How to Service Sway Bar Bushings on the Rear Stabilizer on Chrysler Prowler?

Before you service the sway bar bushings in the rear, first lift the car and take off the 4 bolts and tapping plates from the bushing retainers which are fastened to the frame. Ease the bushing retainers out of the bushings on the sway bar and pry the bushings off the bar with the cut made in the bushing. Before you start the installation, wipe the part of the sway bar where the bushing is situated. After that, put the newly wrapped bushings around the sway bar, being sure the slit is pointing upward. Set the bushings in the right place and install the attached retainers again. After that, attach the bushing retainer bolts and tapping plates, making certain the 4 sway bar bushing bolts are tightened to 30 Nm (265 in. lbs.) and bring the car down.

How to Install Sway Bar Bushing for Rear Suspension on Chrysler PT Cruiser?

The first step is to attach every cushion onto the sway bar so that the front of the vehicle gets the cushion's slit facing out. Then, each sway bar retainer 4 by fixing the two halves with their lower ends joined together. Lay the retainer over the cushion so that the contour matches the shape of the cushion edge and with the slit in the cushion directed toward the retainer's front half. Lay the crimp tab on the front half across the rear half to fasten the bodies. After that, push the lower parts of the cushion retainers 1 into the slots at the back of the axle 2 and turn the opposite ends upwards to allow you to insert the mounting bolts 3. Slide the bolts 3 through the retainer 1 on each cushion, turning them into the threads of the rear axle 2 until they tighten to a torque of 61 Nm (45 ft. lbs.). The last step is to reduce the height of the vehicle.

OEM Chrysler Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

66 Sway Bar Bushings found

View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 68219853AA
$12.48 MSRP: $18.35
You Save: $5.87 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cushion - Stabilizer Bar; Front Suspension Bushing Kit; Sway Bar Bushing.; Bushings; Bushing Stabilizer Bar
- Position: Front
Fits the following Chrysler Models:
- 300 | 2015-2023 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 52855534AA
$29.70 MSRP: $44.30
You Save: $14.60 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 52113196AA
Fits the following Chrysler Models:
- Aspen | 2007-2009 | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 4782683AB
$13.34 MSRP: $19.80
You Save: $6.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cushion - Stabilizer Bar; Front Suspension Bushing Kit; Sway Bar Bushing.; Bushing; Bushings; Isolator; Isolator Front Suspension Cradle; Cushion Sway Eliminator; Bushing Stabilizer Bar
- Position: Front
Fits the following Chrysler Models:
- 300 | 2005-2015 | Base, C, C Luxury, C Platinum, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 4782684AB
$12.48 MSRP: $18.35
You Save: $5.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cushion - Stabilizer Bar; Front Suspension Bushing Kit; Sway Bar Bushing.; Bushing; Bushings; Isolator; Isolator Front Suspension Cradle; Cushion Sway Eliminator; Bushing Stabilizer Bar
- Position: Front
Fits the following Chrysler Models:
- 300 | 2005-2015 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 68219852AA
$11.69 MSRP: $17.35
You Save: $5.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cushion - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
Fits the following Chrysler Models:
- 300 | 2016-2023 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 4721085AJ
$18.22 MSRP: $27.05
You Save: $8.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 4721085AE
Fits the following Chrysler Models:
- Town & Country | 2009-2011 | Limited, Touring, Touring L | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Rear Part Number: 68217933AA
$21.05 MSRP: $31.20
You Save: $10.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
Fits the following Chrysler Models:
- 300 | 2023 | C, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 68080741AA
$10.15 MSRP: $14.80
You Save: $4.65 (32%)
ADD TO CART
Product Specifications
- Other Name: Cushion - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
Fits the following Chrysler Models:
- 300 | 2011-2015 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 5168245AA
$16.29 MSRP: $24.20
You Save: $7.91 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Stabilizer Bar Cushion; Bushings; Bushing Stabilizer Bar
- Position: Front
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Stabilizer Bar Bushing, Rear Part Number: 5168021AA
$12.83 MSRP: $18.95
You Save: $6.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Eliminator; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Cushion Sway Eliminator
- Position: Rear
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Stabilizer Bar Bushing, Rear Part Number: 52855391AB
$13.68 MSRP: $20.25
You Save: $6.57 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushing Stabilizer Bar
- Position: Rear
- Replaces: 52855391AA
Fits the following Chrysler Models:
- Aspen | 2007-2009 | Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Rear Part Number: 68217934AA
$8.06 MSRP: $12.10
You Save: $4.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
Fits the following Chrysler Models:
- 300 | 2015-2023 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Rear Part Number: 5272649AC
$10.83 MSRP: $14.80
You Save: $3.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Cushion - Sway Eliminator; Rear Suspension Stabilizer Bar Bushing Kit.; Bushings; Cushion Sway Eliminator
- Position: Rear
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- Sebring | 2007-2010 | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Stabilizer Bar Bushing Part Number: 68219849AA
$12.54 MSRP: $18.60
You Save: $6.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cushion - Stabilizer Bar; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
Fits the following Chrysler Models:
- 300 | 2015-2023 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 5272590AC
$18.13 MSRP: $26.80
You Save: $8.67 (33%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing; Sway Bar Bushing.; Stabilizer Bar Cushion; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 5272590AB
Fits the following Chrysler Models:
- 200 | 2011 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- Sebring | 2007-2010 | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Front Part Number: 5272506AA
$13.34 MSRP: $19.80
You Save: $6.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Sway Eliminator; Front Suspension Stabilizer Bar Bushing Kit.; Bushing; Cushion Sway Eliminator
- Position: Front
Fits the following Chrysler Models:
- PT Cruiser | 2001-2003 | Base, Dream, GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Stabilizer Link Retainer Part Number: 4582820
$4.97 MSRP: $6.30
You Save: $1.33 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Eliminator Link; Suspension Stabilizer Bar Link; Retainer; Isolator, Sway Eliminator Link; Bushing Stabilizer Bar
Fits the following Chrysler Models:
- Concorde | 1997 | LX, LXi | 6 Cyl 3.5 L GAS
View related parts
Chrysler Stabilizer Bar Bushing, Rear Part Number: 4782339AA
$6.71 MSRP: $11.85
You Save: $5.14 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushing Stabilizer Bar
- Position: Rear
Fits the following Chrysler Models:
- Sebring | 2006 | Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS
View related parts
Chrysler Stabilizer Bar Cushion, Front Part Number: 4743041AE
$13.34 MSRP: $19.80
You Save: $6.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Position: Front
- Replaces: 4743041AD, 4743041AC
Fits the following Chrysler Models:
- Town & Country | 2001-2007 | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, Ec, LX | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Stabilizer Bar Cushion, Front Part Number: 4743024AE
$11.66 MSRP: $17.05
You Save: $5.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing Kit.; Bushings
- Position: Front
- Replaces: 4743024AD
Fits the following Chrysler Models:
- Town & Country | 2001-2007 | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

