How to Properly Install a Brake Disc for the BR4 Performance Brake System on Chrysler PT Cruiser?

Unlocking will void your warranty First, make sure the hub face is clean of dirt and rust by the location of the rotor. After that, set the brake rotor onto the hub and (wheel) bearing, using the studs to help. Afterward, lay the disc brake caliper and adapter on the brake rotor and knuckle. The caliper adapter on the knuckle should be secured with the mounting bolts at a torque of 104 Nm (77 ft. lbs.). Following that, screw the tire and wheel assembly onto the mounts with tightening of the wheel nuts to 135 Nm (100 ft. lbs.). Drive your car as far as you can onto the hydraulic lift and then drive the brake pedal back and forth. Don't forget to inspect and adjust the brake fluid in the reservoir and take the vehicle for a ride, making a few stops along the way so the brake pads settle properly into the rotor.

How to Remove and Replace the Rear Brake Disc on Chrysler PT Cruiser?

It's important to first raise and support the car before working on the rear brake rotor. Then, unthread the wheel mounting nuts and remove both the tire and the wheel. If there isn't enough room for the caliper piston, stand it down a little and pull at the caliper's edge, using the guide pins, to allow the caliper to clear the rotor and knuckle. After completing step 14, take out the two guide pin bolts and pull the caliper assembly off by pivoting the caliper away from the rotor and lifting it above the machined square mounting the adapter has. Fasten the brake caliper to the rear strut using a wire or cord instead of handling it to keep the brake hose from being damaged. Take out any pieces holding the brake rotor to the wheel studs and then just move the rotor off the hub and the bearing to finish this action.

OEM Chrysler PT Cruiser Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Discs found

View related parts
Chrysler PT Cruiser Rotor, Rear Part Number: 5085651AD
$114.21 MSRP: $174.00
You Save: $59.79 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Rear
- Replaces: 5085651AB, 5085651AA, 5085650AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Rotor, Front Part Number: 4509994AD
$51.81 MSRP: $116.00
You Save: $64.19 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 4509994AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Rotor, Front Part Number: 5273141AB
$101.50 MSRP: $142.00
You Save: $40.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5273141AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chrysler PT Cruiser | Base, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Rotor, Rear Part Number: 5085652AB
$191.99 MSRP: $247.00
You Save: $55.01 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Brake Disc; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 5085652AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler PT Cruiser | Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Rotor, Rear Part Number: 4509553AC
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Brake Disc; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler PT Cruiser | Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Brake Disc

Choose OEM Brake Disc that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Disc follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake Disc of Chrysler PT Cruiser car is one of the critical component of disc brake system through which the vehicle is supposed to slow or halt by offering friction area for the brake pad. Usually, these brake discs are produced from gray iron cast; some of them may comprise ventilation fins, which are necessary for effective heat exchanging, thus ensuring the further stable operation of the brakes. Chrysler automobile has particularly used solid and vented brake discs in different extents over the years. The vented rotor that is normally fitted at the front part is more effective as a cooler compared to the solid rotor fitted at the rear part while drilled or slotted type enhances heat and noise rejection. But such designs may have the disadvantage of higher wear of pads. It is recommended that PT Cruiser brake disc is checked often for common problems as warping, cracking, or rusting among others in order to enhance the vehicle's braking system.

Chrysler PT Cruiser Brake Disc Parts and Q&A

Rotor, Front
4509994AD
Q: How to Properly Install a Brake Disc for the BR4 Performance Brake System on Chrysler PT Cruiser?
A:
Unlocking will void your warranty First, make sure the hub face is clean of dirt and rust by the location of the rotor. After that, set the brake rotor onto the hub and (wheel) bearing, using the studs to help. Afterward, lay the disc Brake Caliper and adapter on the brake rotor and knuckle. The caliper adapter on the knuckle should be secured with the mounting bolts at a torque of 104 Nm (77 ft. lbs.). Following that, screw the tire and wheel assembly onto the mounts with tightening of the wheel nuts to 135 Nm (100 ft. lbs.). Drive your car as far as you can onto the hydraulic lift and then drive the brake pedal back and forth. Don't forget to inspect and adjust the brake fluid in the reservoir and take the vehicle for a ride, making a few stops along the way so the Brake Pads settle properly into the rotor.
Rotor, Rear
5085651AD
Q: How to Remove and Replace the Rear Brake Disc on Chrysler PT Cruiser?
A:
It's important to first raise and support the car before working on the rear brake rotor. Then, unthread the wheel mounting nuts and remove both the tire and the wheel. If there isn't enough room for the caliper piston, stand it down a little and pull at the caliper's edge, using the guide pins, to allow the caliper to clear the rotor and knuckle. After completing step 14, take out the two guide pin bolts and pull the caliper assembly off by pivoting the caliper away from the rotor and lifting it above the machined square mounting the adapter has. Fasten the Brake Caliper to the rear strut using a wire or cord instead of handling it to keep the brake hose from being damaged. Take out any pieces holding the brake rotor to the Wheel Studs and then just move the rotor off the hub and the bearing to finish this action.