How to Safely Service an Air Bag Sensor Mounted on the B-Pillar on Dodge Charger?

First, remove and isolate the battery negative cable and then allow at least two minutes for the system reserve capacitor to discharge, to avoid causing accidental air bag inflation that may hurt or kill you. After that, take out the B-pillar trim panel and break the connection for the electrical connector. Take out the two retaining screws. Put the B-pillar mounted impact sensor in the designated area and then secure with two screws, torquing them to 7 N.m (62 in. lbs.). After that, fasten the electrical connector and put back the B-pillar trim panel. Always wait to link the battery negative cable after the test to help avoid possible injury or death.

How to Safely Service and Properly Install an Air Bag Sensor on Dodge Ram 1500?

To work on the front impact sensor, start by disconnecting and isolating the battery negative cable, waiting two minutes so the system capacitor discharges and turning the supplemental restraint system off to prevent injury. Ensure you never strike or drop the front impact sensor, as it may become damaged and need to be changed; if it is dropped, a replacement is necessary. Insert the right or left front impact sensor into its place in the engine compartment and then reconnect the headlamp and dash wire harness to the sensor. Put the sensor on the end of the lower radiator crossmember, making sure the anti-rotation pin is in the clearance hole at that end. Bolt the sensor in place by first installing it behind the crossmember and tightening the screw to a torque of 10 Nm (90 in. lbs.). Let the supplemental restraint system verification test be completed first, before restoring any negative battery cable once servicing any part of the air bag system.

OEM Dodge Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Air Bag Sensors found

View related parts
Dodge Acceleration Sensor Part Number: 56054085AA
$197.14 MSRP: $294.00
You Save: $96.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Acceleration
- Position: Center
Fits the following Dodge Models:
- Durango | 2011-2020 | Citadel, Crew, Express, GT, GT Plus, Heat, Limited, Pursuit, R/T, Rallye, SRT, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Pressure Sensor Part Number: 68284055AA
$23.08 MSRP: $33.45
You Save: $10.37 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Pressure; Air Bag Seat Sensor Mat; Sensor Pressure
- Replaces: 68242912AA, 56054084AA, 56054084AB
Fits the following Dodge Models:
- Charger | 2011-2023 | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Sensor - Acceleration Part Number: 68606355AA
$11.19 MSRP: $16.30
You Save: $5.11 (32%)
ADD TO CART
Product Specifications
- Other Name: SENSOR-ACCELERATION
- Replaces: 68492236AA
Fits the following Dodge Models:
- Durango | 2011-2025 | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Position Sensor Part Number: 68606352AA
$9.57 MSRP: $13.90
You Save: $4.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Acceleration
Fits the following Dodge Models:
- Durango | 2024-2025 | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Plus, R/T Premium, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
Fits the following Dodge Models:
- Avenger | 2007-2009 | R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
- Caliber | 2007-2009 | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Durango | 2007-2009 | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
- Nitro | 2007-2010 | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View More
View related parts
Dodge Impact Sensor, Driver Side Part Number: 4727261AD
$45.89 MSRP: $58.35
You Save: $12.46 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Impact Sensor, Left; Air Bag Sensor; Side Impact Sensor; Sensor Side Airbag Impact
- Position: Driver Side
Fits the following Dodge Models:
- Caravan | 2001-2007 | Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Grand Caravan | 2001-2007 | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Impact Sensor Part Number: 4728370
$16.17 MSRP: $20.50
You Save: $4.33 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Airbag; Air Bag Sensor; Front Sensor; Airbag Impact (Use Insulation 4439082, Mounting Plate 6502825)
Fits the following Dodge Models:
- Shadow | 1994 | Base, ES | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Spirit | 1993-1995 | Base, ES, High Line | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Side Impact Sensor Part Number: 68013424AA
$17.42 MSRP: $99.95
You Save: $82.53 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor; Sensor Side Airbag Impact Body Mounted Sensor; Sensor Side Airbag Impact
Fits the following Dodge Models:
- Sprinter 2500 | 2007-2009 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
- Sprinter 3500 | 2007-2009 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Pressure Sensor Part Number: 68607114AA
$78.23 MSRP: $116.00
You Save: $37.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag - Pressure; Side Sensor
Fits the following Dodge Models:
- Hornet | 2023-2025 | GT, GT Plus, R/T, R/T Plus | 4 Cyl 1.3 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.0 L GAS
View related parts
Dodge SENSOR-ACCELERATION Part Number: 68570272AA
$7.25 MSRP: $10.45
You Save: $3.20 (31%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Dodge Models:
- Charger Daytona | 2024-2025 | R/T, Scat Pack | BATTERY EV (EV/BEV)
View related parts
Dodge SENSOR-PRESSURE Part Number: 68570274AA
$10.56 MSRP: $15.20
You Save: $4.64 (31%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Dodge Models:
- Charger Daytona | 2024-2025 | R/T, Scat Pack | BATTERY EV (EV/BEV)
View related parts
Dodge SENSOR-ACCELERATION Part Number: 68570273AA
$6.90 MSRP: $9.95
You Save: $3.05 (31%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Dodge Models:
- Charger Daytona | 2024-2025 | R/T, Scat Pack | BATTERY EV (EV/BEV)
View related parts
Dodge Sensor - Acceleration Part Number: 68570271AA
$7.13 MSRP: $10.30
You Save: $3.17 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR-ACCELERATION
Fits the following Dodge Models:
- Charger Daytona | 2024-2025 | R/T, Scat Pack | BATTERY EV (EV/BEV)
View related parts
Dodge Front Impact Sensor Part Number: 5170520AB
$42.08 MSRP: $53.34
You Save: $11.26 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front; Air Bag Sensor
- Position: Front
Fits the following Dodge Models:
- Caravan | 2006-2007 | Base, C/V, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Grand Caravan | 2006-2007 | Base, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Impact Sensor Part Number: 4728283
$16.95 MSRP: $21.49
You Save: $4.54 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag Sensor; Sensor
Fits the following Dodge Models:
- Daytona | 1988-1992 | Base, ES, ES Turbo, Iroc, Iroc R/T, Pacifica, Shelby, Shelby Z | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Dynasty | 1990-1993 | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Shadow | 1990-1991 | America, Base, ES, High Line | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
View More
View related parts
Dodge Impact Sensor Part Number: 4728281
$28.86 MSRP: $36.59
You Save: $7.73 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Package Airbag; Front Sensor; Front Airbag Impact (Use Insulation 4439082, Mounting Plate 6502044)
Fits the following Dodge Models:
- Dynasty | 1990-1993 | Base, LE, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Shadow | 1992-1993 | America, Base, ES, High Line | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Spirit | 1994, 1991-1992 | Base, ES, LE, R/T | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Dodge Impact Sensor Part Number: 56006911
Product Specifications
- Other Name: Sensor Air Bag; Air Bag Sensor; Front Sensor; Sensor, Air Bag Crash
Fits the following Dodge Models:
- Ram 1500 | 1994-1997 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 | 1994-1997 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 3500 | 1994-1997 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Impact Sensor, Front Part Number: 4896059AA
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
- Position: Front
- Replaces: 4896023AA, 4686957AC
Fits the following Dodge Models:
- Caravan | 2004-2007 | Base, C/V, SE, SXT | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Dakota | 2003-2011 | Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
- Grand Caravan | 2004-2007 | Anniversary Edition, Base, C/V, EX, SE, SE Plus, SXT | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Dodge Impact Sensor Part Number: 4637513
Product Specifications
- Other Name: Air Bag Impact (Insulation 4439082); Front Sensor; Stud Plate, W/Impact Sensor
Fits the following Dodge Models:
- Caravan | 1991-1993 | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Grand Caravan | 1991-1993 | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Dodge Knock Sensor Part Number: 4671185
Product Specifications
- Other Name: Detonation Sensor; Ignition Knock (Detonation) Sensor; Front Sensor
Fits the following Dodge Models:
- Caravan | 1989-1991 | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Daytona | 1992-1993 | Base, ES, Iroc | 6 Cyl 3.0 L GAS
- Grand Caravan | 1989-1991 | LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Shadow | 1992-1993 | Base, ES, High Line | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Spirit | 1989-1995 | Base, ES, High Line, LE, R/T | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 38 Results

