How to Remove and Install a Steering Column Cover on Chrysler Town & Country?

Slowly release the belt loops using a trim stick at the right edge of the lower steering column cover. Then, pull the cover gently back toward yourself to pop out the spring clips and take it off the vehicle. Following this, unscrew the three fasteners holding the end cap to the panel and slide it forward to remove it and release the spring clips. Make sure the end cap is fitted where the accident occurred, then push the spring clips into their holes. Connect the left side of the cover to the column, fit the ridge along the bottom of the cover into the end cap and next, aim the cover toward the instrument panel so its belt loops fit into place beneath it. Place the lower steering column cover where it belongs, slide in and clip each of the spring clips and screw the two bolts.

How to Install a Steering Column Cover on the Instrument Panel on Chrysler 300?

If the instrument panel steering column cover reinforcement (1) is not already in place, first put (1) onto the bracket (2) before installing the steering column opening cover. Attach the reinforcement to the bracket by fixing the screws (3) into place. Following this, put the steering column cover in the vehicle and link the release cable to the emergency brake handle located outside. If you have the wire harness, link the connector (3) to the trunk release switch. Mount the steering column cover to the instrument panel, making sure the clutch retainers are found at the top and right edges after you push down. Securely tighten the bottom two and top two screws that join the steering column cover (1) to the instrument panel.

OEM Chrysler Steering Column Cover

Steering Column Cover Bezel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

226 Steering Column Covers found

View related parts
Chrysler Switch Cover, Upper Part Number: YJ31ZJ8AA
$23.46 MSRP: $29.74
You Save: $6.28 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud; Shroud Steering Column
- Position: Upper
Fits the following Chrysler Models:
- Town & Country | 2005-2007 | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Switch Cover, Gray, Upper Part Number: YJ34XDVAA
$18.92 MSRP: $23.99
You Save: $5.07 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud; Shroud Steering Column
- Position: Upper
Fits the following Chrysler Models:
- Town & Country | 2005-2007 | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Column Cover Part Number: 1EJ26XDVAC
$44.38 MSRP: $50.90
You Save: $6.52 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Steering Column; Steering Column Cover; Cover Steering Column
- Replaces: 1EJ26XDVAB
Fits the following Chrysler Models:
- Sebring | 2009-2010 | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Upper Shroud, Beige Part Number: 1NZ98HL9AF
$15.49 MSRP: $35.45
You Save: $19.96 (57%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud; Shroud Steering Column Upper
- Position: Upper
- Replaces: 1NZ98HL9AB, 1NZ98HL9AE, 1NZ98HL9AC, 1NZ98HL9AD
Fits the following Chrysler Models:
- Town & Country | 2011-2016 | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Glove Box, Beige Part Number: ZS61XT1AA
$65.87 MSRP: $108.00
You Save: $42.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Steering Column; Instrument Panel Knee Bolster; Column Cover; Cover Steering Column
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Lock Cover Part Number: 4680565AC
$18.94 MSRP: $29.85
You Save: $10.91 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Ignition Switch Bezel; Cover; Shroud Steering Column
Fits the following Chrysler Models:
- Town & Country | 2005-2007 | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Shroud Part Number: QH19SC8
$55.85 MSRP: $80.25
You Save: $24.40 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Shroud Steering Column
- Replaced by: QH19SC8AB
Fits the following Chrysler Models:
- Sebring | 1996-1997 | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Upper Shroud, Sandstone Part Number: QH17XTMAB
$24.51 MSRP: $31.07
You Save: $6.56 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Upper Cover; Shroud Steering Column Upper; Shroud Steering Column
- Position: Upper
Fits the following Chrysler Models:
- Sebring | 2001-2004 | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Lower Cover, Taupe Part Number: QH19WL8AB
$42.82 MSRP: $54.28
You Save: $11.46 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Column; Steering Column Cover, Lower; Lower Shroud; Shroud; Shroud Steering Column Lower; Shroud Steering Column
- Position: Lower
Fits the following Chrysler Models:
- Sebring | 2001-2006 | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Upper Column Cover, Black Part Number: MR791369
$15.39 MSRP: $19.50
You Save: $4.11 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud; Steering Column Cover, Upper; Cover Steering Column
- Position: Upper
Fits the following Chrysler Models:
- Sebring | 2001-2005 | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Lower Cover, Dark Gray Part Number: QH19XDVAB
$53.52 MSRP: $67.85
You Save: $14.33 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Lower Shroud; Shroud Steering Column Lower; Shroud Steering Column
- Position: Lower
Fits the following Chrysler Models:
- Sebring | 2001-2006 | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Lower Cover, Sandstone Part Number: QH19XTMAB
$19.67 MSRP: $24.94
You Save: $5.27 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Lower Shroud; Shroud Steering Column Lower; Shroud Steering Column
- Position: Lower
Fits the following Chrysler Models:
- Sebring | 2001-2004 | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Upper Shroud, Green/Tan Part Number: QH17ZP7AB
$2.47 MSRP: $3.13
You Save: $0.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Upper Cover; Shroud Steering Column Upper
- Position: Upper
Fits the following Chrysler Models:
- Sebring | 2005-2006 | Base, GTC, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Lower Cover, Green/Tan Part Number: QH19ZP7AB
$4.87 MSRP: $6.17
You Save: $1.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Lower Shroud; Shroud Steering Column Lower
- Position: Lower
Fits the following Chrysler Models:
- Sebring | 2005-2006 | Base, GTC, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Lower Cover, Sandstone Part Number: QH24XTMAB
$13.47 MSRP: $17.07
You Save: $3.60 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Lower Shroud; Shroud Steering Column Lower; Shroud Steering Column
- Position: Lower
Fits the following Chrysler Models:
- Sebring | 2002-2003 | GTC, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Lower Shroud, Dark Gray Part Number: 1GA13XDVAC
$73.70 MSRP: $84.55
You Save: $10.85 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud Steering Column Lower
- Position: Lower
- Replaces: 1GA13XDVAA, 1GA13XDVAB
Fits the following Chrysler Models:
- Sebring | 2008-2010 | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Upper Shroud Part Number: 1GM31XDVAA
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud; Shroud Steering Column Upper
- Position: Upper
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Lower Shroud, Slate Gray Part Number: 1GM32BD5AA
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud; Shroud Steering Column Lower
- Position: Lower
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Lower Shroud, Slate Gray Part Number: 1GZ32BD5AA
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud; Shroud Steering Column Lower
- Position: Lower
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Lower Shroud, Beige Part Number: 1GZ32DK5AA
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud; Shroud Steering Column Lower
- Position: Lower
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

