JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Nitro A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2007 Dodge Nitro Condenser Part Number: 68003971AC
$398.91 MSRP: $604.00You Save: $205.09 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cooler - Condenser And Transmission Cooler; A/C Condenser; Condenser A/C; Cooler Condenser And Transmission Cooler; Condenser A/C And Transmission Cooler
- Item Weight: 10.10 Pounds
- Item Dimensions: 9.4 x 28.5 x 34.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003971AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro Condenser Part Number: 68003971AB
Product Specifications- Other Name: Cooler - Condenser And Transmission Cooler; A/C Condenser; Automatic Transmission Oil Cooler Assembly; Condenser A/C And Transmission Cooler, 25 Pc Min Qty, Use Mopar.Com to Order.
- Item Weight: 5.50 Pounds
- Item Dimensions: 34.5 x 28.1 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003971AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro A/C Condenser Parts and Q&A
- Q: How to Remove an A/C Condenser on 2007 Dodge Nitro?A: Before removing the A/C condenser, first remove the negative battery cable and then drain out the refrigerant. Then, take out the engine air cleaner housing and the secondary retaining clip and unhook the A/C liquid's connection from the condenser tube using the proper A/C line disconnect tool in the Special Tool Kit 7193 or its equivalent. Disconnect the grille and, if you have an automatic gearbox, remove the cooler lines from the trans. cooler section of the A/C condenser. Take the right side condenser air seal out of the way and turn and tilt the A/C discharge line a little to open up the condenser retaining bolt. Extricate the nut holding the A/C discharge line to the A/C condenser and free the discharge line. Release the two bolts on the left of the radiator that hold the A/C condenser in place and directly lift up the condensing unit to free the A/C condenser from the joining brackets. Whenever required, pull out the A/C condenser receiver/drier, dispose of the seals and gaskets, insert plugs into the opened refrigerant line fittings and tape over the ports at the condenser and receiver/ drier.
Related 2007 Dodge Nitro Parts
2007 Dodge Nitro Heater Core
2007 Dodge Nitro Blend Door Actuator
2007 Dodge Nitro Blower Motor
2007 Dodge Nitro A/C Compressor
2007 Dodge Nitro Evaporator
2007 Dodge Nitro A/C Accumulator
2007 Dodge Nitro A/C Expansion Valve
2007 Dodge Nitro A/C Hose
2007 Dodge Nitro A/C Service Cap
2007 Dodge Nitro A/C Switch
2007 Dodge Nitro A/C System Valve Core
2007 Dodge Nitro HVAC Pressure Switch