How to Safely Service a Headlight Switch on Jeep Wrangler?

Be sure to take precautions on cars fitted with air bags when working on the headlamp switch by taking care that the air bags are not accidentally deployed. When the headlamp switch was on, wait 5 minutes to ensure the ceramic dimmer resistor as to cool before touching the switch and getting burns. You start by removing and isolating the negative battery cable. Put the headlamp switch control knob out to the ON stop. To reach the headlamp switch depress the control knob and shaft release button on the switch body which is located with a reach under the instrument panel outboard of the steering column. Pull the switch control knob (and shaft unit) out via the headlamp switch, whilst holding the release button. Delete the knee blocker in the instrument panel. Then disconnect the spanner nut holding the headlamp switch on the instrument panel slide on bracket. Pull the headlamp switch off of the mounting bracket in order to reach the wire harness connectors and disconnect two connectors at the headlamp switch. Take out the headlamp switch of the instrument panel. Installation wise, place the headlamp switch against the instrument panel and bring the two wire harness connectors back together. Install the switch behind the mounting bracket and use spanner nut and tighten the same to the tune of 2.7 Nm (24 in. lbs.). Assemble back the knee blocker in the instrument station. Insert the shaft of the headlamp switch control knob and shaft unit through the steering column opening cover into the headlamp switch and fully insert it all the way into headlamp switch. Lastly, replace the negative battery cable.

How to Service the Headlight Switch on Jeep Cherokee?

Before starting the service, you must deactivate the air bag system by taking out the battery's negative cable, then wait for two minutes so the air bag capacitor is discharged and cannot deploy accidentally. Begin with taking out the knee blocker from the instrument panel. Push the headlamp switch down to ON, enter the steering column opening from the outboard side and press the release button found on the headlamp switch body inside the opening. As you continue to hold the release button down, pull out the headlamp switch control knob and shaft at the same time. After that, disconnect the two wire harness connectors on the panel from the headlamp switch receptacle and remove the headlamp switch from the panel. To install, place the headlamp switch where it belongs at the opening between the instrument panel and the steering column-then reinstall the wire harness connectors. Tuck the switch into the hole where it will be mounted and then put on the spanner nut, fastening it at 2.7 Nm (24 in.lbs.). Place the shaft of the knob and the shaft unit through the spanner nut to reach into the headlamp switch and push it all the way down. To complete, install the knee blocker on the device's panel and wire the negative cable from the battery back to the engine compartment.

