How to install a Brake Master Cylinder on Chrysler 300?

Before installing the brake master cylinder, be sure to completely bleed the master cylinder. It is necessary to change the vacuum seal on the master cylinder. Fit the new vacuum seal at the rear of the master cylinder so that it squares up in the groove. Put the master cylinder onto the studs provided by the booster, passing the booster push rod through the master cylinder's piston. Put the two master cylinder mounting nuts in place and tighten them to 15 Nm. Feed the brake tubes through the master cylinder ports and tighten the tube nuts with 20 Nm of torque. Snap the brake fluid level sensor wiring connector onto the metal plate inside the brake fluid reservoir. Reattach the battery negative cable to its post on the battery after you are done checking. Add only clean and freshly purchased Mopar(R) Brake Fluid into the master cylinder reservoir. Put the access panel on the cowl side. Try to have a firm brake pedal before operating your car; if you do not have a proper pedal, drain the entire system and check for breaks in any hoses. At the end, take the car out and check that the brakes are working properly.

How to Bleed a Brake Master Cylinder Before Installation on Chrysler Crossfire?

Place bleed tubes and a wood dowel on your new brake master cylinder; stroke the pistons gently so that any air inside the line gets released. Start by fastening the brake master cylinder into a vise with brass grips. After that, join the bleed tubes to the outlet valves on the cylinder, each tube fitted into the bottom of the reservoir. Pour in new brake fluid after that; next, press the pistons inward using the wood dowel. When the pulsing stops, release the pistons and watch them return by spring pressure until there are no more air bubbles in the fluid.

OEM Chrysler Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

52 Brake Master Cylinders found

View related parts
Chrysler Master Cylinder Part Number: 68211881AE
$335.37 MSRP: $494.00
You Save: $158.63 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Brake Reservoir; Reservoir; Master Cylinder Brake
- Replaces: 68211911AA, 68211881AD, 68211881AB, 68211915AA, 68211881AA
Fits the following Chrysler Models:
- 200 | 2015 | C, LX, Limited, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Master Cylinder Part Number: 68245358AC
$184.68 MSRP: $272.00
You Save: $87.32 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder
- Replaces: 68245358AA, 68245358AB
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Master Cylinder Part Number: 5139148AA
$316.89 MSRP: $401.71
You Save: $84.82 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- 300 | 2005-2007 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Master Cylinder Part Number: 5139153AA
$160.42 MSRP: $203.36
You Save: $42.94 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- 300 | 2005-2007 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Master Cylinder Part Number: 4721550AB
$193.29 MSRP: $355.00
You Save: $161.71 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Replaces: 4721550AC, 4721550AD
Fits the following Chrysler Models:
- Pacifica | 2004 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
- Town & Country | 2003-2005 | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2003 | LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Master Cylinder Part Number: 4764192
$159.25 MSRP: $229.00
You Save: $69.75 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- Cirrus | 1995-2000 | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
- Sebring | 1996-1999 | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Master Cylinder Part Number: 4721154AB
$432.64 MSRP: $552.00
You Save: $119.36 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Replaces: 4721154AD
Fits the following Chrysler Models:
- Pacifica | 2004-2006 | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
- Town & Country | 2003-2007 | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2003 | LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Master Cylinder Part Number: 5015160AA
$243.26 MSRP: $308.38
You Save: $65.12 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- PT Cruiser | 2001-2005 | Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Master Cylinder Part Number: 4294946
Product Specifications
- Other Name: Brake Master Cylinder; Master Cylinder, Complete, W/O Fluid Window; Master Cylinder, Complete
Fits the following Chrysler Models:
- Imperial | 1990-1993 | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- LeBaron | 1991-1993 | Base, GTC, LE, LX, Landau | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1989-1993 | Base, Fifth Avenue, Landau, Salon | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Town & Country | 1990-1995 | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Chrysler Master Cylinder Part Number: 4683264AD
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- Town & Country | 2001-2007 | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Master Cylinder Part Number: 4695192
Product Specifications
- Other Name: Master Cylinder W/ABS Tc; Master Cylinder Assembly, W/O ABS; Master Cylinder Brake
Fits the following Chrysler Models:
- Concorde | 1995-1997 | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
- LHS | 1995-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1995-1996 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Master Cylinder Part Number: 4779168AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- Concorde | 2002-2004 | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Master Cylinder Part Number: 5142503AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder
- Replaces: 5142503AA
Fits the following Chrysler Models:
- PT Cruiser | 2005-2010 | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Master Cylinder Part Number: 68048548AA
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
Fits the following Chrysler Models:
- 300 | 2009-2010 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Reservoir Tank Part Number: 5019400AA
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
Fits the following Chrysler Models:
- Sebring | 2001-2006 | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Overhaul Kit Part Number: MR493695
Product Specifications
- Other Name: Wheel Cylinder - Brake Master; Cylinder Brake Master
Fits the following Chrysler Models:
- Sebring | 2001-2005 | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Master Cylinder Part Number: 5142507AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder
- Replaces: 5142507AA
Fits the following Chrysler Models:
- PT Cruiser | 2005-2010 | Base, Classic, Couture Edition, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Master Cylinder Part Number: 4485301
Product Specifications
- Other Name: Master Cylinder Assembly Brake Co; Brake Master Cylinder; Master Cylinder, Complete, W/O Fluid Window; Master Cylinder, Complete
Fits the following Chrysler Models:
- Imperial | 1990 | Base | 6 Cyl 3.3 L GAS
- LeBaron | 1992-1993 | Base, GTC, LE, LX, Landau | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1990 | Fifth Avenue | 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Master Cylinder Part Number: 4509602
Product Specifications
- Other Name: Master Cylinder - Brake - Compensator 21Mm; Brake Master Cylinder; Master Cylinder, Complete
Fits the following Chrysler Models:
- E Class | 1984 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS
- Executive Limousine | 1985 | Base | 4 Cyl 2.6 L GAS
- Executive Sedan | 1984 | Base | 4 Cyl 2.6 L GAS
- Laser | 1984-1986 | Base, XE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- LeBaron | 1984-1990 | Base, GT, GTC, GTS, High Line, Mark Cross, Premium | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- New Yorker | 1984-1988 | Base, Landau, Turbo | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
- Town & Country | 1984-1988 | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS
View More
View related parts
Chrysler Master Cylinder Part Number: 4683264
Product Specifications
- Other Name: Master Cylinder - Complete; Master Cylinder Brake Assembly; Master Cylinder Assembly; Master Cylinder Brake
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Town & Country | 1996-2000 | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2000 | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More

