Seals Part Number: 2222425000
$8.74 MSRP: $13.10
You Save: $4.36 (34%)
ADD TO CART
Product Specifications
- Other Name: Seal - Valve Guide; Valve Stem Seal; Seal Valve Guide
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Valve Seals Part Number: 4648619
$6.34 MSRP: $8.03
You Save: $1.69 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Valve Guide; Seal, Valve Stem Standard-0.15Mm Outside; Valve Guide .015" Oversize; Valve Guide/Spring.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006, 1995-1999 Chrysler Sebring | Base, JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Valve Seals Part Number: 4663904
$7.78 MSRP: $15.25
You Save: $7.47 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Valve Guide; Valve Stem Seal; Seal Valve Guide
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Valve Seals Part Number: MD184303
$2.85 MSRP: $4.60
You Save: $1.75 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Valve Guide; Valve Stem Seal; Seal, Inlet Valve Stem (Rubber); Seal, Exhaust Valve; Seal, Intake Valve; Seal Valve Guide
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Valve Seals Part Number: 4892292AA
$14.47 MSRP: $19.15
You Save: $4.68 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Valve Guide; Seal Valve Guide
- Replaces: 4792319, 4663002
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS

Chrysler Sebring Valve Stem Seal

Choose OEM Valve Stem Seal that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Valve Stem Seal follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Valve Stem Seal Parts and Q&A

Valve Seals
4648619
Q: How to Service Valve Stem Seals on Chrysler Sebring?
A:
Begin by removing the valve spring when servicing the valve stem seals. After that, take off the valve stem seal with a valve seal tool. Squarely press the valve seal or valve spring seat onto the valve stem along the valve stem, so you don't force the top of the seal against the top of the guide. Last, put the valve spring in place.
Valve Seals
MD307342
Q: How to Replace a Valve Stem Seal on Chrysler Sebring?
A:
Before adding the new valve stem seal in your car, detach the negative Battery Cable, remove the Timing Belt, cylinder head cover and Camshafts. Turn the Crankshaft until you find TDC, fit the air hose over the adapter in the spark plug hole and apply 90 - 120 psi air pressure. With Special Tool MD-998772-A and adapter 6779, you can compress the valve springs and remove the valve locks, before taking out the valve spring(s). Use a valve stem seal tool to get rid of any of the valve stem seals that have failed. Securely put the valve seal/valve spring seat assembly onto the valve guide while checking it is in place. Install Special Tool MD-998772-A with adapter 6779 in the position shown in the manual and use it to press the valve springs, just enough so you can install the locks carefully without damaging the valves. Next, unplug the air hose and attach the spark plugs, then put in the camshafts, followed by the cylinder head cover and finally the timing belt. After that, reconnect the negative battery cable.