How to Service and Repair an ABS Control Module on 2005 Chrysler Pacifica?

Before working on the Electronic Brake Control Module, first release the negative battery cable from the battery post and remove it from the ignition system. Elevate and hold the vehicle and then remove the 3 screws that keep the Cab in place on the Hcu. After sliding the Cab off the Hcu, remove the 47-way wiring connector at the Cab. To install, link the 47-way connector on the Cab to the Hcu, position the solenoids and pump/motor wiring at the valves and connector passage of the Hcu and put the Cab over the Hcu. Set the 3 screws onto the Cab to the Hcu and firm them down to 2 N.m (17 in. lbs.) torque. Afterwards, let the vehicle lower and hook up the negative battery cable to the battery once again. Afterwards, link the Drbiii(R) to turn on the Cab and monitor the fault status before cutting them out.

OEM 2005 Chrysler Pacifica ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2005 Chrysler Pacifica Control Module Part Number: 5142279AA
$161.99 MSRP: $205.36
You Save: $43.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; Module Anti-Lock Brakes
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.1 x 7.2 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142279AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chrysler Pacifica Control Module Part Number: 5142282AA
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; Module Anti-Lock Brakes
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142282AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chrysler Pacifica Modulator Part Number: 5142280AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Hydraulic Control Unit Anti-Lock Brake System
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142280AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chrysler Pacifica Modulator Part Number: 5142277AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Hydraulic Control Unit Anti-Lock Brake System
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142277AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2005 Chrysler Pacifica ABS Control Module Parts and Q&A

Q: How to Service and Repair an ABS Control Module on 2005 Chrysler Pacifica?
A: Before working on the Electronic Brake Control Module, first release the negative battery cable from the battery post and remove it from the ignition system. Elevate and hold the vehicle and then remove the 3 screws that keep the Cab in place on the Hcu. After sliding the Cab off the Hcu, remove the 47-way wiring connector at the Cab. To install, link the 47-way connector on the Cab to the Hcu, position the solenoids and pump/motor wiring at the valves and connector passage of the Hcu and put the Cab over the Hcu. Set the 3 screws onto the Cab to the Hcu and firm them down to 2 N.m (17 in. lbs.) torque. Afterwards, let the vehicle lower and hook up the negative battery cable to the battery once again. Afterwards, link the Drbiii(R) to turn on the Cab and monitor the fault status before cutting them out.