| Page 1 of 3 |Next >

1-20 of 52 Results

Chrysler Brake Master Cylinder

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Brake Master Cylinder for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Brake Master Cylinder makes your pedal push certain hydraulic halting action every time. Floating Power mounts reduce vibration and airflow styling that cool cabins, making Chrysler driver comfort high, with body lines that are bright due to confidence on any street. Chrysler then unveiled spacious minivans that loaded fast, transported family, and sold without scene of haggling. Chrysler continues to optimize ride quality to make everyday drives a smooth and easy task and cargo transportation a simple task with foldable intelligent seats that absorb cracks in pavement and use suspensions to cushion bumps. Chrysler plays the smart pricing and interiors that do not waste a single space and utility that feels like it was designed to be applied in real life. Brake Master Cylinder is mounted in the front and has two reservoirs that divide the pressure into two lines such that one leak does not take away all the braking. Brake Master Cylinder is an inside cast iron or aluminum bore that contains pistons, springs, and tight seals into which the fluid pressure generated by the foot is carried away through the lines into the wheel cylinders, where it squeezes pads against rotors and forms the friction, which pulls thousands of pounds of moving steel to a controlled halt even on a downhill slope. Routine inspections detect Brake Master Cylinder leakage or sponginess prior to concerning distance increasing. Change a worn out Brake Master Cylinder when fluid turns black or travel increases.

Chrysler Brake Master Cylinder Parts and Q&A

Master Cylinder
68048551AC
Q: How to install a Brake Master Cylinder on Chrysler 300?
A:
Before installing the brake master cylinder, be sure to completely bleed the master cylinder. It is necessary to change the vacuum seal on the master cylinder. Fit the new vacuum seal at the rear of the master cylinder so that it squares up in the groove. Put the master cylinder onto the studs provided by the booster, passing the booster push rod through the master cylinder's piston. Put the two master cylinder mounting nuts in place and tighten them to 15 Nm. Feed the brake tubes through the master cylinder ports and tighten the tube nuts with 20 Nm of torque. Snap the brake fluid level sensor wiring connector onto the metal plate inside the brake fluid reservoir. Reattach the battery negative cable to its post on the battery after you are done checking. Add only clean and freshly purchased Mopar(R) Brake Fluid into the master cylinder reservoir. Put the access panel on the cowl side. Try to have a firm brake pedal before operating your car; if you do not have a proper pedal, drain the entire system and check for breaks in any hoses. At the end, take the car out and check that the brakes are working properly.
Master Cylinder
68549312AA
Q: How to Bleed a Brake Master Cylinder Before Installation on Chrysler Crossfire?
A:
Place bleed tubes and a wood dowel on your new brake master cylinder; stroke the pistons gently so that any air inside the line gets released. Start by fastening the brake master cylinder into a vise with brass grips. After that, join the bleed tubes to the outlet valves on the cylinder, each tube fitted into the bottom of the reservoir. Pour in new brake fluid after that; next, press the pistons inward using the wood dowel. When the pulsing stops, release the pistons and watch them return by spring pressure until there are no more air bubbles in the fluid.