How to service and repair a Brake Shoe Set on Jeep Wrangler?

To access the brake shoes for servicing and repairing, the first step is to raise the vehicle. Next, it must be secured by means of jack stands. Afterwards, remove the tire and wheel assembly. After that, remove the disc brake caliper adapter and the disc brake rotor. Remove the wheel speed sensor and center floor console. Using a suitable tool, lock out the park brake system at lever while pulling upward on the brake cable. Detach the two rear parking brake cables from the equalizer first followed by removing parking brake cable one from brake shoe lever two at axle Subsequently, the axle shaft is removed and the brake support seal plate is tapped off the axle shaft. Lastly, take off the support plate with the brake shoes from the axle shaft and take apart the rear park brake shoes.

How to service and repair a Brake Shoe Set on Jeep Cherokee?

To service and repair the brake shoes, first lift the vehicle and remove the rear wheels. Remove the spring nuts that attach the drums to the wheel studs, and then take the brake drums off. In case it is difficult to remove the drums, retract the brake shoes via the access plug located at the backside of the backing plate by unscrewing the adjuster screw with the help of a brake tool and screwdriver. After that remove the U-clip and washer that hold the adjuster cable to the parking brake lever and the primary and secondary return springs from the anchor pin with brake spring pliers. Use a standard retaining spring tool to remove the retainer springs, retainers and pins. You should install spring clamps on the wheel cylinders to hold the pistons while you remove the adjuster lever, adjuster screw and spring, and adjuster cable and cable guide. In the end, remove the brake shoes and parking brake strut, detach the cable at the parking brake lever, and take out the lever. To prepare for installation, use a brake cleaner to clean the support plate; if new drums are going to be installed, scrape off the protective film with a carburetor cleaner and rinse with a brake cleaner. Apply a light coat of Mopar multi-mileage grease on the anchor pin and lubricate it. Apply the same grease to the brake shoe contact surfaces of the support plate. Spray-lube the adjuster screw threads and pivot, then attach the parking brake lever to the secondary brake shoe with a new washer and U-clip. Detach the wheel cylinder clamps and connect the parking brake cable to the lever. The brake shoes should be fitted onto the support plate and secured in position using new hold down springs, pins and retainers. Followed by the parking brake strut and spring. The guide plate and adjuster cable are to be installed onto the anchor pin and install primary & secondary return springs. Install adjuster cable guide onto secondary shoe then grease and assemble adjuster screw and install it along with spring and lever and attach adjuster cable. The shoe must be adjusted to the drum, followed by installing the wheel/tire assemblies. Initially, verify firm brake pedal before moving the vehicle.

OEM Jeep Brake Shoe Set

Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Brake Shoe Sets found

View related parts
Jeep Parking Brake Shoes, Rear Part Number: 5191215AB
$121.95 MSRP: $187.00
You Save: $65.05 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Shoe And Lining Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5191215AA
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2007-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 68003589AA
$47.95 MSRP: $72.20
You Save: $24.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Brake Shoes Front; Shoes; Shoe And Lining Kit Parking Brake; Shoe And Lining Kit Drum; Parking Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Gladiator | 2020-2025 | 80th Anniversary, Altitude, Freedom, High Altitude, Launch Edition, Mojave, Mojave X, NightHawk, Overland, Rubicon, Rubicon X, Sport, Sport S, Texas Trail, Willys, Willys Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS
- Liberty | 2008-2012 | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
- Wrangler | 2007-2025 | 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X, X-S | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS
- Wrangler JK | 2018 | Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View More
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 4560176AA
$144.95 MSRP: $217.00
You Save: $72.05 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Grand Cherokee | 2011-2022 | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- Grand Cherokee WK | 2022 | Laredo E, Laredo X, Limited | 6 Cyl 3.6 L FLEX
View related parts
Jeep Brake Shoes, Rear Part Number: 5191306AA
$52.09 MSRP: $77.20
You Save: $25.11 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Drum; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes; Shoe And Lining Kit Drum; Drum Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2009-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 5093390AC
$61.21 MSRP: $153.00
You Save: $91.79 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Parking Brake Shoe; Shoes
- Position: Rear
- Replaces: 5093390AA, 5093390AB
Fits the following Jeep Models:
- Grand Cherokee | 1994-1998 | 5.9 Limited, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Liberty | 2003-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
- Wrangler | 2003-2006 | 65th Anniversary Edition, Rubicon, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 4 Cyl 2.4 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 5086930AC
$164.48 MSRP: $218.00
You Save: $53.52 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Parking Brake Shoe; Shoes
- Position: Rear
- Replaces: 5086930AA, 5086930AB
Fits the following Jeep Models:
- Commander | 2006-2010 | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
- Grand Cherokee | 2005-2010 | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Shoes Part Number: 5011988AB
$190.54 MSRP: $273.00
You Save: $82.46 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Shoes Part Number: V2020818
Product Specifications
- Other Name: Shoe Kit - Rear Wheel Brake (4 Packing); Shoe Package, Brake; Shoe Package
Fits the following Jeep Models:
- Cherokee | 1987-1990 | Base, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- J10 | 1984-1988 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.9 L GAS
- J20 | 1984-1988 | Base | 8 Cyl 5.9 L GAS
- Wrangler | 1987-1990 | Base, Islander, Laredo, S, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.2 L GAS
View More
View related parts
Jeep Shoes Part Number: 83502385
Product Specifications
- Other Name: Shoe Kit Drum; Drum Brake Shoe; Shoe Package, Brake; Shoe Package
Fits the following Jeep Models:
- Cherokee | 1987-1991 | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1991-1992 | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Wrangler | 1987-1990 | Base, Islander, Laredo, S, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.2 L GAS
View More
View related parts
Jeep Brake Shoes, Rear Part Number: 5019536AA
Product Specifications
- Other Name: Drum; Drum Brake Shoe, Rear; Parking Brake Shoe; Shoes; Shoe And Lining Kit Drum; Drum Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Wrangler | 2001-2006 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Brake Shoes Part Number: 4796310
Product Specifications
- Other Name: Shoe And Lining Kit Drum; Parking Brake Shoe; Drum Brake Shoe; Shoes
Fits the following Jeep Models:
- Cherokee | 1994-2001 | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Grand Cherokee | 1993-1998 | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Shoes Part Number: 4713350
Product Specifications
- Other Name: Brake Automatic Adjuster; Cable Brake Automatic Adjuster; Cable, Automatic Adjuster
Fits the following Jeep Models:
- Cherokee | 1992-1993 | Base, Briarwood, Country, Laredo, Limited, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Brake Shoes, Rear Part Number: 4723367AB
Product Specifications
- Other Name: Shoe Kit - Drum; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes; Shoe And Lining Kit Drum; Drum Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Cherokee | 1997-2001, 1991 | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1991-1992 | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Wrangler | 1997-2001, 1991-1995 | Base, Islander, Renegade, Rio Grande, S, SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View More

