How to properly install the flywheel onto the crankshaft mounting flange in 1.4L engine on Dodge Colt?

Refit the engine plate to the rear of the cylinder block, then offer the flywheel to the crankshaft mounting flange, ensuring the bolt holes align. Screw in the bolts and tighten them to the specified torque, jamming the starter ring gear if necessary to prevent the flywheel from turning.

How Does the Flywheel Impact the Removal and Installation of the Driveplate in a 2.7L V6 Engine on Dodge Challenger?

Raise the vehicle and support it securely on jackstands, then remove the transmission. Now would be a good time to check and replace the transmission front pump seal. Use paint or a center-punch to make alignment marks on the driveplate and crankshaft to ensure correct alignment during reinstallation. Remove the bolts that secure the driveplate to the crankshaft; if the crankshaft turns, jam a large screwdriver or prybar through the driveplate to keep it from turning, then remove the mounting bolts and bolt plate. Pull straight back on the driveplate to detach it from the crankshaft. Be sure to align the matching paint marks, use thread locking compound on the bolt threads, and tighten them to the specified torque in a criss-cross pattern.

OEM Dodge Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Flywheels found

View related parts
Dodge Flywheel Part Number: 5106179AB
$667.42 MSRP: $1020.00
You Save: $352.58 (35%)
ADD TO CART
Product Specifications
- Replaces: 5106179AA
Fits the following Dodge Models:
- Dart | 2012-2016 | GT, Limited, R/T, Rallye, SE, SXT, SXT Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Flywheel Part Number: 68033536AD
$612.17 MSRP: $931.00
You Save: $318.83 (35%)
ADD TO CART
Product Specifications
- Other Name: Flywheel - Engine; Flywheel Engine
- Replaces: 68033536AB, 68033536AC, 68033536AA
Fits the following Dodge Models:
- Dart | 2012-2016 | Aero, GT, Limited, R/T, Rallye, SE, SXT, SXT Sport | 1.4L L4, 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Drive Plate Part Number: 68544198AA
$86.25 MSRP: $130.00
You Save: $43.75 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flexplate - Torque Converter Drive
- Replaces: 4800696AA
Fits the following Dodge Models:
- Avenger | 2011-2014 | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- Grand Caravan | 2011-2020 | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Journey | 2011-2019 | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View More
View related parts
Dodge Flywheel Part Number: 53010352AC
$804.71 MSRP: $1890.00
You Save: $1085.29 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 53010352AB, 53010352AA
Fits the following Dodge Models:
- Caliber | 2007-2009 | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Flywheel Part Number: 5106019AA
$261.72 MSRP: $387.00
You Save: $125.28 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch
Fits the following Dodge Models:
- Caliber | 2007-2009 | R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Flywheel Part Number: 4643416AB
Fits the following Dodge Models:
- Viper | 1997-2002, 1992-1994 | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Flywheel Part Number: 53020688AB
Fits the following Dodge Models:
- Dakota | 2001-2008 | Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
- Ram 1500 | 2002-2008 | Laramie, SLT, ST, SXT, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Flywheel Part Number: 53021788AA
Fits the following Dodge Models:
- Dakota | 2009 | Big Horn, Laramie, Lone Star, ST, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Flywheel Part Number: MD379541
Product Specifications
- Other Name: Flywheel - Engine; Flywheel Engine
Fits the following Dodge Models:
- Stratus | 2001-2005 | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Flywheel Part Number: 5037226AB
Fits the following Dodge Models:
- Ram 1500 | 2004-2006 | SRT-10 | 10 Cyl 8.3 L GAS
- Viper | 2003-2006 | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Flywheel Part Number: MD184292
Fits the following Dodge Models:
- Stealth | 1991-1996 | Base, ES, R/T, R/T Turbo | 6 Cyl 3.0 L GAS
View related parts
Dodge Drive Plate Part Number: 68056958AA
Product Specifications
- Other Name: Flywheel
- Replaces: 5175957AA, 5175957AB, 68017771AA
Fits the following Dodge Models:
- Sprinter 2500 | 2007-2009 | Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
- Sprinter 3500 | 2007-2009 | Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
Dodge Flywheel Part Number: 52109072AD
$156.35 MSRP: $230.00
You Save: $73.65 (33%)
Product Specifications
- Replaces: 52109072AC
Fits the following Dodge Models:
- Hornet | 2024-2025 | R/T, R/T Plus | 4 Cyl 1.3 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Dodge Flywheel Part Number: 4593040
Product Specifications
- Other Name: Flywheel Include S Ring Gear; Flywheel, W/Ring Gear (Mexico Build Only - Vin "T")
Fits the following Dodge Models:
- Neon | 1995-1998 | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Flywheel Part Number: MD030644
Fits the following Dodge Models:
- Colt | 1984-1994 | Base, DL, E, ES, GL, GT, Premier, Vista, Vista Custom | 4 Cyl 1.4 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Dodge Flywheel Part Number: 4668504AB
Fits the following Dodge Models:
- Neon | 2002 | ACR, Base, ES, R/T, SE | 4 Cyl 2.0 L GAS
View related parts
Dodge Flywheel Part Number: 53006216AC
Fits the following Dodge Models:
- Ram 2500 | 1994-2003 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
- Ram 3500 | 1994-2003 | Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
Dodge Flywheel Part Number: 53020521
Product Specifications
- Other Name: Flywheel, W/Ring Gear
Fits the following Dodge Models:
- D150 | 1992-1993 | Base | 8 Cyl 5.2 L GAS
- D250 | 1992-1993 | Base | 8 Cyl 5.2 L GAS
- Dakota | 1994-1999 | Base, SLT, Sport, WS | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
- Ram 1500 | 1994-2001 | Base, LT, Laramie, SLT, ST, Sport | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
- Ram 2500 | 1994-1996 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
- Ramcharger | 1992-1993 | Base, Canyon Sport, Royal SE | 8 Cyl 5.2 L GAS
- W150 | 1992-1993 | Base | 8 Cyl 5.2 L GAS
- W250 | 1992-1993 | Base | 8 Cyl 5.2 L GAS
View More
View related parts
Dodge Flywheel Part Number: 53020585
Fits the following Dodge Models:
- Ram 1500 | 1994-2001 | Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
- Ram 2500 | 1994-2002 | Base | 8 Cyl 5.9 L GAS
- Ram 3500 | 1994-2002 | Base | 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Flywheel Part Number: 53021628AA
Fits the following Dodge Models:
- Dakota | 2001-2003 | Base, SLT, SXT, Sport | 6 Cyl 3.9 L GAS