OEM Jeep Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

82 Headlight Switches found

View related parts
Jeep Headlamp Switch Part Number: 56003119
$45.76 MSRP: $58.01
You Save: $12.25 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp Delco 1995353; Switch, Headlamp
Fits the following Jeep Models:
- Wrangler | 1987-1995 | Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Jeep Turn Signal Switch Part Number: 5143313AF
$147.11 MSRP: $221.00
You Save: $73.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143313AC, 5143313AE, 5143313AB, 5143313AD
Fits the following Jeep Models:
- Commander | 2006-2007 | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
- Grand Cherokee | 2005-2007 | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Headlamp Switch Part Number: 68154356AE
$84.29 MSRP: $126.00
You Save: $41.71 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp; Headlight Switch
- Replaces: 68154356AA, 68154356AB, 68154356AC, 68154356AD
Fits the following Jeep Models:
- Cherokee | 2014-2023 | 75th Anniversary, 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Sport, Trailhawk, Trailhawk Elite, Upland, X | 2.0L L4, 2.4L L4, 3.2L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Headlamp Switch Part Number: 68632914AA
$66.57 MSRP: $99.70
You Save: $33.13 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp
- Replaces: 68365329AA, 68365329AB
Fits the following Jeep Models:
- Grand Cherokee | 2022-2025 | Altitude, Altitude X, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
- Grand Cherokee L | 2021-2025 | Altitude, Altitude X, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56021898AB
$79.83 MSRP: $122.00
You Save: $42.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp
Fits the following Jeep Models:
- Cherokee | 1992-1996 | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1992 | Base, Eliminator, Pioneer | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56009869AC
$60.32 MSRP: $90.45
You Save: $30.13 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp
- Replaces: 56009869AB
Fits the following Jeep Models:
- Cherokee | 1997-2001 | Classic, Country, Limited, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
- Wrangler | 1997-2000 | SE, Sahara, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
Jeep Headlamp Switch Part Number: 68542445AA
$55.85 MSRP: $75.90
You Save: $20.05 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp
Fits the following Jeep Models:
- Wrangler | 2023-2025 | Freedom, Rubicon, Rubicon X, Sport, Sport S, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Turn Signal Switch Part Number: 5143311AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch Housing.; Headlamp Switch
- Replaces: 5143311AE, 5143311AC, 5143311AB, 5143311AD
Fits the following Jeep Models:
- Commander | 2006-2007 | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
- Grand Cherokee | 2005-2007 | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56001197
$30.90 MSRP: $39.17
You Save: $8.27 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp; Switch, Headlamp
Fits the following Jeep Models:
- Cherokee | 1984-1991 | Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1986-1991 | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Headlamp Switch Part Number: 68154353AE
$119.31 MSRP: $181.00
You Save: $61.69 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp; Headlight Switch; Switch Headlamp
- Replaces: 68154353AC, 68154353AD, 68154353AA, 68154353AB
Fits the following Jeep Models:
- Cherokee | 2014-2023 | 75th Anniversary, 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Sport, Trailhawk, Trailhawk Elite, Upland, X | 2.0L L4, 2.4L L4, 3.2L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Headlamp Switch Part Number: 68155995AC
$100.23 MSRP: $152.00
You Save: $51.77 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp; Switch Headlamp
- Replaces: 68155995AA, 68155995AB
Fits the following Jeep Models:
- Cherokee | 2014-2018 | 75th Anniversary, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Headlamp Switch Part Number: 68307819AA
$28.11 MSRP: $40.00
You Save: $11.89 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp; Switch Headlamp
Fits the following Jeep Models:
- Grand Cherokee | 2021 | 80th Anniversary, High Altitude, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Trackhawk, Trailhawk | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Wiper Switch Part Number: 56042303AD
Product Specifications
- Other Name: Switch - Multifunction; Windshield Washer Switch; Switch Multifunction
Fits the following Jeep Models:
- Grand Cherokee | 1999-2001 | Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56042299AE
Product Specifications
- Other Name: Switch - Multifunction; Hazard Flasher Switch; Multi Purpose Switch; Turn Signal & Hazard Switch; Switch Multifunction
Fits the following Jeep Models:
- Grand Cherokee | 1999-2001 | Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56042302AE
Product Specifications
- Other Name: Switch - Multifunction; Switch Multifunction
Fits the following Jeep Models:
- Grand Cherokee | 1999-2000 | Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56042301AE
Product Specifications
- Other Name: Switch - Multifunction; Hazard Flasher Switch; Multi Purpose Switch; Turn Signal & Hazard Switch; Switch Multifunction
Fits the following Jeep Models:
- Grand Cherokee | 1999-2002 | Laredo, Limited, Overland, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56042300AE
Product Specifications
- Other Name: Switch - Multifunction; Hazard Flasher Switch; Multi Purpose Switch; Turn Signal & Hazard Switch; Switch Multifunction
Fits the following Jeep Models:
- Grand Cherokee | 1999-2002 | Laredo, Limited, Overland, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56009213AC
Product Specifications
- Other Name: Switch - Pod
- Replaces: 56009213
Fits the following Jeep Models:
- Cherokee | 1994-1996 | 2.5L L4, 4.0L L6
- Grand Cherokee | 1994-1998 | 5.9 Limited, Laredo, Limited, Orvis, TSi | 4.0L L6, 5.2L V8, 5.9L V8, 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Wrangler | 1994-1995 | 2.5L L4, 4.0L L6
View More
View related parts
Jeep Headlamp Switch Part Number: 56042301AG
Product Specifications
- Other Name: Switch - Multifunction; Hazard Flasher Switch; Multi Purpose Switch; Combination Switch; Turn Signal & Hazard Switch; Switch Multifunction Left Side; Switch Multifunction
- Replaces: 56042301AF
Fits the following Jeep Models:
- Grand Cherokee | 2001-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Headlamp Switch Part Number: 56009212AC
Product Specifications
- Other Name: Switch - Pod
- Replaces: 56009212
Fits the following Jeep Models:
- Cherokee | 1994-1996 | 2.5L L4, 4.0L L6
- Grand Cherokee | 1994-1998 | 5.9 Limited, Laredo, Limited, Orvis, TSi | 4.0L L6, 5.2L V8, 5.9L V8, 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Wrangler | 1994-1995 | 2.5L L4, 4.0L L6
View More

