How to Service and Repair the Clutch Slave Cylinder on Dodge Neon?

You should lift the T350 vehicle by its underside before moving to servicing and repairing the clutch slave cylinder. Extract the cotter key from where it connects the hydraulic tube to the slave cylinder, then use a fitting punch to remove and get rid of the roll pin. After that, unscrew the bolts holding the slave cylinder and separate the slave cylinder from the transaxle, allowing any brake fluid to drain away. For installation, place the slave cylinder assembly on the transaxle and screw the slave cylinder-to-transaxle bolts to 19 Nm (168 inch lbs.). Secure the end of the clutch hydraulic supply hose to the slave cylinder and add a fresh roll pin with its key. Remove the vehicle from its stand and top off the reservoir with DOT 3 brake fluid if it is not full yet. Then, remove the excess fluid from the clutch hydraulic system and test the performance of the clutch release system.

How to Install a Clutch Slave Cylinder on Dodge Nitro?

Place the slave cylinder (2) into the transmission shaft before you start working. After that, set the slave cylinder nuts (3) in place and tighten them to the required value: 23 Nm (17 ft. lbs.). Put the end of the hydraulic line into the slave cylinder socket and make sure an O-ring is on the hydraulic line. Lastly, bleed the full hydraulic system.

OEM Dodge Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Clutch Slave Cylinders found

View related parts
Dodge Slave Cylinder Part Number: 5273431AB
$123.50 MSRP: $182.00
You Save: $58.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Hydraulic Clutch; Release Bearing; Actuator Hydraulic Clutch Slave Cylinder; Actuator Hydraulic Clutch; Cylinder Clutch Slave
- Replaces: 5273431AA
Fits the following Dodge Models:
- Avenger | 2007
- Caliber | 2011-2012, 2007-2008 | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Journey | 2009
View More
View related parts
Dodge Slave Cylinder Part Number: 5038636AA
$410.15 MSRP: $495.00
You Save: $84.85 (18%)
ADD TO CART
Product Specifications
- Other Name: Cyclinder - Clutch Slave; Clutch Slave Cylinder; Cylinder Clutch Slave
Fits the following Dodge Models:
- Viper | 2015-2017 | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Slave Cylinder Part Number: 5038118AB
$302.77 MSRP: $462.00
You Save: $159.23 (35%)
ADD TO CART
Product Specifications
- Other Name: Actuator - Clutch Concentric Slave; Clutch Slave Cylinder; Cltch Slave Cylinder; Actuator Assembly Clutch Concentric Slave
Fits the following Dodge Models:
- Challenger | 2009-2023 | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Slave Cylinder Part Number: 5037357AC
$347.83 MSRP: $410.00
You Save: $62.17 (16%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Slave
Fits the following Dodge Models:
- Viper | 2008-2010, 1992-2006 | ACR, Base, GT2, GTS, R/T-10, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Slave Cylinder Part Number: 52060133AE
$122.34 MSRP: $171.00
You Save: $48.66 (29%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Slave
- Replaces: 52060133AD, 52060133AC, 52060133AB
Fits the following Dodge Models:
- Nitro | 2007-2009 | R/T, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Slave Cylinder Part Number: 5037339AB
Product Specifications
- Other Name: Actuator - Clutch Slave; Clutch Slave Cylinder
Fits the following Dodge Models:
- Neon | 2003-2005 | SRT-4 | 4 Cyl 2.4 L GAS
View related parts
Dodge Slave Cylinder Part Number: MD770482
Product Specifications
- Other Name: Cylinder - Clutch Slave
Fits the following Dodge Models:
- Stealth | 1991-1996 | Base, ES, R/T, R/T Turbo | 6 Cyl 3.0 L GAS
View related parts
Dodge Slave Cylinder Part Number: MD749823
Product Specifications
- Other Name: Cylinder Clutch Slave; Clutch Slave Cylinder
Fits the following Dodge Models:
- Avenger | 1995-1996 | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Slave Cylinder Part Number: MD749822
Product Specifications
- Other Name: Cylinder Clutch Slave
Fits the following Dodge Models:
- Colt | 1993-1994 | Base, ES, GL | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L GAS
View related parts
Dodge Slave Cylinder Part Number: 68033396AA
Product Specifications
- Other Name: Actuator - Clutch; Clutch Slave Cylinder
- Replaces: 5037863AB
Fits the following Dodge Models:
- Caliber | 2008-2010 | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Slave Cylinder Part Number: 4668331AB
Product Specifications
- Other Name: Cylinder - Hydraulic Clutch; Clutch Slave Cylinder; Cltch Slave Cylinder; Cylinder Clutch Slave
Fits the following Dodge Models:
- Neon | 2001-2002 | ACR, Base, ES, R/T, SE | 4 Cyl 2.0 L GAS
View related parts
Dodge Slave Cylinder Repair Kit Part Number: MD977130
Product Specifications
- Other Name: Cylinder Package - Clutch Release; Clutch Slave Cylinder; Cylinder Clutch Release
Fits the following Dodge Models:
- Avenger | 1995-1999 | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Stratus | 2002-2005 | R/T | 6 Cyl 3.0 L GAS
View related parts
Dodge Slave Cylinder Part Number: MD748617
Product Specifications
- Other Name: Cylinder - Clutch Release; Clutch Slave Cylinder; Cylinder Clutch Release
Fits the following Dodge Models:
- Stratus | 2002-2005 | R/T | 6 Cyl 3.0 L GAS
View related parts
Dodge Slave Cylinder Part Number: MD722656
Product Specifications
- Other Name: Cylinder Clutch Release; Cylinder Assembly, Clutch Release, 5 Speed Transmission; Q, K Engine options available.
Fits the following Dodge Models:
- Colt | 1989-1992 | Base, DL, E, GL, GT, Vista | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Dodge Slave Cylinder Part Number: 4670065
Product Specifications
- Other Name: Cylinder - Clutch Slave; Clutch Slave Cylinder; Cltch Slave Cylinder; Slave Cylinder Assembly, Clutch Release; Cylinder Clutch Slave
Fits the following Dodge Models:
- Avenger | 1997-1999 | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Slave Cylinder Part Number: 4668331AC
Product Specifications
- Other Name: Cylinder - Clutch Slave; Clutch Slave Cylinder; Cltch Slave Cylinder; Cylinder Clutch Slave
Fits the following Dodge Models:
- Neon | 2003-2005 | R/T, SE, SXT | 4 Cyl 2.0 L GAS

