How to Remove the Starter Motor on 3.7L and 4.7L Engines on Dodge Ram 1500?

Disconnect and separate the negative battery cable before raising and supporting the car to get at the starter motor. If the car has 4WD and certain transmissions, remove the two bolts in the bracket at the transmission and use a pry to lift the bracket slightly so you can access the lower starter bolt. When working on a manual, remove one bolt and one nut and when working on an automatic, remove two bolts. Guide the starter motor forward to the front of the vehicle until the pinion housing is past the housing and is being supported from below the motor, not from the harness. Lower the battery cable eyelet to the solenoid battery terminal, hold the solenoid battery terminal stud with a wrench and unfasten the bolts that secure them. At the last step, take out the battery positive cable connector from the solenoid's terminal receptacle and detach the starter motor.

How to Install a Starter Motor for 3.7L, 4.7L, and 5.7L Engines on Dodge Ram 1500?

Reach the solenoid wire longer end to the starter motor securely onto it. Put the end of the battery cable onto the solenoid stud and then tighten the nut to 19 ft. lbs. (25 Nm) while stopping the starter motor from dangling from the harness. Mount the starter motor onto the transmission and when the vehicle has an automatic transmission, set the cooler tube bracket in place. For automated vehicles, screw in and tighten each bolt until it reaches 50 ft. lbs. (68 Nm) and for manual vehicles, tighten both the bolt and nut the same amount, then once you've lowered the vehicle, attach the negative battery cable. With the 5.7L engine, make sure to place the solenoid wire from the immobilizer onto the starter motor and confirm it's attached. Place the battery wire on to the solenoid stud and tighten the nut on it as required by the torque specs, again making certain that the starter doesn't hang from the wiring harness. Put the starter motor onto the engine and, if using an automatic transmission, slide the cooler tube bracket into place. Install the two bolts to achieve 30 ft. lbs. (41 Nm), then connect the negative battery cable and lower your vehicle.

OEM Dodge Ram 1500 Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Starter motors found

View related parts
Dodge Ram 1500 Starter Part Number: 4801256AC
$273.50 MSRP: $402.00
You Save: $128.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4801256AA, 4801256AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Ram 1500 | Laramie, SLT, ST, SXT, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56029274AA
$215.71 MSRP: $319.00
You Save: $103.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56044736AC
$285.96 MSRP: $419.00
You Save: $133.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Ram 1500 | Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 5037199AB
$390.54 MSRP: $592.00
You Save: $201.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: R6027702AC
$188.42 MSRP: $275.00
You Save: $86.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 56027702AB, 56027702AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 1500 | Laramie, SLT, ST, Sport, WS | 3.7L V6, 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56027702AB
$188.42 MSRP: $275.00
You Save: $86.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter Motor; Starter Engine
- Replaced by: R6027702AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Dodge Ram 1500 | Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56027702AD
$206.85 MSRP: $271.00
You Save: $64.15 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaces: 4801257AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56028715AD
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Dodge Ram 1500 | Laramie, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56027703AD
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Ram 1500
View related parts
Dodge Ram 1500 Starter Part Number: 56029113AA
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Ram 1500 | Laramie, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 56028733AA
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 1500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Starter Part Number: 53005984AB
Product Specifications
- Other Name: Starter - Engine
- Replaces: 53005984, R3005984
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Ram 1500 | Base | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 1500 Starter Motor

Choose OEM Starter Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Starter Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 1500 Starter Motor Parts and Q&A

Starter
4801256AC
Q: How to Remove the Starter Motor on 3.7L and 4.7L Engines on Dodge Ram 1500?
A:
Disconnect and separate the negative Battery Cable before raising and supporting the car to get at the starter motor. If the car has 4WD and certain transmissions, remove the two bolts in the bracket at the transmission and use a pry to lift the bracket slightly so you can access the lower starter bolt. When working on a manual, remove one bolt and one nut and when working on an automatic, remove two bolts. Guide the starter motor forward to the front of the vehicle until the pinion housing is past the housing and is being supported from below the motor, not from the harness. Lower the battery cable eyelet to the solenoid battery terminal, hold the solenoid battery terminal stud with a wrench and unfasten the bolts that secure them. At the last step, take out the battery positive cable connector from the solenoid's terminal receptacle and detach the starter motor.
Starter
56029274AA
Q: How to Install a Starter Motor for 3.7L, 4.7L, and 5.7L Engines on Dodge Ram 1500?
A:
Reach the solenoid wire longer end to the starter motor securely onto it. Put the end of the Battery Cable onto the solenoid stud and then tighten the nut to 19 ft. lbs. (25 Nm) while stopping the starter motor from dangling from the harness. Mount the starter motor onto the transmission and when the vehicle has an automatic transmission, set the cooler tube bracket in place. For automated vehicles, screw in and tighten each bolt until it reaches 50 ft. lbs. (68 Nm) and for manual vehicles, tighten both the bolt and nut the same amount, then once you've lowered the vehicle, attach the negative battery cable. With the 5.7L engine, make sure to place the solenoid wire from the immobilizer onto the starter motor and confirm it's attached. Place the battery wire on to the solenoid stud and tighten the nut on it as required by the torque specs, again making certain that the starter doesn't hang from the wiring harness. Put the starter motor onto the engine and, if using an automatic transmission, slide the cooler tube bracket into place. Install the two bolts to achieve 30 ft. lbs. (41 Nm), then connect the negative battery cable and lower your vehicle.