JeepParts
My Garage
My Account
Cart
OEM Jeep Wiper Pulse Module
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Wiper Pulse Modules found
Jeep Module Part Number: 5026087AE
$168.82 MSRP: $254.00You Save: $85.18 (34%)Product Specifications- Other Name: Module - Rain Sensor; Wiper Pulse Module
- Replaces: 5026087AD, 5026087AB, 5026087AC
Jeep Intermittent Wiper Module Part Number: 56007192AB
Product Specifications- Other Name: Module - Intermittent Wiper; Wiper Pulse Module
- Replaces: 56007192
Jeep Intermittent Wiper Module Part Number: 56006957AB
Product Specifications- Other Name: Module - Intermittent Wiper; Wiper Pulse Module
Jeep Wiper Pulse Module
OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Wiper Pulse Module for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.
Jeep Wiper Pulse Module Parts and Q&A
- Q: What is a Wiper Pulse Module and How to Service It on Jeep Commander?A:Service must start by turning off the negative cable on the battery when servicing the wiper control module. Lift out the two front wiper arms from the wiper pivots and remove the cowl plenum cover/grille panel that shields the front wiper module. Following this, take out the nut anchoring the inboard end of the bracket to the cowl plenum stud and then move on to loosen and remove the two normal screws securing the module bracket to the cowl plenum. Untie the wire harness from the front wiper connector and then remove the front wiper unit together from the cowl plenum. Slide the front wiper module into the cowl plenum as one piece and join the wire harness back to the front wiper motor connector. At the bracket end nearest the door, fit the mount over the stud in the cowl plenum, insert the nut and two screws loosely into the wiper module and tighten everything securely. In the same direction, tighten the two screws and the nut so they measure 6 N.m (55 in. lbs.) by means of a torque wrench. Install the cowl plenum cover/grille panel over the front wiper module, add back both front wiper arms to their pivots and lastly reattach the battery negative cable to finish up.
Related Jeep Parts
Jeep TPMS Sensor
Jeep Ignition Coil
Jeep Ignition Switch
Jeep MAP Sensor
Jeep Mass Air Flow Sensor
Jeep Distributor Cap
Jeep Fuel Pump Relay
Jeep Air Bag Control Module
Jeep Antenna Cable
Jeep Automatic Transmission Shift Position Sensor Switch
Jeep Distributor Rotor
Jeep Washer Pump