Jeep Brake Shoe Set

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Brake Shoe Set for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Brake Shoe Set comprises rear shoes that create friction to slow the vehicle down. Jeep's origins are in wartime grit. The first civilian Jeep rolled out in 1945. This auto never quit chasing the dirt. The brand retained the boxy stance and open-air vibe that allows the driver to feel part of the trail. Further, it added Selec-Terrain. Thus, with a twist of a dial, snow, sand, or mud can be dealt with no fuss. The modern vehicle comes with voice control, over the air updates, and camera aided assistance, features that are useful rather than flashy. The shared experience on the trail is more prized than shiny trim. With its robust axles and simple shape, Jeep demonstrates an appetite for rocky terrain. The grocery run still feels like a mini adventure, which is why this badge is a decade-old favorite. Within a Jeep, the Brake Shoe Set is composed of two shoes, which are pushed from the inside out against the drum by a wheel cylinder, with the brake pedal lifting them when pressure is released. Every Brake Shoe Set is self-adjusting as the lining wears thin, keeping pedal travel consistent and parking brake hold steady. Layouts that are not servo employ a shoe that is leading and a shoe that is trailing. On the other hand, duo servo designs allow both shoes to work in conjunction, resulting in a stronger bite. A new Brake Shoe Set should be fitted when cracks, fluid soak, or heat glaze are observed to ensure short stopping distances on a heavily loaded Jeep descending a mountain grade.

Jeep Brake Shoe Set Parts and Q&A

Parking Brake Shoes, Rear
68003589AA
Q: How to service and repair a Brake Shoe Set on Jeep Wrangler?
A:
To access the brake shoes for servicing and repairing, the first step is to raise the vehicle. Next, it must be secured by means of jack stands. Afterwards, remove the tire and wheel assembly. After that, remove the disc brake caliper adapter and the disc brake rotor. Remove the wheel speed sensor and center floor console. Using a suitable tool, lock out the park brake system at lever while pulling upward on the brake cable. Detach the two rear parking brake cables from the equalizer first followed by removing parking brake cable one from brake shoe lever two at axle Subsequently, the axle shaft is removed and the brake support seal plate is tapped off the axle shaft. Lastly, take off the support plate with the brake shoes from the axle shaft and take apart the rear park brake shoes.
Brake Shoes
4796310
Q: How to service and repair a Brake Shoe Set on Jeep Cherokee?
A:
To service and repair the brake shoes, first lift the vehicle and remove the rear wheels. Remove the spring nuts that attach the drums to the wheel studs, and then take the brake drums off. In case it is difficult to remove the drums, retract the brake shoes via the access plug located at the backside of the backing plate by unscrewing the adjuster screw with the help of a brake tool and screwdriver. After that remove the U-clip and washer that hold the adjuster cable to the parking brake lever and the primary and secondary return springs from the anchor pin with brake spring pliers. Use a standard retaining spring tool to remove the retainer springs, retainers and pins. You should install spring clamps on the wheel cylinders to hold the pistons while you remove the adjuster lever, adjuster screw and spring, and adjuster cable and cable guide. In the end, remove the brake shoes and parking brake strut, detach the cable at the parking brake lever, and take out the lever. To prepare for installation, use a brake cleaner to clean the support plate; if new drums are going to be installed, scrape off the protective film with a carburetor cleaner and rinse with a brake cleaner. Apply a light coat of Mopar multi-mileage grease on the anchor pin and lubricate it. Apply the same grease to the brake shoe contact surfaces of the support plate. Spray-lube the adjuster screw threads and pivot, then attach the parking brake lever to the secondary brake shoe with a new washer and U-clip. Detach the wheel cylinder clamps and connect the parking brake cable to the lever. The brake shoes should be fitted onto the support plate and secured in position using new hold down springs, pins and retainers. Followed by the parking brake strut and spring. The guide plate and adjuster cable are to be installed onto the anchor pin and install primary & secondary return springs. Install adjuster cable guide onto secondary shoe then grease and assemble adjuster screw and install it along with spring and lever and attach adjuster cable. The shoe must be adjusted to the drum, followed by installing the wheel/tire assemblies. Initially, verify firm brake pedal before moving the vehicle.