How to Service the Air Bag Sensor in the C-Pillar on 2006 Chrysler Pacifica?

To access the C-Pillar impact sensor, first remove the hood and switch off the battery's negative cable, then give the reserve capacitor two minutes to discharge. Take out the quarter trim panel next to the door where the replacement is planned. After that, use a torx wrench to remove the one screw next to the sensor and the one at the base of the sensor, take off the connector and pull out the sensor. First, fit the sensor in its designated area and attach the electrical connection to it. Attach the sensor using two retaining screws, set them to 7.3 N.m (65 in. lbs.) and reposition the quarter trim panel. No battery negative cable should be connected until the air bag system test is done to avoid any damage to occupants. Be sure to test drive the vehicle once more before putting the hood back on.

OEM 2006 Chrysler Pacifica Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2006 Chrysler Pacifica Impact Sensor, Front Part Number: 4671779AC
$48.02 MSRP: $103.00
You Save: $54.98 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671779AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Impact Sensor, Front Part Number: 4896059AA
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
- Position: Front
- Replaces: 4896023AA, 4686957AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896059AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Chrysler Pacifica Air Bag Sensor Parts and Q&A

Q: How to Service the Air Bag Sensor in the C-Pillar on 2006 Chrysler Pacifica?
A: To access the C-Pillar impact sensor, first remove the hood and switch off the battery's negative cable, then give the reserve capacitor two minutes to discharge. Take out the quarter trim panel next to the door where the replacement is planned. After that, use a torx wrench to remove the one screw next to the sensor and the one at the base of the sensor, take off the connector and pull out the sensor. First, fit the sensor in its designated area and attach the electrical connection to it. Attach the sensor using two retaining screws, set them to 7.3 N.m (65 in. lbs.) and reposition the quarter trim panel. No battery negative cable should be connected until the air bag system test is done to avoid any damage to occupants. Be sure to test drive the vehicle once more before putting the hood back on.