What are the consequences of a failure in the water pump on Chrysler PT Cruiser?

A water pump failure can cause engine damage due to overheating. To check the pump's performance, turn on the heater. Usually, it won't circulate hot water efficiently to the heater core due to failure.

How to remove and install a water pump on Chrysler Cirrus?

Four-cylinder engines, Disconnect the negative battery cable from the ground stud on the left shock tower. Raise the vehicle and securely support it on jackstands. Remove the right inner splash shield. Remove the drive belts. Drain the cooling system. Using a floor jack (with a wood block placed between the jack head and the oil pan to prevent engine damage), support the engine from underneath and remove the right engine mount. Remove the power steering pump bracket bolts and move the power steering pump and bracket aside. The power steering lines do not have to be disconnected. Remove the right engine mount bracket. Remove the timing belt. Remove the inner timing belt cover. Remove the bolts attaching the water pump to the engine block and remove the pump. Install a new O-ring in the water pump body groove. Installation is the reversal of removal. Tighten the mounting bolts. Reinstall the pulleys and drive belts and check for tension. Refill the cooling system. Run the engine and check for leaks. V6 engine: Disconnect the negative battery cable from the ground stud on the left shock tower. Remove the drive belts and drain the cooling system. Remove the crankshaft damper/pulley, timing belt covers, and timing belt. Remove the water pump mounting bolts. Separate the pump from the water inlet pipe and remove the pump. Clean all the gasket and O-ring surfaces on the pump and the water pipe inlet tube. Install a new O-ring on the water inlet pipe. Wet the O-ring with water to facilitate assembly. Install a new gasket on the water pump and install the inlet opening over the water pipe. Press the water pipe into the pump housing. Install the water pump mounting bolts and tighten the bolts. Install the timing belt. The remainder of the installation is the reverse of removal. Refill the cooling system and operate the engine to check for leaks.

