How to Service a Brake Fluid Level Sensor on 2006 Jeep Commander?

Before approaching the sensor, take the wire connector out from the brake fluid level sensor. Then, working on the side of the master cylinder reservoir where the sensor is, undo the sensor's retaining tabs with a small screwdriver and pull the sensor out through the connector side. During installation, place a new o-ring on the sensor and slide it into the reservoir to lock the two tabs and then connect the wire connector back to the level sensor.

OEM 2006 Jeep Commander Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2006 Jeep Commander Fluid Level Sensor Part Number: 5013903AA
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Sensor; Sensor Brake Fluid Level
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5013903AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Brake Fluid Level Sensor Parts and Q&A

Q: How to Service a Brake Fluid Level Sensor on 2006 Jeep Commander?
A: Before approaching the sensor, take the wire connector out from the brake fluid level sensor. Then, working on the side of the master cylinder reservoir where the sensor is, undo the sensor's retaining tabs with a small screwdriver and pull the sensor out through the connector side. During installation, place a new o-ring on the sensor and slide it into the reservoir to lock the two tabs and then connect the wire connector back to the level sensor.