How to Install an A/C Clutch on Chrysler 300?

Put the dowel pin of the back of the compressor clutch field coil into the hole in the front of the A/C compressor. The lead wire should not be trapped as you put the coil onto the compressor. Use a new snap ring to hold the compressor clutch field coil with the bevel side exposed and the eyelets next to the dowel pin hole. With Snap Ring Pliers 9764 or suitable, put the snap ring that holds the field coil in place, checking that it is completely seated. While installing the pulley and bearing, do not damage the friction surfaces and remember the bevel side of the snap ring should point outward. Either way, if you are reusing the originals, put the original shim(s) back on the shaft; for new parts, use a stack of 2.54 mm thick shims as a guide. Fit the clutch plate onto the A/C compressor and hold it in place by screwing in the compressor shaft bolt, ending up with a tightness of 19 Nm. Once the assembly is fastened, inspect the air gaps in several places and tack shims as required to keep them at 0.35 - 0.60 mm. Move the wire for the compressor clutch field coil behind the connector bracket, put the connector on the bracket and plug the engine wire harness into the connector. Reattach the negative battery cable and then mount the accessory drive belt, radiator fan and shroud assembly, air cleaner housing and air intake hose for those vehicles with a 5.7L or 6.1L engine.

How to Remove and Replace an A/C Clutch on Chrysler 300?

You must first take the negative battery cable off before you work on the compressor clutch assembly. Air intake hoses and the air cleaner housing should be removed from vehicles with 5.7L and 6.1L engines. After that, remove the radiator fan and shroud assembly from the engine compartment, then remove the accessory drive belt. Remove the engine wire harness from the compressor clutch field coil connector placed on the top of the A/C compressor. Many models call for taking out the A/C compressor to reach the compressor shaft bolt or pulley and field coil snap rings, yet the refrigerant system can stay fully topped off. Separate the compressor clutch field coil connector and its wire lead from the bracket. Take out the compressor shaft bolt and use an oil filter wrench to prevent the clutch plate from rotating. Be careful not to separate the clutch plate from the group of bearings and pulleys or else you may damage the plate and don't lose the clutch shims, because you will need them to reinstall the clutch plate. Gently hit the clutch plate with a plastic mallet which will release it from the splines attached to the compressor and then remove both the clutch and the shim(s). Use Snap Ring Pliers 9764 or similar to take out the snap ring holding the pulley and bearing assembly to the compressor and then remove the assembly. Then, use a similar tool to Snap Ring Pliers 9764 to take out the snap ring securing the compressor clutch field coil to the front of the A/C compressor and remove the field coil.

OEM Chrysler 300 A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 A/C Clutches found