OEM Chrysler Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

45 Water Pumps found

View related parts
Chrysler Water Pump Part Number: 53022189AH
$179.01 MSRP: $267.00
You Save: $87.99 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 53022189AC, 53022189AD, 53022189AF, 5179734AA, 53021187AA, 53022058AA, 53022189AB, 53022189AA, 53022189AG
Fits the following Chrysler Models:
- Aspen | 2007-2009 | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Water Pump Part Number: 5047138AC
$103.42 MSRP: $158.00
You Save: $54.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump Assembly; Water Pump Assembly; Pump Water; Engine Water Pump
- Replaces: 5047138AB, 5047138AA, MN187244
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
- Sebring | 2007-2010 | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Water Pump Part Number: 68382494AA
$421.36 MSRP: $614.00
You Save: $192.64 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump Assembly; Engine Water Pump; Water Pump Assembly
- Replaces: 53021380AM, 53021380AK, 53021380AL, 53021380BB
Fits the following Chrysler Models:
- Aspen | 2007-2008 | Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Water Pump Part Number: 4792968AF
$158.33 MSRP: $242.00
You Save: $83.67 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 4792968AD
Fits the following Chrysler Models:
- 300 | 2005-2010 | Limited, S, Signature Series, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
- Pacifica | 2005-2008 | Base, LX, Limited, Touring | 3.5L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
- Sebring | 2007-2010 | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
- Town & Country | 2008-2010 | Limited, Touring, Touring Plus | 4.0L V6, 6 Cyl 4.0 L GAS
View More
View related parts
Chrysler Water Pump Part Number: 53022095AJ
$351.71 MSRP: $498.00
You Save: $146.29 (30%)
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 53022095AF
Fits the following Chrysler Models:
- 300 | 2009-2010 | C, S | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Water Pump Part Number: 4694307AF
$92.66 MSRP: $141.00
You Save: $48.34 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 4694307AE, 4694307AB, 4694307AC
Fits the following Chrysler Models:
- Cirrus | 1999-2000, 1997 | LX, LXi | 2.4L L4, 4 Cyl 2.4 L GAS
- Grand Voyager | 2000
- PT Cruiser | 2001-2010 | Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
- Sebring | 2001-2006, 1997-1999 | Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
- Town & Country | 1999-2007
- Voyager | 2000-2003 | Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View More
View related parts
Chrysler Water Pump Part Number: 4648952BB
$133.80 MSRP: $199.00
You Save: $65.20 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 4648952BA, 4648952AE
Fits the following Chrysler Models:
- Town & Country | 2008-2010 | LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pump Auxiliary Coolant Part Number: 68237837AA
$559.13 MSRP: $852.00
You Save: $292.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Auxiliary Coolant
Fits the following Chrysler Models:
- Pacifica | 2017-2024 | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Water Pump Part Number: 5010898AB
$76.19 MSRP: $113.00
You Save: $36.81 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump Package - Water; Water Pump Assembly
- Replaces: 5010898AA
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Imperial | 1990-1993 | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- New Yorker | 1990-1993 | Fifth Avenue, Landau, Salon | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Town & Country | 1990-2000 | Base, LX, LXi, Limited, SX | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2000 | Base, SE | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Water Pump Part Number: 4663732AD
$81.46 MSRP: $120.00
You Save: $38.54 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly; Pump Water
- Replaces: 4663732AC
Fits the following Chrysler Models:
- 300 | 2005-2007 | Base | 2.7L V6, 6 Cyl 2.7 L GAS
- 300M | 2004
- Concorde | 1998-2004 | LX | 2.7L V6, 6 Cyl 2.7 L GAS
- Sebring | 2001-2006 | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Chrysler Water Pump Part Number: 68382490AA
$111.22 MSRP: $170.00
You Save: $58.78 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Drive Gear; Water Pump Assembly; Timing Gear Set
- Replaces: 4667660AB, 4667660AE
Fits the following Chrysler Models:
- Cirrus | 2000 | LX | 4 Cyl 2.0 L GAS
- PT Cruiser | 2003-2004, 2001 | Base, Limited, Touring | 4 Cyl 2.4 L GAS
- Sebring | 2003-2006, 1995-1999 | LX | 4 Cyl 2.0 L GAS
View More
View related parts
Chrysler Pump - Water Part Number: 68346916AB
$250.39 MSRP: $369.00
You Save: $118.61 (33%)
ADD TO CART
Product Specifications
- Other Name: WATER
- Replaces: 5038677AA, 5038677AC, 5038677AD, 5038677AB, 68346916AA
Fits the following Chrysler Models:
- 300 | 2023, 2015-2020 | C, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Chrysler Water Pump Part Number: 5047389AC
$201.67 MSRP: $301.00
You Save: $99.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump Assembly; Pump Assembly; Water Pump Assembly; Pump Water
- Replaces: 5047389AA, 5047389AB, RL047389AA
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Water Pump Part Number: 68311109AC
$214.14 MSRP: $319.00
You Save: $104.86 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaced by: 68311109AD
- Replaces: 68311109AA, 68311109AB
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2025 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pump - Auxiliary Coolant Part Number: 68643457AA
$140.49 MSRP: $207.00
You Save: $66.51 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP-AUXILIARY COOLANT
- Replaces: 68237841AA
Fits the following Chrysler Models:
- Pacifica | 2017-2025 | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, Limited, Pinnacle, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020 | 3.6L V6
View related parts
Chrysler Water Pump Part Number: 68158680AA
$83.45 MSRP: $123.00
You Save: $39.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
Fits the following Chrysler Models:
- 200 | 2011-2012 | LX, Limited, S, Touring | 6 Cyl 3.6 L FLEX
View related parts
Chrysler Water Pump Part Number: 4884159AE
$121.54 MSRP: $185.00
You Save: $63.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 4884159AA
Fits the following Chrysler Models:
- PT Cruiser | 2003-2009 | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
- Sebring | 2003-2006
View related parts
Chrysler Water Pump Part Number: 5010898AA
$76.19 MSRP: $113.00
You Save: $36.81 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump Package - Water; Engine Water Pump; Pump Package Water
- Replaced by: 5010898AB
Fits the following Chrysler Models:
- Grand Voyager | 2000 | 3.3L V6
- Town & Country | 1999-2000, 1992-1995 | Base | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2000 | 3.3L V6, 3.8L V6
View More
View related parts
Chrysler Water Pump Part Number: 5097159AD
$505.35 MSRP: $740.00
You Save: $234.65 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump
- Replaces: 5097159AC
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
Chrysler Water Pump Part Number: 68346912AC
$265.12 MSRP: $390.00
You Save: $124.88 (33%)
Product Specifications
- Other Name: Pump - Water; Water Pump Assembly
- Replaces: 53022192AJ, 53022192AG, 53022192AI, 53022192AK, 68346912AA, 68346912AB, 53022192AF
Fits the following Chrysler Models:
- Aspen | 2009 | Limited | 5.7L V8, 8 Cyl 5.7 L GAS

