JeepParts
My Garage
My Account
Cart
OEM 2005 Jeep Wrangler A/C Hose
Air Conditioning Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 A/C Hoses found
2005 Jeep Wrangler A/C Hoses Part Number: 55037599AE
$129.34 MSRP: $195.00You Save: $65.66 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Line A/C Discharge Contains Items 2 To 7; Line A/C Discharge
- Item Weight: 2.40 Pounds
- Item Dimensions: 27.3 x 10.1 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037599AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Jeep Wrangler A/C Hoses Part Number: 55037602AE
Product Specifications- Other Name: Line - A/C Suction; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction Contains Items 37 To 40; Line A/C Suction
- Item Weight: 1.50 Pounds
- Item Dimensions: 38.6 x 13.0 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037602AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Jeep Wrangler Discharge Hose Part Number: 55037579AD
Product Specifications- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; A/C Hoses; Line A/C Discharge Contains Items 3 To 8
- Replaces: 55037579AC
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037579AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Jeep Wrangler A/C Hoses Part Number: 55037581AG
Product Specifications- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Line A/C Liquid Contains Items 9 To 13
- Item Weight: 1.40 Pounds
- Item Dimensions: 25.4 x 24.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037581AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Jeep Wrangler A/C Hoses Part Number: 55037706AE
Product Specifications- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Line A/C Liquid Contains Items 10 To 14; Line A/C Liquid
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037706AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Jeep Wrangler A/C Hose Parts and Q&A
- Q: How to Replace an A/C Hose in an HVAC System for Suction Hose on 2005 Jeep Wrangler?A: First, unplug the battery's negative cable and block its end before trying to replace the A/C suction hose/line. Carefully take the suction line out of the plastic clip between the accumulator and take the secondary clip off the spring-lock joining the suction line with the evaporator outlet tube. With the proper line tool, remove the suction line fitting at the evaporator outlet tube and toss the existing O-ring seal. Place tape over the open suction line fitting and also over the evaporator opening in the inner well section. Lift off the bolts or nuts that are fastening the connection between the suction line and the compressor, discard the O-ring seal and with tape or plugs, seal up any gaps left by your removal. Take out the nuts securing the suction lines, free the suction lines from the accumulator, throw away the O-rings from the open ends, cover the openings of these parts with plugs or tape and then remove the suction lines from your car. When putting in components, cut off the covering tape or plugs of each opened suction line fitting and each accumulator port, lubricate the rubber O-ring seals found with clean refrigerant oil and put these on the suction line fittings, making sure all parts are made for R-134a systems and oil for the compressor in the vehicle. After that, attach the suction lines to the accumulator and put two nuts on each suction line fitting. Tighten each nut to 2.2 Nm (20 in. lbs.). After opening the suction line fitting and compressor inlet port, slide a new O-ring seal lubed with clean refrigerant oil onto the opening in the fitting and install the line on the compressor, using the right bolt or nut at 25.4 Nm (20 ft. lbs.). Unplug the lines or remove the tapes from the suction line fitting and the accumulator outlet tube, place a new O-ring seal, greased with clean oil, on the suction line fitting and attach it. Connect your suction line spring-lock coupler to the evaporator outlet tube and then install the secondary retaining clip onto the coupler. Lastly, put the suction line into the plastic retaining clip near the accumulator. After that, join the negative battery cable, empty the refrigerant system and fill it with the refrigerant.
Related 2005 Jeep Wrangler Parts
2005 Jeep Wrangler Blend Door Actuator
2005 Jeep Wrangler Heater Core
2005 Jeep Wrangler Blower Motor
2005 Jeep Wrangler A/C Compressor
2005 Jeep Wrangler Blower Motor Resistor
2005 Jeep Wrangler Evaporator
2005 Jeep Wrangler A/C Accumulator
2005 Jeep Wrangler A/C Clutch
2005 Jeep Wrangler A/C Compressor Cut-Out Switches
2005 Jeep Wrangler A/C Condenser
2005 Jeep Wrangler A/C Switch
2005 Jeep Wrangler HVAC Pressure Switch