OEM 2004 Dodge Dakota Air Bag

2004 Dodge Dakota Air Bag Parts and Q&A

• Q: What Actions Are Necessary After an Air Bag Deployment on 2004 Dodge Dakota?

  A: Whenever a supplemental restraint system is deployed, the vehicle can only be put back in service after the deployed restraints are replaced. When the driver air bag activates, the steering column assembly as well as the Clock Spring must be changed. All seat belt tensioners on quad cabs are required to be replaced whenever a front air bag deploys. They can't be replaced and sometimes are reduced in strength, but this is not always visible to the naked eye. After any vehicle impact damage, make certain to check and repair the mounting surfaces plus mounting bracket of the air bag Control Module (ACM) to its original state because the ACM includes impact sensors important for the supplementary restraint system. air bags can fail to deploy in an emergency or go off at the wrong moment if the ACM is not properly fastened or angled. All other parts in the vehicle ought to be closely examined after the air bag deploys and repaired or replaced only when damage can be seen. Once the device is activated, the vehicle seat may look like it's dusty with fine particles left by the firework and, in some cases, a powder containing sodium hydroxide which might cause some irritation for the skin and lungs. As a result, gloves, safety glasses and a long-sleeve top should be put on while cleaning up. If you develop skin irritation, rinse it gently with water and if the nose or throat is irritated, leave the car and pause until the feeling goes away; if symptoms persist, speak with a doctor. Use a vacuum cleaner to take away all remaining powder from the inside, cleaning from the outsides inward to protect yourself from the dirt. It's important to vacuum the outlets for the heater and air conditioner, with the blower running slowly so that any powder is released outdoors. Non-deployed and faulty supplemental restraints must be safely disposed of following the Hazardous Substance Control System and ensuring compliance with all state, provincial, local and federal regulations on covering and removing manufactured units. The final step is to follow the suitable removal process for the air bag, then vacuum the inside of the car a second time to catch residual powder.