View related parts
Chrysler 300 Clutch Kit Part Number: 68068755AA
$24.33 MSRP: $83.65
You Save: $59.32 (71%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - A/C Compressor; A/C Compressor Clutch; Repair Kit; A/C Compressor Clutch Overhaul Kit includes snap rings, washers, screws, and bolts.
- Replaced by: 68068755AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Clutch Coil Part Number: 5003681AA
$186.95 MSRP: $279.00
You Save: $92.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - A/C Clutch; A/C Compressor Clutch Coil; Clutch; Coil; Coil A/C Clutch; A/C Compressor Clutch
- Replaces: 5072863AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, C, C SRT8, LX, Limited, S, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Clutch Coil Part Number: 68242651AA
$266.26 MSRP: $396.00
You Save: $129.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - A/C Clutch; A/C Compressor Clutch Coil; Coil; Coil A/C Clutch; A/C Compressor Clutch
- Replaces: 68058043AA, 68058043AC, 68058043AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chrysler 300 | Base, C, C Luxury, Limited, S | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 68232396AC
$257.19 MSRP: $380.00
You Save: $122.81 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; Clutch Kit; Pulley Assembly; Clutch Plate & Hub Assembly; Pulley
- Replaced by: 68232396AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Clutch Kit Part Number: 5140428AA
$4.56 MSRP: $36.75
You Save: $32.19 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Package - A/C Compressor; A/C Compressor Clutch; Hardware Kit; Clutch Overhaul Kit A/C Compressor with Snap Rings, Washers, Screws, Pulley Bolt.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C, C SRT8, Limited, Touring | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Clutch Coil Part Number: 68232393AA
$171.08 MSRP: $257.00
You Save: $85.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - A/C Clutch; A/C Compressor Clutch Coil; Coil; Coil A/C Clutch; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Coil - A/C Clutch Part Number: 5140461AB
$122.73 MSRP: $257.00
You Save: $134.27 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: COIL-AIR CONDITIONING CLUTCH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 300 | C, C Luxury, S, SRT8, SRT8 Core | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Clutch Kit Part Number: 68232390AC
$226.60 MSRP: $334.00
You Save: $107.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - A/C Compressor; Repair Kit
- Replaces: 68232390AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 68084834AC
$256.06 MSRP: $379.00
You Save: $122.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley - A/C Compressor; A/C Compressor Clutch Pulley; Pulley Assembly; Clutch Plate & Hub Assembly; Pulley
- Replaces: 68084834AB, 68084834AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Clutch Kit Part Number: 68032119AA
$41.78 MSRP: $61.40
You Save: $19.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Package - A/C Compressor; A/C Compressor Clutch; Repair Kit; Clutch Overhaul Kit A/C Compressor with essential hardware components.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | C, S | 8 Cyl 5.7 L GAS
View related parts
Chrysler 300 Clutch Coil Part Number: 68232389AD
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
ADD TO CART
Product Specifications
- Other Name: Coil - A/C Clutch; Coil
- Replaced by: 68232389AE
- Replaces: 68232389AA, 68232389AC, 68232389AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | C, C Luxury, C Platinum, S, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 5179340AB
$299.82
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; A/C Compressor Clutch Pulley; A/C Compressor Clutch; Clutch Plate & Hub Assembly
- Replaces: 5179340AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler 300 | Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Clutch Kit Part Number: 68232388AD
$279.57 MSRP: $423.00
You Save: $143.43 (34%)
ADD TO CART
Product Specifications
- Other Name: Clutch - A/C Compressor; Repair Kit; Compressor Hardware Kit
- Replaced by: 68232388AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | C, C Luxury, C Platinum, S, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 68232392AC
$282.88 MSRP: $430.00
You Save: $147.12 (35%)
ADD TO CART
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; Clutch Kit; Clutch & Pulley; Pulley Assembly; Clutch Plate & Hub Assembly; Pulley
- Replaced by: 68232392AD
- Replaces: 68232392AA, 68232392AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | C, C Luxury, C Platinum, S, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 68084274AB
Product Specifications
- Other Name: Pulley - A/C Compressor; A/C Compressor Clutch Pulley; Serpentine Belt Drive Kit; Pulley Assembly; Clutch Plate & Hub Assembly; Pulley; Pulley Hub Kit A/C Compressor; A/C Compressor Clutch
- Replaces: 68084274AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chrysler 300 | Base, Limited | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 5140426AA
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; A/C Compressor Clutch Pulley; Clutch Plate & Hub Assembly; Pulley; Pulley Hub Kit A/C Compressor; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | C, C SRT8, Limited, Touring | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 5140425AA
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; A/C Compressor Clutch Pulley; Clutch Plate & Hub Assembly; Pulley Hub Kit A/C Compressor; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler 300 | Base | 6 Cyl 2.7 L GAS
View related parts
Chrysler 300 Clutch Part Number: 5140427AA
Product Specifications
- Other Name: Clutch Package - A/C Compressor; A/C Compressor Clutch; Clutch Overhaul Kit A/C Compressor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, LX, Touring | 6 Cyl 2.7 L GAS
View related parts
Chrysler 300 Clutch Coil Part Number: 68000489AC
Product Specifications
- Other Name: Coil - A/C Clutch
- Replaces: 68000489AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler 300 | Limited, S, Signature Series, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300 Hub Assembly Part Number: 68018353AA
Product Specifications
- Other Name: Pulley - A/C Compressor; A/C Compressor Clutch Pulley; Clutch Plate & Hub Assembly; Pulley Hub Kit A/C Compressor; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler 300 | Limited, S, Signature Series, Touring | 6 Cyl 3.5 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Chrysler 300 A/C Clutch