| Page 1 of 3 |Next >

1-20 of 43 Results

Dodge Flywheel

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Flywheel for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Flywheel stored engine energy ensures the smooth delivery of power in cases where the revs are reduced. Dodge has been an advocate of all-steel bodies since 1914 and it has been established that muscle begins with solid metal. Dodge has constructed vicious HEMI and Viper cars that convert normal highways into drag strips. Dodge now quails electric growls into its Fratzonic Chambered Exhaust and allows silence to be optional. Dodge continues the pursuit of brash acceleration rather than applause. The badge is symbolic of pure speed, a lot of smiling, and the notion that driving should never actually be polite. Peel off the marketing bling and you are left with a firm that considers quarter-mile times and the width of grins to be the measures of utter success. Flywheel is mounted at the hub of the crankshaft and it stores the rotational energy to ensure that the engine does not stumble between combustions. Flywheel secures the clutching face with a rough friction ring which ensures that gear changing is always clean. Flywheel is also the partner of the starter gear as it spins the crank to life without making a noise on cold mornings. Its cast iron mass collaborates with the pressure plate to absorb any vibration that would have caused vibration to vibrate dashboards and temperance on either side of the road. Flywheel options vary between solid mass power and dual mass serene allowing drivers to select between punchy and quiet.

Dodge Flywheel Parts and Q&A

Drive Plate
MD760503
Q: How to properly install the flywheel onto the crankshaft mounting flange in 1.4L engine on Dodge Colt?
A:
Refit the engine plate to the rear of the cylinder block, then offer the flywheel to the crankshaft mounting flange, ensuring the bolt holes align. Screw in the bolts and tighten them to the specified torque, jamming the starter ring gear if necessary to prevent the flywheel from turning.
Drive Plate
4752574AB
Q: How Does the Flywheel Impact the Removal and Installation of the Driveplate in a 2.7L V6 Engine on Dodge Challenger?
A:
Raise the vehicle and support it securely on jackstands, then remove the transmission. Now would be a good time to check and replace the transmission front pump seal. Use paint or a center-punch to make alignment marks on the driveplate and crankshaft to ensure correct alignment during reinstallation. Remove the bolts that secure the driveplate to the crankshaft; if the crankshaft turns, jam a large screwdriver or prybar through the driveplate to keep it from turning, then remove the mounting bolts and bolt plate. Pull straight back on the driveplate to detach it from the crankshaft. Be sure to align the matching paint marks, use thread locking compound on the bolt threads, and tighten them to the specified torque in a criss-cross pattern.