How to Maintain the Hood Cable for Optimal Performance on Dodge Viper?

To work on the hood cable, open the hood after releasing the hook that holds it closed. Another method is to remove the cable casing end from the U-slot attached to the hood latch and afterwards break the hood cable from the top slot in the hood release lever. If you go with a new cable, reattempt this process for the hood latch that still works. Loosen the four screws that join the hood release handle to the back of the bumper reinforcement under the radiator opening of the fascia. To help with installation, put a 112 cm (48 in.) section of monofilament line on the latch ends of the cables and attach the other end to the hood hinge. Detach the cables from beside the front grille. Position the cables behind the front grille and then put the screws holding the hood release through the reinforcement bar into the bumper at the front air inlet. Place the end of the hood cable into the long opening at the latch release lever, then do the same on the other side for a replacement. Using both hands, press the cable-transaction unit down into the front hood latch slot and re-engage the other hood latch if you're replacing the cables.

How to Maintain and Fix the Hood Cable on Dodge Ram 1500?

Start by removing the hood latch before you take care of the hood cable. After that, open the engine compartment door on the left side and remove the battery tray. After that, pull off the three attachment points for the hood cable from the upper radiator crossmember and left fender rail. Inside your car, take out the two screws that attach the hood handle to the bracket on the instrument panel. In the end, take off the grommet from the cowl panel and pull the hood cable and its handle out.

OEM Dodge Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Hood Cables found

View related parts
Dodge Release Cable Part Number: 4580531
$89.11 MSRP: $133.00
You Save: $43.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Latch; Cable And Handle Assembly, Release; Release Hood Latch
Fits the following Dodge Models:
- Intrepid | 1993-1997 | Base, ES | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Release Cable, Front Part Number: 4389822AF
$79.65 MSRP: $119.00
You Save: $39.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
- Replaces: 4389822AD, 4389822AC, 4389822AB, 4389822AE
Fits the following Dodge Models:
- Avenger | 2007-2014 | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Release Cable, Front Part Number: 5104405AA
$16.82 MSRP: $24.85
You Save: $8.03 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Release; Hood Release Cable, Front; Cable Hood Release; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Sprinter 2500 | 2003-2006 | Base | 5 Cyl 2.7 L DIESEL
- Sprinter 3500 | 2003-2006 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Release Cable Part Number: 4658909
$37.46 MSRP: $47.49
You Save: $10.03 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Hood Latch; Hood Release Cable; Release Assembly, Inside Hood Latch; Release Hood Latch
Fits the following Dodge Models:
- Neon | 1995-1999 | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Release Cable, Front Part Number: 68156854AC
$92.79 MSRP: $113.00
You Save: $20.21 (18%)
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
- Replaces: 68156854AB, 68156854AA
Fits the following Dodge Models:
- Viper | 2013-2017 | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Release Cable, Front Part Number: 5160352AG
$91.47 MSRP: $138.00
You Save: $46.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch Handle And Cable Assembly; Release Hood Latch; Hood Release Cable
- Position: Front
- Replaces: 5160352AB, 5160352AE, 5160352AD, 5160352AF, 5160352AC
Fits the following Dodge Models:
- Ram 1500 | 2009-2010 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
- Ram 2500 | 2010 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
- Ram 3500 | 2010 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View More
View related parts
Dodge Release Cable, Front Part Number: 4717517AD
$53.50 MSRP: $109.00
You Save: $55.50 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Hood Latch; Hood Release Cable, Front; Hood Release Cable
- Position: Front
- Replaces: 4717517AC
Fits the following Dodge Models:
- Caravan | 2001-2007 | Base, C/V, Ec, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Grand Caravan | 2001-2007 | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Release Cable, Front Part Number: 5109272AC
$64.06 MSRP: $95.75
You Save: $31.69 (34%)
ADD TO CART
Product Specifications
- Other Name: Release - Hood Latch; Hood Release Cable, Front; Hood Release Cable
- Position: Front
- Replaces: 5109272AB, 5109272AA
Fits the following Dodge Models:
- Grand Caravan | 2008-2010 | C/V, SE, SXT | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Release Cable, Front Part Number: 68082455AD
$57.84 MSRP: $85.20
You Save: $27.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
- Replaces: 68082455AC, 68082455AA, 68082455AB
Fits the following Dodge Models:
- Dart | 2012-2016 | Aero, GT, Limited, R/T, Rallye, SE, SXT, SXT Sport | 1.4L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Release Cable, Front Part Number: 4783583
$44.07 MSRP: $55.86
You Save: $11.79 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Neon | 2000 | ES, High Line | 4 Cyl 2.0 L GAS
View related parts
Dodge Release Cable, Front Part Number: 4865815AA
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Viper | 2008-2010, 2003-2006 | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Release Cable, Front Part Number: 55113202AA
Product Specifications
- Other Name: Cable - Hood Release; Hood Release Cable, Front; Cable Hood Release; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Nitro | 2007-2011 | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Release Cable Part Number: 4534670
Product Specifications
- Other Name: Release - Assembly - Inside Hood Latch Release; Hood Release Cable; Release Assembly, Inside Hood Latch; Handle, Hood Latch Release W/Cable; Handle, Hood Release Latch
Fits the following Dodge Models:
- Daytona | 1988-1989 | Base, ES, ES Turbo, Pacifica, Shelby, Shelby Z | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Shadow | 1989-1994 | America, Base, ES, High Line, Shelby | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Spirit | 1989-1995 | Base, ES, High Line, LE, R/T | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Dodge Release Cable Part Number: 4673097
Product Specifications
- Other Name: Release Assembly - Inside Hood Latch; Hood Release Cable; Release Assembly, Inside Hood Latch
Fits the following Dodge Models:
- Caravan | 1991-1995 | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Grand Caravan | 1991-1995 | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Release Cable Part Number: 55026854
Product Specifications
- Other Name: Release - Assembly - Instrument Panel Hood Latch; Hood Release Cable; Handle, Hood Release
Fits the following Dodge Models:
- Dakota | 1987-1993 | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Release Cable, Front Part Number: 68009853AA
Product Specifications
- Other Name: Cable - Hood Release; Hood Release Cable, Front; Cable Hood Release; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Sprinter 2500 | 2007-2009 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- Sprinter 3500 | 2007-2009 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Release Cable, Front Part Number: 4580280AC
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Intrepid | 1998-2004 | Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Release Cable Part Number: 4709049AB
Product Specifications
- Other Name: Cable - Hood Release; Hood Release Cable; Handle And Cable Hood Release
Fits the following Dodge Models:
- Viper | 1993-2002 | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Hood - Hood Release Part Number: 68591404AC
$13.86 MSRP: $20.00
You Save: $6.14 (31%)
Product Specifications
- Other Name: HOOD-HOOD RELEASE
Fits the following Dodge Models:
- Charger Daytona | 2024-2025 | R/T, Scat Pack | BATTERY EV (EV/BEV)
View related parts
Dodge Release Cable, Front Part Number: MR271734
Product Specifications
- Other Name: Cable - Hood Lock Release; Hood Release Cable, Front; Cable Hood Lock Release; Hood Release Cable
- Position: Front
Fits the following Dodge Models:
- Stratus | 2001-2005 | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 33 Results

