OEM 2007 Jeep Liberty Blower Motor

2007 Jeep Liberty Blower Motor Parts and Q&A

• Q: How to Safely Service a Blower Motor on 2007 Jeep Liberty?

  A: Before working on the blower motor on a car with air bags, first pull out the battery negative cable, leave the car for two minutes and then disconnect the positive terminal. It is important to check that no debris is on the top of the dash panel, since it could voice the fresh air inlet screen or produce noise with the blower motor; use the vacuum to clear anything found. All you need to do to access the blower motor is to open the storage above the instrument panel, not remove the panel itself or the HVAC case from its housing. Remove the negative battery lead first, before taking the wire harness plug off of the blower motor socket (4). Leave the gap open for (3), then detach the fastener for (2) and spin the blower motor counterclockwise. Next, move the blower motor up and down and turn it to clean both the blower and the wheel in the HVAC housing.