| Page 1 of 3 |Next >

1-20 of 45 Results

Chrysler Water Pump

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Water Pump for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Water Pump circulates the coolant quickly to ensure that engines are cool and drivers do not have to worry about overheating. Chrysler was an automobile that was lifted on plain concepts that worked, such as Floating Power that eliminated trembling and Airflow shapes that cut drag without head-turning costs that regular families did not need to navigate through an assortment of sales gimmicks. Chrysler continued to go the extra mile by introducing the first helpful minivan, extending cabins to fit backpacks and strollers, reducing road noise with tuned honeydew, and finding hidden spaces to store people, and found that comfort in the real world is found when design puts people first and flashy gimmicks second. Within this general range of products is a Chrysler Water Pump that is based on a belt-driven system or electric types which either drag coolant down a radiator and block all sparks of immediate combustion, and electric versions continue to run after shutting off in order to evenly cool hot components and eliminate sneaky heat spots. It means that a Chrysler Water Pump protects gaskets against warping, hoses against pressure spikes, and eliminates the chances of vapor lock in traffic crawls and protects long-term reliability without stealing horsepower or adding extra weight under the hood. To add flow and reduce drag, performance enthusiasts can attach a lightweight aluminum Water Pump so as to make the high-rev engines remain cool and the wheels release valuable power. During small bursts or long hauls, the Water Pump remains the silent worker in the background, maintaining temperature needles stable to ensure that journeys remain worry-free.

Chrysler Water Pump Parts and Q&A

Water Pump
68382490AA
Q: What are the consequences of a failure in the water pump on Chrysler PT Cruiser?
A:
A water pump failure can cause engine damage due to overheating. To check the pump's performance, turn on the heater. Usually, it won't circulate hot water efficiently to the heater core due to failure.
Water Pump
4694307AF
Q: How to remove and install a water pump on Chrysler Cirrus?
A:
Four-cylinder engines, Disconnect the negative battery cable from the ground stud on the left shock tower. Raise the vehicle and securely support it on jackstands. Remove the right inner splash shield. Remove the drive belts. Drain the cooling system. Using a floor jack (with a wood block placed between the jack head and the oil pan to prevent engine damage), support the engine from underneath and remove the right engine mount. Remove the power steering pump bracket bolts and move the power steering pump and bracket aside. The power steering lines do not have to be disconnected. Remove the right engine mount bracket. Remove the timing belt. Remove the inner timing belt cover. Remove the bolts attaching the water pump to the engine block and remove the pump. Install a new O-ring in the water pump body groove. Installation is the reversal of removal. Tighten the mounting bolts. Reinstall the pulleys and drive belts and check for tension. Refill the cooling system. Run the engine and check for leaks. V6 engine: Disconnect the negative battery cable from the ground stud on the left shock tower. Remove the drive belts and drain the cooling system. Remove the crankshaft damper/pulley, timing belt covers, and timing belt. Remove the water pump mounting bolts. Separate the pump from the water inlet pipe and remove the pump. Clean all the gasket and O-ring surfaces on the pump and the water pipe inlet tube. Install a new O-ring on the water inlet pipe. Wet the O-ring with water to facilitate assembly. Install a new gasket on the water pump and install the inlet opening over the water pipe. Press the water pipe into the pump housing. Install the water pump mounting bolts and tighten the bolts. Install the timing belt. The remainder of the installation is the reverse of removal. Refill the cooling system and operate the engine to check for leaks.