Choose OEM A/C Clutch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each A/C Clutch follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler 300 A/C clutch is an Air conditioning device and considered as an effectively reliable part commonly used in several Chrysler 300 models. This A/C Clutch effectively relays and transfers power from the engine to the A/C compressor for proper cooling once engaged. The clutch of the A/C dismantles when the A/C is off; it is allowed to rotate freely, which lessens the downturn on the engine, therefore increasing efficiency. The Chrysler 300 A/C Clutch fits any of the trims among the base, Touring, Limited, 300C, and SRT-8 editions, and so it is very practical for the car owners intending to keep their Chrysler 300 comfortable through the four different seasons. Part of the lessons learnt about its design is the fact that a well functioning A/C Clutch is safety measure that helps to avoid some conditions such as warm air blowing from the vents and strange operational noise, which is a sign of system malfunction. Diminishing the Chrysler 300 A/C Clutch through usage and replacing it with a new one when necessary is central to the effective durability of the air conditioning system. Studied separately, the A/C Clutch can be considered remarkable of the automotive market thanks to its high degree of assembly and integration with the progressive engineering of the Chrysler 300; including on the memories of the buyers who value the comfort and a powerful operating result in their cars.

Chrysler 300 A/C Clutch Parts and Q&A

Clutch Kit
5140428AA
Q: How to Install an A/C Clutch on Chrysler 300?
A:
Put the dowel pin of the back of the compressor clutch field coil into the hole in the front of the A/C compressor. The lead wire should not be trapped as you put the coil onto the compressor. Use a new snap ring to hold the compressor clutch field coil with the bevel side exposed and the eyelets next to the dowel pin hole. With Snap Ring Pliers 9764 or suitable, put the snap ring that holds the field coil in place, checking that it is completely seated. While installing the pulley and bearing, do not damage the friction surfaces and remember the bevel side of the snap ring should point outward. Either way, if you are reusing the originals, put the original shim(s) back on the shaft; for new parts, use a stack of 2.54 mm thick shims as a guide. Fit the clutch plate onto the A/C compressor and hold it in place by screwing in the compressor shaft bolt, ending up with a tightness of 19 Nm. Once the assembly is fastened, inspect the air gaps in several places and tack shims as required to keep them at 0.35 - 0.60 mm. Move the wire for the compressor clutch field coil behind the connector bracket, put the connector on the bracket and plug the engine wire harness into the connector. Reattach the negative Battery Cable and then mount the accessory Drive Belt, radiator fan and shroud assembly, air cleaner housing and air intake hose for those vehicles with a 5.7L or 6.1L engine.
Clutch Coil
5003681AA
Q: How to Remove and Replace an A/C Clutch on Chrysler 300?
A:
You must first take the negative Battery Cable off before you work on the compressor clutch assembly. Air intake hoses and the air cleaner housing should be removed from vehicles with 5.7L and 6.1L engines. After that, remove the radiator fan and shroud assembly from the engine compartment, then remove the accessory Drive Belt. Remove the engine wire harness from the compressor clutch field coil connector placed on the top of the A/C compressor. Many models call for taking out the A/C compressor to reach the compressor shaft bolt or pulley and field coil snap rings, yet the refrigerant system can stay fully topped off. Separate the compressor clutch field coil connector and its wire lead from the bracket. Take out the compressor shaft bolt and use an oil filter wrench to prevent the clutch plate from rotating. Be careful not to separate the clutch plate from the group of bearings and pulleys or else you may damage the plate and don't lose the clutch shims, because you will need them to reinstall the clutch plate. Gently hit the clutch plate with a plastic mallet which will release it from the splines attached to the compressor and then remove both the clutch and the shim(s). Use Snap Ring Pliers 9764 or similar to take out the snap ring holding the pulley and bearing assembly to the compressor and then remove the assembly. Then, use a similar tool to Snap Ring Pliers 9764 to take out the snap ring securing the compressor clutch field coil to the front of the A/C compressor and remove the field coil.