| Page 1 of 4 |Next >

1-20 of 66 Results

Chrysler Sway Bar Bushing

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Sway Bar Bushing for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Sway Bar Bushing helps to conquer body roll and fix the stabilizer bar so that one can confidently corner flat. Chrysler made stout cars that could just shake off roughness of the road since 1925 then Floating Power reduced engine shake to ensure that cabins were quiet and even car mirrors stable even in washboard trails. Chrysler followed the science of airflow and designed the Airflow body both to slice drag on the highway and to hush wind, allowing the riders to talk without yelling on long distances, a move that revolutionized the industry. The initial practical minivan was then introduced by Chrysler, demonstrating that family space, sliding-door access, and smart pricing could share a ride without resorting to gimmicks, proving the fact that roomy utility did not have to kill style. Chrysler continues to add ride quality, interior room, and baking value into every purchase to ensure that when customers drive home daily, it will feel comfortable and not a task. Sway Bar Bushing fixes the anti-roll bar to the chassis to make the tires have the same weight distribution when the car zips around a bend and when the rubber ring does not slack, steering feels sharp, body lean is reduced, and the suspension components last longer. Sloppy bushings are a menace to control. The drivers can see that an exhausted Sway Bar Bushing can be made out through clunks or creeping lean and a quick change can put the posture back in place immediately. Fresh Sway Bar Bushing is heat, water, and grit resistant; therefore, it shields comfort during years of city bumps and highway sweepers. Periodic examinations of every Sway Bar Bushing enable the owner to identify wear in its initial stages and avoid the wobble that eats away confidence.

Chrysler Sway Bar Bushing Parts and Q&A

Stabilizer Link Bushing
4626368
Q: How to Service Sway Bar Bushings on the Rear Stabilizer on Chrysler Prowler?
A:
Before you service the sway bar bushings in the rear, first lift the car and take off the 4 bolts and tapping plates from the bushing retainers which are fastened to the frame. Ease the bushing retainers out of the bushings on the sway bar and pry the bushings off the bar with the cut made in the bushing. Before you start the installation, wipe the part of the sway bar where the bushing is situated. After that, put the newly wrapped bushings around the sway bar, being sure the slit is pointing upward. Set the bushings in the right place and install the attached retainers again. After that, attach the bushing retainer bolts and tapping plates, making certain the 4 sway bar bushing bolts are tightened to 30 Nm (265 in. lbs.) and bring the car down.
Stabilizer Bar Bushing, Front
5272646AA
Q: How to Install Sway Bar Bushing for Rear Suspension on Chrysler PT Cruiser?
A:
The first step is to attach every cushion onto the sway bar so that the front of the vehicle gets the cushion's slit facing out. Then, each sway bar retainer 4 by fixing the two halves with their lower ends joined together. Lay the retainer over the cushion so that the contour matches the shape of the cushion edge and with the slit in the cushion directed toward the retainer's front half. Lay the crimp tab on the front half across the rear half to fasten the bodies. After that, push the lower parts of the cushion retainers 1 into the slots at the back of the axle 2 and turn the opposite ends upwards to allow you to insert the mounting bolts 3. Slide the bolts 3 through the retainer 1 on each cushion, turning them into the threads of the rear axle 2 until they tighten to a torque of 61 Nm (45 ft. lbs.). The last step is to reduce the height of the vehicle.