Other Name: Actuator - A/C And Heater; HVAC Defrost Mode Door Actuator; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator A/C And Heater
Item Weight: 0.80 Pounds
Item Dimensions: 10.1 x 4.0 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5066510AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator; A/C and Heater Floor and Defrost Door.
Item Weight: 0.80 Pounds
Item Dimensions: 8.2 x 4.2 x 3.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5066518AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
2007 Jeep Liberty Blend Door Actuator Parts and Q&A
Q: How to Install the Blend Door Actuator for Panel or Floor/Defrost Settings on 2007 Jeep Liberty?
A: Put the hole of the actuator (2 or 4) over the hooked pin at the end of the door lever on the HVAC housing at the driver's side (5). After that, put on each actuator to its own actuator mount and pair the vacuum harness connectors (1 and 3) with the actuators as the instructions advise. When you're done, add the knee blocker and link the negative battery cable again.