What Are A/C Compressor Cut-Out Switches and How Do They Function on 2002 Jeep Wrangler?

Before you start handling the high pressure sensor/switch, disconnect and disconnect the negative battery lead. Disconnect the wire harness connector from the high pressure switch which is installed on the main discharge line desiding the compressor. Unscrew the high pressure switch from its position on the discharge line fitting and remove the O-ring seal as you discard it. When fitting the discharge line with a new O-ring seal, grease it with tartget specific refrigerant oil and be sure to only use O-rings manufactured from the materials advised by the R-134a system for your car. After that, put the end of the high pressure switch into the discharge line fitting, push the wire harness connector into the switch and reconnect the battery negative cable last.

OEM 2002 Jeep Wrangler A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

View related parts
2002 Jeep Wrangler Pressure Switch Part Number: 4897617AA
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897617AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Jeep Wrangler Lower Pressure Cut-Off Switch Part Number: 5015872AC
Product Specifications
- Other Name: Switch - A/C Low Pressure Cut Off; Compressor Cut-Out; HVAC Pressure Switch; Trinary Switch.; Switch A/C Low Pressure Cut Off 05015872Ac; Switch A/C Low Pressure Cut Off
- Replaces: 5015872AA, 5015872AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015872AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.5L L4, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler A/C Compressor Cut-Out Switches Parts and Q&A

Q: What Are A/C Compressor Cut-Out Switches and How Do They Function on 2002 Jeep Wrangler?
A: Before you start handling the high pressure sensor/switch, disconnect and disconnect the negative battery lead. Disconnect the wire harness connector from the high pressure switch which is installed on the main discharge line desiding the compressor. Unscrew the high pressure switch from its position on the discharge line fitting and remove the O-ring seal as you discard it. When fitting the discharge line with a new O-ring seal, grease it with tartget specific refrigerant oil and be sure to only use O-rings manufactured from the materials advised by the R-134a system for your car. After that, put the end of the high pressure switch into the discharge line fitting, push the wire harness connector into the switch and reconnect the battery negative cable last.