How to Service and Repair a Brake Master Cylinder on 2005 Jeep Grand Cherokee?

To fix the brake master cylinder, siphon the brake master cylinder, then disconnect the primary and secondary brake tube, and the brake fluid level switch. Remove the master cylinder, bleed the new one and install it with a new gasket. Reconnect the tubes and fill up the brake system.

OEM 2005 Jeep Grand Cherokee Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2005 Jeep Grand Cherokee Master Cylinder Part Number: 5143279AA
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.10 Pounds
- Item Dimensions: 9.9 x 6.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143279AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Jeep Grand Cherokee Master Cylinder Part Number: 5143289AA
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.00 Pounds
- Item Dimensions: 10.2 x 6.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143289AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2005 Jeep Grand Cherokee Brake Master Cylinder Parts and Q&A

Q: How to Service and Repair a Brake Master Cylinder on 2005 Jeep Grand Cherokee?
A: To fix the brake master cylinder, siphon the brake master cylinder, then disconnect the primary and secondary brake tube, and the brake fluid level switch. Remove the master cylinder, bleed the new one and install it with a new gasket. Reconnect the tubes and fill up the brake system.