| Page 1 of 12 |Next >

1-20 of 226 Results

Chrysler Steering Column Cover

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Steering Column Cover for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Steering Column Cover protects the column, hides the wiring, and provides a neat appearance to the cockpit. Chrysler has been advocating strong constructions and a smooth ride since 1925 through suppression of engine vibration with Floating Power. The company pursued airflow benefits with aggressive shapes such as the Airflow, and boxy drag was exchanged for smooth cabins. Chrysler could balance family responsibility and clever packaging in minivans that had sliding doors and expansive floor space. The value was important, and that is why the pricing remained direct and buying remained direct, which eliminated the drama of showroom sweep. There were additional interior refinements that continued, adding legroom, cushioning bumps, and making long commutes a soothing routine. That continuous improvement demonstrates the tendency of the brand to combine practical concepts with the style that feels a step above. A Steering Column Cover is placed over the steering shaft, creating a rough shell that protects some delicate switches and wiring. The Steering Column Cover is made of plastic, which is a durable material and therefore does not get scratched easily, can block dust, and prevents the jamming of mechanisms with loose objects. The result of replacing a worn Steering Column Cover is a sharp turning wheel and a cockpit that appears factory-clean, and because of its simple assembly and installation, it maintains Chrysler interiors looking new. The new Steering Column Cover is installed on the existing fastener locations, which means that without any drilling, the new cover attaches perfectly to the shroud edges to eliminate rattles regardless of the Chrysler wheel arrangement.

Chrysler Steering Column Cover Parts and Q&A

Switch Cover, Upper
YJ31ZJ8AA
Q: How to Remove and Install a Steering Column Cover on Chrysler Town & Country?
A:
Slowly release the belt loops using a trim stick at the right edge of the lower steering column cover. Then, pull the cover gently back toward yourself to pop out the spring clips and take it off the vehicle. Following this, unscrew the three fasteners holding the end cap to the panel and slide it forward to remove it and release the spring clips. Make sure the end cap is fitted where the accident occurred, then push the spring clips into their holes. Connect the left side of the cover to the column, fit the ridge along the bottom of the cover into the end cap and next, aim the cover toward the instrument panel so its belt loops fit into place beneath it. Place the lower steering column cover where it belongs, slide in and clip each of the spring clips and screw the two bolts.
Shroud
UU30XXXAD
Q: How to Install a Steering Column Cover on the Instrument Panel on Chrysler 300?
A:
If the instrument panel steering column cover reinforcement (1) is not already in place, first put (1) onto the bracket (2) before installing the steering column opening cover. Attach the reinforcement to the bracket by fixing the screws (3) into place. Following this, put the steering column cover in the vehicle and link the release cable to the emergency brake handle located outside. If you have the wire harness, link the connector (3) to the trunk release switch. Mount the steering column cover to the instrument panel, making sure the clutch retainers are found at the top and right edges after you push down. Securely tighten the bottom two and top two screws that join the steering column cover (1) to the instrument panel.