How to Locate, Remove, and Install a Coolant Temperature Sensor on 2006 Jeep Liberty?

You will find the Engine Coolant Temperature (ECT) sensor in the water jacket right before the generator at the rear end of the intake manifold. Make sure not to get harmed by hot, pressurized coolant, so first drain the cooling system to about mid-level. After that, pull out the sensor by unplugging its electrical connector from the intake manifold. Thread sealant should be applied to the sensor posts just before you install the sensor in the engine again. Screw the coolant temperature sensor tight to 11 Nm (8 ft. lbs.) and add enough coolant to refill the engine.

OEM 2006 Jeep Liberty Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Temperature Sensors found

View related parts
2006 Jeep Liberty Coolant Temperature Sensor Part Number: 5066779AA
$76.65 MSRP: $115.00
You Save: $38.35 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Temperature Sensor; Sensor Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066779AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- Limited, Sport | 4 Cyl 2.8 L DIESEL
View related parts
2006 Jeep Liberty Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027873
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS

2006 Jeep Liberty Coolant Temperature Sensor Parts and Q&A

Q: How to Locate, Remove, and Install a Coolant Temperature Sensor on 2006 Jeep Liberty?
A: You will find the Engine Coolant Temperature (ECT) sensor in the water jacket right before the generator at the rear end of the intake manifold. Make sure not to get harmed by hot, pressurized coolant, so first drain the cooling system to about mid-level. After that, pull out the sensor by unplugging its electrical connector from the intake manifold. Thread sealant should be applied to the sensor posts just before you install the sensor in the engine again. Screw the coolant temperature sensor tight to 11 Nm (8 ft. lbs.) and add enough coolant to refill the engine.