How to remove and reinstall rocker arm and Lash Adjuster in four cylinder engine on Chrysler Cirrus?

To remove the rocker arm assemblies from a 2.0L engine, position the number one piston at Top Dead Center, disconnect the negative battery cable from the ground stud on the left shock tower, and remove the valve cover. Before removing the rocker arm shafts, mark the front shaft as the intake rocker arm shaft and the rear shaft as the exhaust. Loosen the rocker arm shaft bolts gradually until the valve spring pressure is relieved, then completely loosen the bolts without removing them to keep the assembly intact. Lift the rocker arms and shaft assemblies from the cylinder head, securing any dislodged hydraulic valve lash adjusters with electrical tape if necessary. Disassemble the rocker arm shaft components, marking all parts for reassembly in their original locations. For a 2.4L engine, remove both camshafts, then lift off the rocker arms and hydraulic valve lash adjusters, ensuring each is returned to its original location. Inspect the rocker arms and lash adjusters for wear or damage, replacing any that show signs of excessive wear. Before installation, ensure the lash adjusters are partially filled with engine oil, and if necessary, pump the plunger to eliminate excessive travel. Reinstall the rocker arms in their original locations, ensuring plastic spacers are correctly positioned, and install the rocker arm assemblies with the notches facing up. Tighten the rocker arm bolts in sequence to the specified torque, then follow the reverse steps for installation. After starting the engine, expect initial "tapping" noises from the adjusters; if they do not become silent after a warm-up and speed increase, replace the defective assembly. For the 2.4L engine, follow similar procedures for installation and testing of the lash adjusters and rocker arms.

OEM Chrysler Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Rocker Arms found

View related parts
Chrysler Rocker Arms Part Number: 4781183AA
$90.41 MSRP: $134.00
You Save: $43.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Rocker Arm Intake
Fits the following Chrysler Models:
- Pacifica | 2005-2008 | Base, LX | 6 Cyl 3.8 L GAS
- Town & Country | 2001-2010 | Base, EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Rocker Arms Part Number: 4781182AA
$110.86 MSRP: $165.00
You Save: $54.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
Fits the following Chrysler Models:
- Pacifica | 2005-2008 | Base, LX | 6 Cyl 3.8 L GAS
- Town & Country | 2001-2010 | Base, EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Rocker Arms Part Number: 68088240AA
$44.23 MSRP: $65.00
You Save: $20.77 (32%)
ADD TO CART
Product Specifications
- Other Name: Follower - Roller Finger; Rocker Arm; Follower Roller Finger
- Replaces: 68120381AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 4 Cyl 2.4 L GAS
View related parts
Chrysler Rocker Arms Part Number: MD178782
$21.00 MSRP: $42.45
You Save: $21.45 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Exhaust Rocker Arms; Arm, Exhaust Valve Rocker; Rocker Arm Exhaust
Fits the following Chrysler Models:
- Cirrus | 1995-2000 | LX, LXi | 6 Cyl 2.5 L GAS
- Sebring | 1995-2005 | Base, JX, JXi, LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Rocker Arms Part Number: MD167981
$14.57 MSRP: $26.80
You Save: $12.23 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Intake Rocker Arm; Arm, Inlet Valve Rocker (Front Valve); Rocker Arm Intake
Fits the following Chrysler Models:
- Cirrus | 1995-2000 | LX, LXi | 6 Cyl 2.5 L GAS
- Sebring | 1995-2005 | Base, JX, JXi, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Rocker Arms Part Number: 5048711AA
$14.25 MSRP: $21.00
You Save: $6.75 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve Exhaust; Rocker Arm Valve Intake
- Replaces: 5047228AB, 5047228AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Rocker Arms Part Number: 68272236AA
$23.03 MSRP: $34.10
You Save: $11.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve
Fits the following Chrysler Models:
- Pacifica | 2017-2024 | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Rocker Arms Part Number: 4448994
$3.39 MSRP: $4.30
You Save: $0.91 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rocker Valve Right; Rocker Arm; Rocker, Valve Right (1988); Rocker, Valve, Right; Rocker, Valve Right; Rocker, Valve
Fits the following Chrysler Models:
- Fifth Avenue | 1984-1989 | Base | 8 Cyl 5.2 L GAS
View related parts
Chrysler Intake Rocker Arm Part Number: 5098180AA
$169.64 MSRP: $215.04
You Save: $45.40 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Rocker Arm Intake
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited | 6 Cyl 3.2 L GAS
View related parts
Chrysler Exhaust Rocker Arms Part Number: 4648702AC
$58.98 MSRP: $91.55
You Save: $32.57 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm Exhaust
- Replaces: 4648702AB
Fits the following Chrysler Models:
- Cirrus | 2000 | LX | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Chrysler Exhaust Rocker Arms Part Number: 5159712AA
$78.30 MSRP: $99.25
You Save: $20.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Rocker; Rocker Arm
Fits the following Chrysler Models:
- Crossfire | 2005-2006 | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Intake Rocker Arm Part Number: 5159711AA
$78.30 MSRP: $99.25
You Save: $20.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Rocker; Rocker Arm
Fits the following Chrysler Models:
- Crossfire | 2005-2006 | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Rocker Arms Part Number: MD072116
Product Specifications
- Other Name: Arm - Assembly Rocker A; Arm, Intake Rocker (1985); Arm, Intake Rocker (A); Arm, Intake Rocker
Fits the following Chrysler Models:
- Conquest | 1987-1989 | Base, TSi | 4 Cyl 2.6 L GAS
View related parts
Chrysler Rocker Arms Part Number: 4884042AA
Product Specifications
- Other Name: Arm - Valve; Rocker Arm Valve Roller; Rocker Arm Valve
Fits the following Chrysler Models:
- Cirrus | 1999-2000, 1995-1997 | LX, LXi | 4 Cyl 2.4 L GAS
- PT Cruiser | 2001-2010 | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
- Sebring | 2001-2006, 1995-1999 | Base, JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Voyager | 2000-2003 | Base, Ec, LX | 4 Cyl 2.4 L GAS
View More
View related parts
Chrysler Intake Rocker Arm Part Number: 4648701AB
Product Specifications
- Other Name: Arm - Intake; Rocker Arm Intake
Fits the following Chrysler Models:
- Cirrus | 2000 | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Intake Rocker Arm Part Number: 5098181AA
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Rocker Arm Intake
Fits the following Chrysler Models:
- Crossfire | 2004-2007 | Base, Limited | 6 Cyl 3.2 L GAS
View related parts
Chrysler Exhaust Rocker Arms Part Number: 4573462
Product Specifications
- Other Name: Arm - Exhaust; Arm Assembly, Right Exhaust Rocker; Rocker Arm Exhaust
Fits the following Chrysler Models:
- Concorde | 1996-1997 | LX, LXi | 6 Cyl 3.5 L GAS
- LHS | 1996-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1996 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Intake Rocker Arm Part Number: 5159710AA
Product Specifications
- Other Name: Arm - Rocker; Rocker Arm
Fits the following Chrysler Models:
- Crossfire | 2005-2006 | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Exhaust Rocker Arms Part Number: 4573461
Product Specifications
- Other Name: Arm - Exhaust Valve (Left); Arm Assembly, Left Exhaust Rocker; Rocker Arm Exhaust
Fits the following Chrysler Models:
- Concorde | 1996-1997 | LX, LXi | 6 Cyl 3.5 L GAS
- LHS | 1996-1997 | Base | 6 Cyl 3.5 L GAS
- New Yorker | 1996 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Exhaust Rocker Arms Part Number: 5098438AA
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited | 6 Cyl 3.2 L GAS

