JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Nitro A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Expansion Valve found
2007 Dodge Nitro Expansion Valve Part Number: 68003989AA
$140.38 MSRP: $211.00You Save: $70.62 (34%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Valve - A/C Expansion; A/C Expansion Valve; Valve A/C Expansion; Valve Kit Expansion
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.7 x 3.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003989AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Nitro A/C Expansion Valve Parts and Q&A
- Q: How is an A/C Expansion Valve Installed in a Cooling System on 2007 Dodge Nitro?A: Eliminate the tape, plugs or similar devices covering the ends of each refrigerant line, evaporator tube and expansion valve port to install the expansion valve. Coat fresh O-rings with clean refrigerant oil and place them onto the R-134a A/C system's refrigerant lines and evaporator fittings. After that, mount the A/C expansion valve onto the evaporator tube tapping block using two bolts and tighten them to a torque of 11 Nm (97 in. lbs.). After joining the A/C suction and liquid lines to the expansion valve, put the nut in place and tighten it to 23 Nm (17 ft. lbs.). At last, attach the negative battery cable, release all the refrigerant and fill up the system again.
Related 2007 Dodge Nitro Parts
2007 Dodge Nitro Heater Core
2007 Dodge Nitro Blend Door Actuator
2007 Dodge Nitro Blower Motor
2007 Dodge Nitro A/C Compressor
2007 Dodge Nitro A/C Condenser
2007 Dodge Nitro Evaporator
2007 Dodge Nitro A/C Accumulator
2007 Dodge Nitro A/C Hose
2007 Dodge Nitro A/C Service Cap
2007 Dodge Nitro A/C Switch
2007 Dodge Nitro A/C System Valve Core
2007 Dodge Nitro HVAC Pressure Switch