How to Properly Install and Secure the A/C Switch to the Instrument Panel Center Bezel on 2009 Dodge Viper?

Set the A/C-heater control (5) into the center of the instrument panel bezel and put in the two screws (2) that hold it in place, securing them with equal effort to 2 Nm (17 in. lbs.). Attach wires from the connector (3) and (4) to the back of the A/C-heater control. After that, put the instrument panel center bezel in place.

OEM 2009 Dodge Viper A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Switch found

View related parts
2009 Dodge Viper Heater Control Part Number: 4865810AD
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
- Replaces: 4865810AA, 4865810AB, 4865810AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.1 x 3.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865810AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper A/C Switch Parts and Q&A

Q: How to Properly Install and Secure the A/C Switch to the Instrument Panel Center Bezel on 2009 Dodge Viper?
A: Set the A/C-heater control (5) into the center of the instrument panel bezel and put in the two screws (2) that hold it in place, securing them with equal effort to 2 Nm (17 in. lbs.). Attach wires from the connector (3) and (4) to the back of the A/C-heater control. After that, put the instrument panel center bezel in place.