Dodge Hood Cable

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Hood Cable for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Hood Cable allows you to open the hood in a flash, so it is not a problem to make engine checks quick and easy. Dodge has been wrapping crude strength in all-steel shells since 1914, then stacking on HEMI muscle, Viper attitude, and a Fratzonic snarl that reaches 126 decibels and drops to stealth when you need it, and the muscle, street pulls every day, and choice are equally valued. In each decade, Dodge was punching the pavement with huge displacement and less inhibited styling, and commute to work took the incoming launch pads with unapologetic swagger. Dodge takes the right pedal as a promise and supports it with the toughness of the drive line that dismisses abuse. Dodge has the advantage of owners having confidence in the company when it comes to making better parts that do matter, such as exhaust notes to simple cables. A Hood Cable uses a low-friction sleeve, where a steel inner wire is passed through, and a cabin latch is connected to the front lock in such a way that a single confident pull releases the catch; one will not have to bang on the fists with tools. Since all the starting, stopping, and potholes bend the assembly, a Hood Cable should have strands that are not corroding and have a snug grommet to retain the road salt and wash water. Should weariness at length wear the strands, the replacement of a new Hood Cable will give that clean handle back to the rod and protect the radiator and belts with a panel squarely screwed into place. Frequent check on the sticky travel or the extended play will keep a Hood Cable ahead of a failure and the time and tapped paint with the desperate screwdriver pries can be saved.

Dodge Hood Cable Parts and Q&A

Release Cable
4709049AB
Q: How to Maintain the Hood Cable for Optimal Performance on Dodge Viper?
A:
To work on the hood cable, open the hood after releasing the hook that holds it closed. Another method is to remove the cable casing end from the U-slot attached to the hood latch and afterwards break the hood cable from the top slot in the hood release lever. If you go with a new cable, reattempt this process for the hood latch that still works. Loosen the four screws that join the hood release handle to the back of the bumper reinforcement under the radiator opening of the fascia. To help with installation, put a 112 cm (48 in.) section of monofilament line on the latch ends of the cables and attach the other end to the hood hinge. Detach the cables from beside the front grille. Position the cables behind the front grille and then put the screws holding the hood release through the reinforcement bar into the bumper at the front air inlet. Place the end of the hood cable into the long opening at the latch release lever, then do the same on the other side for a replacement. Using both hands, press the cable-transaction unit down into the front hood latch slot and re-engage the other hood latch if you're replacing the cables.
Release Cable, Front
55364471AA
Q: How to Maintain and Fix the Hood Cable on Dodge Ram 1500?
A:
Start by removing the hood latch before you take care of the hood cable. After that, open the engine compartment door on the left side and remove the battery tray. After that, pull off the three attachment points for the hood cable from the upper radiator crossmember and left fender rail. Inside your car, take out the two screws that attach the hood handle to the bracket on the instrument panel. In the end, take off the grommet from the cowl panel and pull the hood cable and its handle out.