| Page 1 of 2 |Next >

1-20 of 33 Results

Chrysler Rocker Arm

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Rocker Arm for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Rocker Arm transforms the movement of the camshaft to accurate valve lift that maintains engines to be responsive and smooth. Since 1925, Chrysler has been driving cars forward with strong constructions, Floating Power mounts that curb vibration, big Airflow bodies that reduce drag and cool cabins, and the first practical minivan that allows families to pile in without crowding and keeps wallets relaxed with a simple price strategy that makes choices easy. Chrysler continues making space rides more comfortable and everyday practical, and the drivers and their passengers can step in and stretch their legs while the truck continues to roll without any disturbance, and the cargo of groceries, camping gear, or band equipment will be packed into the truck without any uncomfortable piling up or seat rearrangements. Chrysler Rocker Arm is made of hard stamped steel or light aluminum body to flex on its fulcrum to provide an alignment that the pushrod turns easily into valve lift without sideways motion. Chrysler Rocker Arm usually has roller tip needle bearings that cut friction in order to allow the camshaft to rotate higher and the valves to follow its profile without scuffing. Rocker Arms that have 1.5-1.8 ratios push the valve open further, allowing more air and fuel into the engine, which gives the throttle a boost in the entire rev range and keeps the throttle response quick. Rocker Arm contact surfaces are hardened and polished to endure high spring pressure at redline to ensure that daily commutes are not rough and weekend blasts do not fail regardless of how hard the engine is pulling.

Chrysler Rocker Arm Parts and Q&A

Rocker Arms
MD167981
Q: How to remove and reinstall rocker arm and Lash Adjuster in four cylinder engine on Chrysler Cirrus?
A:
To remove the rocker arm assemblies from a 2.0L engine, position the number one piston at Top Dead Center, disconnect the negative battery cable from the ground stud on the left shock tower, and remove the valve cover. Before removing the rocker arm shafts, mark the front shaft as the intake rocker arm shaft and the rear shaft as the exhaust. Loosen the rocker arm shaft bolts gradually until the valve spring pressure is relieved, then completely loosen the bolts without removing them to keep the assembly intact. Lift the rocker arms and shaft assemblies from the cylinder head, securing any dislodged hydraulic valve lash adjusters with electrical tape if necessary. Disassemble the rocker arm shaft components, marking all parts for reassembly in their original locations. For a 2.4L engine, remove both camshafts, then lift off the rocker arms and hydraulic valve lash adjusters, ensuring each is returned to its original location. Inspect the rocker arms and lash adjusters for wear or damage, replacing any that show signs of excessive wear. Before installation, ensure the lash adjusters are partially filled with engine oil, and if necessary, pump the plunger to eliminate excessive travel. Reinstall the rocker arms in their original locations, ensuring plastic spacers are correctly positioned, and install the rocker arm assemblies with the notches facing up. Tighten the rocker arm bolts in sequence to the specified torque, then follow the reverse steps for installation. After starting the engine, expect initial "tapping" noises from the adjusters; if they do not become silent after a warm-up and speed increase, replace the defective assembly. For the 2.4L engine, follow similar procedures for installation and testing of the lash adjusters and rocker arms.