How to Service and Repair a Sway Bar Kit on a Rear-Wheel-Drive on Chrysler 300?

To perform sway bar kit service or repair on a rear-wheel-drive car, you must first support it with the vehicle up and off the ground. After that, remove the belly pan. Remove the screws from both sides of the vehicle securing the sway bar kit heat shield and then take off the heat shield. Once that is done, get rid of the bolts that hold the isolator retainer on the sway bar kit of the vehicle. Now, take the two retainer halves off the ends around the sway bar kit isolator. Use the gap to take out every isolator from the sway bar kit. On one side of the car, undo the sway bar nut that holds the link to the bar, gently slide the link ball joint stem off the bar from the other side and then remove the bar from the vehicle too.

How to Install a Sway Bar Kit for the Front Stabilizer on Chrysler Crossfire?

First, slide the coolant system upper bolt (2), right and left sway bar bushings (3 and 5) and the sway bar kit (6) together. You may need to lift the lower control arms (2) to make sure the sway bushing (2) sits correctly against its partner part. Then, put the sway bar kit (6) in place, loosely attaching the bolts and nuts to brackets 1 and 4 so that the arrows and the word "TOP" are correctly visible on the sway bar kit. Place the sway bar kit (6) in the center of the vehicle and tightly wind the bolts (4) in the inner retainer brackets to 20 Nm (15 ft. lbs.). After that, tighten up both the right and left sway bar bracket nuts to the lower control arm (2) until they reach the required tightness. After this, lower your vehicle and perform a vehicle alignment check.

OEM Chrysler Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

85 Sway Bar Kits found

View related parts
Chrysler Stabilizer Bar, Rear Part Number: 52855389AA
$77.11 MSRP: $97.75
You Save: $20.64 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
Fits the following Chrysler Models:
- Aspen | 2007-2009 | Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 4721084AE
$199.41 MSRP: $296.00
You Save: $96.59 (33%)
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar Bushing, Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4721084AB, 4721084AC, 4721084AD
Fits the following Chrysler Models:
- Town & Country | 2009-2012 | LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 4743027AA
$116.36 MSRP: $147.51
You Save: $31.15 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front Sway; Suspension Stabilizer Bar, Front; Sway Bar; Bar Front Sway
- Position: Front
Fits the following Chrysler Models:
- Town & Country | 2001-2007 | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2003 | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68184223AB
$233.40 MSRP: $347.00
You Save: $113.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68184223AA
Fits the following Chrysler Models:
- 300 | 2016-2023 | C, C Platinum, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68379797AA
$256.06 MSRP: $379.00
You Save: $122.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 4877679AC, 4877679AA, 68144056AD, 4877679AD, 68144056AC, 4877679AB, 4877679AE
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 52855386AA
$59.18 MSRP: $67.90
You Save: $8.72 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
Fits the following Chrysler Models:
- Aspen | 2007-2009 | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68080525AA
$192.59 MSRP: $269.00
You Save: $76.41 (29%)
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Stabilizer Bar, Front Part Number: 4772633AB
$20.26 MSRP: $117.00
You Save: $96.74 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front Sway; Suspension Stabilizer Bar, Front; Sway Bar; Bar Front Sway
- Position: Front
Fits the following Chrysler Models:
- 300M | 2000-2001 | Base | 6 Cyl 3.5 L GAS
- Concorde | 2000 | LX, LXi | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS
- LHS | 2000 | Base | 6 Cyl 3.5 L GAS
View More
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 5180016AA
$114.38 MSRP: $169.00
You Save: $54.62 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension; Bar Rear Sway
- Position: Rear
Fits the following Chrysler Models:
- 300 | 2011-2013 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core, Touring | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68379798AB
$288.92 MSRP: $430.00
You Save: $141.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 5168609AB, 68161270AA, 68161270AB, 68161270AC, 68161270AE, 68161270AD, 68161270AF, 5168609AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68238126AC
$214.14 MSRP: $319.00
You Save: $104.86 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68238126AB
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 68046012AA
$79.57 MSRP: $168.00
You Save: $88.43 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
Fits the following Chrysler Models:
- 300 | 2008-2013 | Base, C, C Luxury, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Bar - Rear Suspension Part Number: 68319497AC
$150.53 MSRP: $229.00
You Save: $78.47 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR-REAR SUSPENSION
- Position: Rear
- Replaces: 68319497AA, 68319497AB
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68230234AD
$179.01 MSRP: $264.00
You Save: $84.99 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Replaces: 68230234AB, 68230234AC
Fits the following Chrysler Models:
- Pacifica | 2017-2020 | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Stabilizer Bar, Front Part Number: 68319333AC
$364.11 MSRP: $536.00
You Save: $171.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 68319333AB
Fits the following Chrysler Models:
- Pacifica | 2021-2025 | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2021-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 4782871AB
$60.84 MSRP: $89.50
You Save: $28.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
Fits the following Chrysler Models:
- 300 | 2005-2009 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 5104992AA
$33.47 MSRP: $42.43
You Save: $8.96 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
Fits the following Chrysler Models:
- Crossfire | 2005-2008 | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 4877698AB
$213.03 MSRP: $304.00
You Save: $90.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Replaces: 4877698AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, S | 6 Cyl 3.6 L FLEX
View related parts
Chrysler Stabilizer Bar, Front Part Number: 4782950AC
$135.96 MSRP: $155.00
You Save: $19.04 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Front; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
Fits the following Chrysler Models:
- 300 | 2011-2015 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Stabilizer Bar, Rear Part Number: 4879266AA
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
Fits the following Chrysler Models:
- Sebring | 2002-2006 | Base, GTC, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS

| Page 1 of 5 |Next >

1-20 of 85 Results

Chrysler Sway Bar Kit

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Sway Bar Kit for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

The Chrysler Sway Bar Kit controls body roll, allowing the average driver to corner without experiencing stress. Chrysler caused an early tremble in the industry with Floating Power, which reduced engine vibration and enhanced ride calm, a technological invention that made long highway hours less exhausting. Chrysler was next with radical Airflow styling, which reduced drag and allowed cabin room to be applied on relaxed journeys, and aerodynamics could be important among ordinary automobile drivers at any time of the year. The viable minivan was later invented by Chrysler, showing that roomy interiors and easy access do not have to be expensive, and that this is a formula that competitors continue to follow to this day, even on long-distance trips. Chrysler continues to perfect ride quality and utility to make families and commuters feel intelligent as they select the badge enjoying honest pricing without any flashy promises at the expense of bold style within or without. The Sway Bar Kit connects the left and right suspension arms in a torsion spring, which stiffens cornering lean but spares vertical softness. The Sway Bar Kit versions have become adjustable so that drivers can set up the stiffness for school runs or back road spirits and change settings within minutes with no hassle. There is no wobble, but the Sway Bar Kit does not feel brutal and therefore, the steering is not floppy even when there is a pothole between the corner. The technology of the Sway Bar Kit now becomes operational to adjust resistance dynamically in order to have a safer fun day or night during all seasons.

Chrysler Sway Bar Kit Parts and Q&A

Stabilizer Bar, Rear
4782873AB
Q: How to Service and Repair a Sway Bar Kit on a Rear-Wheel-Drive on Chrysler 300?
A:
To perform sway bar kit service or repair on a rear-wheel-drive car, you must first support it with the vehicle up and off the ground. After that, remove the belly pan. Remove the screws from both sides of the vehicle securing the sway bar kit heat shield and then take off the heat shield. Once that is done, get rid of the bolts that hold the isolator retainer on the sway bar kit of the vehicle. Now, take the two retainer halves off the ends around the sway bar kit isolator. Use the gap to take out every isolator from the sway bar kit. On one side of the car, undo the sway bar nut that holds the link to the bar, gently slide the link ball joint stem off the bar from the other side and then remove the bar from the vehicle too.
Stabilizer Bar, Rear
5104992AA
Q: How to Install a Sway Bar Kit for the Front Stabilizer on Chrysler Crossfire?
A:
First, slide the coolant system upper bolt (2), right and left sway bar bushings (3 and 5) and the sway bar kit (6) together. You may need to lift the lower control arms (2) to make sure the sway bushing (2) sits correctly against its partner part. Then, put the sway bar kit (6) in place, loosely attaching the bolts and nuts to brackets 1 and 4 so that the arrows and the word "TOP" are correctly visible on the sway bar kit. Place the sway bar kit (6) in the center of the vehicle and tightly wind the bolts (4) in the inner retainer brackets to 20 Nm (15 ft. lbs.). After that, tighten up both the right and left sway bar bracket nuts to the lower control arm (2) until they reach the required tightness. After this, lower your vehicle and perform a vehicle alignment check.