| Page 1 of 5 |Next >

1-20 of 82 Results

Jeep Headlight Switch

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Headlight Switch for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Headlight Switch enables drivers to control the light at any moment in time to ensure that they travel safely in changing conditions. Jeep expanded to become a symbol of battlefields to be applied in the driveway because it never forgot about dirt roads, creek beds, and snowed-in driveways. The removable door, open-air cabins, and that square positioning are invitations to the actual adventure rather than the parking-lot posing. Jeep balances antique body prowess with the new-fangled brains such as Selec-Terrain, voice direction, and over-the-air updates that come in overnight. Jeep promises the same across deserts, suburbs, and logging trails. Get a grip on the ground and shake off punishment. Digital dashboards fetch updates off the sky making maps current and traction logic more intelligent after each run. Trails are run together, tips exchanged, and waves given to strangers since the badge immediately creates a family spirit. Within each cockpit, the Headlight Switch takes the power, through a rough rotary or pull-knob circuit, and turns on and off low beams, high beams, and dash backlight to soothe the pupils and expose road hazards in front of their teeth. The Headlight Switch is turned once in daytime and twice in full beams without using the complex menus. Whenever rain hits or the dust is desert-dry, the Headlight Switch changes to the mode of the fog lamp and glare-cutting, murk-punching. The Headlight Switch operates on blunt tactile clicks, even when wearing gloves, that do not require an eye to leave the trail. That assurance suits Jeep philosophy of simpler controls which are operable beyond city lights.

Jeep Headlight Switch Parts and Q&A

Headlamp Switch
56009869AC
Q: How to Safely Service a Headlight Switch on Jeep Wrangler?
A:
Be sure to take precautions on cars fitted with air bags when working on the headlamp switch by taking care that the air bags are not accidentally deployed. When the headlamp switch was on, wait 5 minutes to ensure the ceramic dimmer resistor as to cool before touching the switch and getting burns. You start by removing and isolating the negative battery cable. Put the headlamp switch control knob out to the ON stop. To reach the headlamp switch depress the control knob and shaft release button on the switch body which is located with a reach under the instrument panel outboard of the steering column. Pull the switch control knob (and shaft unit) out via the headlamp switch, whilst holding the release button. Delete the knee blocker in the instrument panel. Then disconnect the spanner nut holding the headlamp switch on the instrument panel slide on bracket. Pull the headlamp switch off of the mounting bracket in order to reach the wire harness connectors and disconnect two connectors at the headlamp switch. Take out the headlamp switch of the instrument panel. Installation wise, place the headlamp switch against the instrument panel and bring the two wire harness connectors back together. Install the switch behind the mounting bracket and use spanner nut and tighten the same to the tune of 2.7 Nm (24 in. lbs.). Assemble back the knee blocker in the instrument station. Insert the shaft of the headlamp switch control knob and shaft unit through the steering column opening cover into the headlamp switch and fully insert it all the way into headlamp switch. Lastly, replace the negative battery cable.
Turn Signal Switch
56010315AA
Q: How to Service the Headlight Switch on Jeep Cherokee?
A:
Before starting the service, you must deactivate the air bag system by taking out the battery's negative cable, then wait for two minutes so the air bag capacitor is discharged and cannot deploy accidentally. Begin with taking out the knee blocker from the instrument panel. Push the headlamp switch down to ON, enter the steering column opening from the outboard side and press the release button found on the headlamp switch body inside the opening. As you continue to hold the release button down, pull out the headlamp switch control knob and shaft at the same time. After that, disconnect the two wire harness connectors on the panel from the headlamp switch receptacle and remove the headlamp switch from the panel. To install, place the headlamp switch where it belongs at the opening between the instrument panel and the steering column-then reinstall the wire harness connectors. Tuck the switch into the hole where it will be mounted and then put on the spanner nut, fastening it at 2.7 Nm (24 in.lbs.). Place the shaft of the knob and the shaft unit through the spanner nut to reach into the headlamp switch and push it all the way down. To complete, install the knee blocker on the device's panel and wire the negative cable from the battery back to the engine compartment.