Dodge Clutch Slave Cylinder

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Clutch Slave Cylinder for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Clutch Slave Cylinder provides sharp pedal response by turning hydrostatic force into lightning-fast clutch release. In 1914, Dodge created its identity when it introduced the first all-steel body and it shouted grit and development. Dodge continued that thrust as they dropped HEMI muscle and Viper thunder on the streets eager to feed on raw performance. Dodge now even pipes electric roar through the Fratzonic Chambered Exhaust and lets battery power sound like drag-strip fury. Dodge provides the drive modes including Drag, Donut, Sport, and whisper-quiet Stealth, which is enough to demonstrate that the badge respects all moods behind the steering wheel. The brand is all about straight-line punch and bold design and an obdurate aversion to creating dull vehicles. Its history is such a challenge to competitors that it never stops raising displacement, noise, and attitude. Clutch Slave Cylinder is mounted on the transmission bell housing and converts the input of the pedal into linear force, which releases the pressure plate. Profitable Clutch Slave Cylinder keeps gear shifts clean, decreases grind, and prevents synchro damage. Clutch Slave Cylinder manages all downshift surges and launch slips, so hard seals and castings are important. A worn-out Clutch Slave Cylinder that leaks or has an adhesive nature causes the pedal to sink, shift timing is distorted, and the car becomes difficult to drive. Speedy replacement does not lose clutch feel.

Dodge Clutch Slave Cylinder Parts and Q&A

Slave Cylinder
5037339AB
Q: How to Service and Repair the Clutch Slave Cylinder on Dodge Neon?
A:
You should lift the T350 vehicle by its underside before moving to servicing and repairing the clutch slave cylinder. Extract the cotter key from where it connects the hydraulic tube to the slave cylinder, then use a fitting punch to remove and get rid of the roll pin. After that, unscrew the bolts holding the slave cylinder and separate the slave cylinder from the transaxle, allowing any brake fluid to drain away. For installation, place the slave cylinder assembly on the transaxle and screw the slave cylinder-to-transaxle bolts to 19 Nm (168 inch lbs.). Secure the end of the clutch hydraulic supply hose to the slave cylinder and add a fresh roll pin with its key. Remove the vehicle from its stand and top off the reservoir with DOT 3 brake fluid if it is not full yet. Then, remove the excess fluid from the clutch hydraulic system and test the performance of the clutch release system.
Slave Cylinder
52060133AE
Q: How to Install a Clutch Slave Cylinder on Dodge Nitro?
A:
Place the slave cylinder (2) into the transmission shaft before you start working. After that, set the slave cylinder nuts (3) in place and tighten them to the required value: 23 Nm (17 ft. lbs.). Put the end of the hydraulic line into the slave cylinder socket and make sure an O-ring is on the hydraulic line. Lastly, bleed the full hydraulic system.