Dodge Air Bag Sensor

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Air Bag Sensor for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Air Bag Sensor is able to notice a crash within milliseconds and protect you before you can blink. Dodge created all-steel bodies that shook off mistreatment, were applied by soldiers and projected an image of uncompromising steel since 1914. Dodge followed this with the stuffing of cars with riotous HEMIs and the Viper program which provided ordinary drivers with a shot of track attitude without sacrificing street courtesy. Dodge got a marriage of volts to volume in 2024, with Fratzonic Chambered Exhaust, a 600-watt blast of speakers and sound boxes, which syncs roar to the pressure of the right foot. Drag, Donut, Sport, and hush-hour Stealth modes are activated at the touch of a button, which shows that Dodge realizes that thrill seekers need to be able to use their cars to get to work and home. The Air Bag Sensor is mounted deep in the chassis to monitor acceleration data, compare this data with crash thresholds and then issue a deployment signal to the control unit in four milliseconds when buckling of metals is detected. The Air Bag Sensor then commands the front, side, and curtain bags to inflate out in order to create a kind of soft wall that protects the heads, ribs, and knees against the glass or steel. Rough seals and hard-case guts allow the Air Bag Sensor to shrug off heat, dust, winter salt and the interminable shocks of pothole seasons. Since the Air Bag Sensor fits into the standard circuitry and has universal crash language, it slides across the lineup and provides every cabin with identical bodyguard.

Dodge Air Bag Sensor Parts and Q&A

Impact Sensor, Front
4896173AA
Q: How to Safely Service an Air Bag Sensor Mounted on the B-Pillar on Dodge Charger?
A:
First, remove and isolate the battery negative cable and then allow at least two minutes for the system reserve capacitor to discharge, to avoid causing accidental air bag inflation that may hurt or kill you. After that, take out the B-pillar trim panel and break the connection for the electrical connector. Take out the two retaining screws. Put the B-pillar mounted impact sensor in the designated area and then secure with two screws, torquing them to 7 N.m (62 in. lbs.). After that, fasten the electrical connector and put back the B-pillar trim panel. Always wait to link the battery negative cable after the test to help avoid possible injury or death.
Air Bag Sensor, Front
4896061AB
Q: How to Safely Service and Properly Install an Air Bag Sensor on Dodge Ram 1500?
A:
To work on the front impact sensor, start by disconnecting and isolating the battery negative cable, waiting two minutes so the system capacitor discharges and turning the supplemental restraint system off to prevent injury. Ensure you never strike or drop the front impact sensor, as it may become damaged and need to be changed; if it is dropped, a replacement is necessary. Insert the right or left front impact sensor into its place in the engine compartment and then reconnect the headlamp and dash wire harness to the sensor. Put the sensor on the end of the lower radiator crossmember, making sure the anti-rotation pin is in the clearance hole at that end. Bolt the sensor in place by first installing it behind the crossmember and tightening the screw to a torque of 10 Nm (90 in. lbs.). Let the supplemental restraint system verification test be completed first, before restoring any negative battery cable once servicing any part of the air bag system.