How to install a Blower Motor Resistor on 2007 Dodge Nitro?

The HVAC housing 4 should be used to position the blower motor resistor 1 onto the heater assembly. Insert the two screws 3 and tighten each to 1.2 Nm (10 in. lbs.). Attach connector 2 of the wire harness to the blower motor resistor, close the glove box and then reconnect the negative battery cable.

OEM 2007 Dodge Nitro Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2007 Dodge Nitro Resistor Part Number: 68003998AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Blower Motor Resistor Parts and Q&A

Q: How to install a Blower Motor Resistor on 2007 Dodge Nitro?
A: The HVAC housing 4 should be used to position the blower motor resistor 1 onto the heater assembly. Insert the two screws 3 and tighten each to 1.2 Nm (10 in. lbs.). Attach connector 2 of the wire harness to the blower motor resistor, close the glove box and then reconnect the negative battery cable.