How to Maintain and Fix a Wiper Switch on Jeep Liberty?

To work on or repair the wiper switch, you should first disconnect the battery negative cable, wait two minutes to allow the SRS capacitor to drained and then disallow the rest system from engaging. The upper and lower shrouds should be removed from the steering column first. Following that, take out the screw that holds the right multi-function switch to the Clock Spring bracket on the right of the instrument cluster. Move the switch so it's opposite the Clock Spring to take the slide tabs of the switch housing out of their matching formations in the mounting bracket. Then, remove the jumper wire harness connector from the connector receptacle on the inboard end of the right multi-function switch, before you can take out the switch.

How to Safely Install and Align a Wiper Switch on Jeep Liberty?

Prior to installing the right multi-function switch, turn off the SRS by pulling the battery negative cable out, waiting for two minutes and then isolating it to keep the SRS from activating by mistake. Location and connect the right multi-function switch next to the Clock Spring mounting bracket's side and link the jumper wire harness connector to the connector on the right side of the switch housing. Arrange the slide tabs from the switch onto the pattered portions of the bracket and move the switch into the bracket until it is properly aligned. Put the mounting tab for the right multi-function switch on the back and tighten the screw to secure it to the Clock Spring, at 1 Nm (10 in. lbs). On the steering column, place the upper shroud back and then place the lower shroud as well. Finally, attach the battery negative cable again.

OEM Jeep Liberty Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wiper Switches found

View related parts
Jeep Liberty Turn Signal Switch Part Number: 68015101AG
$89.70 MSRP: $135.00
You Save: $45.30 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 68015101AE, 68015101AD, 68015101AC, 68015101AF, 68015101AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Turn Signal Switch Part Number: 68041491AD
$121.54 MSRP: $184.00
You Save: $62.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Combination Switch; Multi Purpose Switch; Multifunction Switch; Switch Multifunction
- Replaces: 68024197AB, 68041491AB, 68041491AC, 68041491AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Wiper Switch Part Number: 68003215AD
$146.07 MSRP: $222.00
You Save: $75.93 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Wiper; Windshield Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch Wiper
- Replaces: 68003215AC, 5183957AA, 68003215AB, 68003215AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Multifunction Switch Part Number: 68015102AF
$162.84 MSRP: $247.00
You Save: $84.16 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch Housing.; Switch Multifunction
- Replaces: 68015102AC, 68015102AA, 68015102AB, 68015102AD, 68015102AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Jeep Liberty | Jet, Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Turn Signal Switch Part Number: 68041485AD
$112.62 MSRP: $172.00
You Save: $59.38 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Signal Switch; Switch Multifunction
- Replaces: 5183947AC, 68041485AA, 68041485AB, 5183947AA, 68041485AC, 5183947AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Turn Signal Switch Part Number: 5183952AF
$44.94 MSRP: $66.60
You Save: $21.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5183952AA, 5183952AC, 5183952AB, 5183952AD, 5183952AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Turn Signal Switch Part Number: 5183950AF
Product Specifications
- Other Name: Switch - Multifunction; Steering Column Switch Housing; Combination Switch; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch Multifunction
- Replaces: 5183950AE, 5183950AD, 5183950AC, 5183950AB, 5183950AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Liberty | Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Turn Signal Switch Part Number: 5183946AF
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch Multifunction
- Replaces: 5183946AA, 5183946AD, 5183946AE, 5183946AB, 5183946AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Liberty Wiper Switch

Choose OEM Wiper Switch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wiper Switch follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Liberty Wiper Switch Parts and Q&A

Turn Signal Switch
5183950AF
Q: How to Maintain and Fix a Wiper Switch on Jeep Liberty?
A:
To work on or repair the wiper switch, you should first disconnect the battery negative cable, wait two minutes to allow the SRS capacitor to drained and then disallow the rest system from engaging. The upper and lower shrouds should be removed from the Steering Column first. Following that, take out the screw that holds the right multi-function switch to the Clock Spring bracket on the right of the instrument cluster. Move the switch so it's opposite the Clock Spring to take the slide tabs of the switch housing out of their matching formations in the mounting bracket. Then, remove the jumper wire harness connector from the connector receptacle on the inboard end of the right multi-function switch, before you can take out the switch.
Turn Signal Switch
5183946AF
Q: How to Safely Install and Align a Wiper Switch on Jeep Liberty?
A:
Prior to installing the right multi-function switch, turn off the SRS by pulling the battery negative cable out, waiting for two minutes and then isolating it to keep the SRS from activating by mistake. Location and connect the right multi-function switch next to the Clock Spring mounting bracket's side and link the jumper wire harness connector to the connector on the right side of the switch housing. Arrange the slide tabs from the switch onto the pattered portions of the bracket and move the switch into the bracket until it is properly aligned. Put the mounting tab for the right multi-function switch on the back and tighten the screw to secure it to the Clock Spring, at 1 Nm (10 in. lbs). On the Steering Column, place the upper shroud back and then place the lower shroud as well. Finally, attach the battery negative cable again.