How to Install a Blower Motor in an HVAC System on 2007 Jeep Wrangler?

To fit the blower motor, set it into the HVAC housing at the bottom. Install the blower motor into the HVAC housing and use the three screws to secure it, until they reach 1.2 Nm (10 in. lbs.) tightness. Remove the instrument panel wire harness from the connector and join it to the blower motor. After that, reconnect the negative battery cable.

OEM 2007 Jeep Wrangler Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2007 Jeep Wrangler Blower Motor Part Number: 68004195AA
$138.26 MSRP: $207.00
You Save: $68.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Blower Assembly; Motor Blower With Wheel; HVAC Blower Motor
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.2 x 10.1 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68004195AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Blower Motor Parts and Q&A

Q: How to Install a Blower Motor in an HVAC System on 2007 Jeep Wrangler?
A: To fit the blower motor, set it into the HVAC housing at the bottom. Install the blower motor into the HVAC housing and use the three screws to secure it, until they reach 1.2 Nm (10 in. lbs.) tightness. Remove the instrument panel wire harness from the connector and join it to the blower motor. After that, reconnect the negative battery cable.