How to Service a Fuel Rail on Chrysler Crossfire?

Don't begin servicing the fuel rail before releasing the system pressure, since it stays pressurized even without the engine on. Start with removing the housing for the air cleaner, then use the screw of the fuel rail trim panel to remove the fuel rail trim panel. You should place a shop towel underneath the fuel lines to collect any extra fuel. After that, unpressurize the fuel by opening the fuel rail service valve and then remove the fuel feed line at the fuel rail. Pull off the retaining clips on the fuel injector harness connector and remove the harness connections from the fuel injectors. After screwing the soil sensor/ground bolt into the cylinder block, take out the bolts holding the fuel rail to the intake manifold. Slide the fuel rail back and forth and slowly lift it upward to remove it with the fuel injectors. To install the fuel rail, all you need to do is move it left and right and slowly push it toward the intake. Attach the fuel rail with bolts and tighten them to 9 N.m. After that, restore the fuel injector harness to the fuel injectors and put the retaining clips back in. Fit the fuel feed line to the fuel rail and tighten it by hand to 38 N.m. After that, attach the fuel rail trim panel together with its screw and install the air cleaner housing.

How to Service a Fuel Rail on a 2.7L Engine on Chrysler 300?

Release the pressure in the fuel system by carrying out Fuel System Pressure Release Procedure before beginning service to the fuel rail. First, disconnect the negative battery cable and next, take out the intake manifold plenum to reach the fuel rail. Wrap the intake manifold so foreign items are blocked from getting into the engine. Take out the fuel supply tube quick connect fitting found at the rear of the fuel rail, then press away the red slider on each electrical connector at the fuel injector to remove the tab that holds it in place. There are identification tags on the factory fuel injection wiring harness for injector locations; if none are found, note the wiring locations before disconnecting the harness. Remove each of the bolts mounting the fuel rail on both sides and lift the fuel rail up and off the cylinder head. In the end, remove the clips holding the fuel injectors at the fuel rail and pull out the injectors.

OEM Chrysler Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

41 Fuel Rails found

View related parts
Chrysler Fuel Rail Part Number: 4861498AC
$122.41 MSRP: $184.00
You Save: $61.59 (34%)
ADD TO CART
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
- Replaces: 4861498AB
Fits the following Chrysler Models:
- Town & Country | 2001-2002 | EL, EX, LX, LXi, Limited | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2001-2002 | Base, LX | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Fuel Rail Part Number: 5038530AB
$250.39 MSRP: $369.00
You Save: $118.61 (33%)
ADD TO CART
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
- Replaced by: 5038530AC
- Replaces: 5038530AA
Fits the following Chrysler Models:
- 300 | 2012-2014 | SRT8, SRT8 Core | 8 Cyl 6.4 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4762923
$183.55 MSRP: $270.00
You Save: $86.45 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel W/Damper-3.5L Engine
Fits the following Chrysler Models:
- Concorde | 1993 | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler Fuel Rail Part Number: 53032903AD
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
- Replaces: 53032903AC
Fits the following Chrysler Models:
- Aspen | 2008-2009 | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Fuel Rail Part Number: 5135911AB
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
- Replaces: 4891436AB, 5135911AA
Fits the following Chrysler Models:
- PT Cruiser | 2003-2009 | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Fuel Rail Part Number: MD352589
Product Specifications
- Other Name: Tube - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Sebring | 2001-2004 | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4612217AB
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Grand Voyager | 2000 | Base, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Town & Country | 2000 | LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2000 | Base, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Fuel Rail Part Number: 4861387AD
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
- Replaces: 4861387AC
Fits the following Chrysler Models:
- Town & Country | 2001-2003
- Voyager | 2001-2003 | Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4591991AA
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Concorde | 2001-2004 | LX | 6 Cyl 2.7 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4861498AD
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Pacifica | 2005-2007 | Base | 6 Cyl 3.8 L GAS
- Town & Country | 2003-2007 | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Voyager | 2003 | LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View More
View related parts
Chrysler Fuel Rail Part Number: 4591480AG
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
- Replaces: 4591480AF, 4591480AD, 4591480AE
Fits the following Chrysler Models:
- Sebring | 2001-2005 | Base, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4591988AA
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Sebring | 2001-2010 | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4591893AA
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- 300 | 2005-2010 | Base, LX, Touring | 6 Cyl 2.7 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4861584AB
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Pacifica | 2004-2008 | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS
- Sebring | 2008-2010 | Limited | 6 Cyl 3.5 L GAS
- Town & Country | 2008-2010 | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View More
View related parts
Chrysler Fuel Rail Part Number: 4663929
Product Specifications
- Other Name: Rail Fuel Sub Assembly; Rail Assembly, Fuel; Rail Fuel
Fits the following Chrysler Models:
- Concorde | 1994-1996 | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Fuel Rail Part Number: 5098910AA
Product Specifications
- Other Name: Rail - Fuel; Rail Fuel
Fits the following Chrysler Models:
- Crossfire | 2004-2008 | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4796515
Product Specifications
- Other Name: Rail - Fuel W/Damper-3.3L Engine
Fits the following Chrysler Models:
- Concorde | 1993 | Base | 6 Cyl 3.3 L GAS
View related parts
Chrysler Fuel Rail Part Number: 53032712AE
Product Specifications
- Other Name: Rail - Fuel
- Replaces: 53032712AD, 53032712AC
Fits the following Chrysler Models:
- Aspen | 2007-2008 | Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4418514
Product Specifications
- Other Name: Rail - Fuel; Rail, Fuel
Fits the following Chrysler Models:
- LeBaron | 1989-1990 | Base, GT, GTC, GTS, High Line, Premium | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Town & Country | 1990 | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Fuel Rail Part Number: 4554006AB
Fits the following Chrysler Models:
- Town & Country | 1991 | Base | 6 Cyl 3.3 L GAS

| Page 1 of 3 |Next >

1-20 of 41 Results

Chrysler Fuel Rail

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Fuel Rail for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Fuel Rail does this by forcing pressurized fuel at high speed, ensuring smooth power delivery of all present lines. Chrysler sought to make real-world gains, as in the 1925 Floating Power engine shake reduction, in the 1930s slick Airflow bodies, and in the 1940s in demonstrating that a car can get out of the way as a commuter with a car that is good to ride in, real-world gains. Subsequently, Chrysler defied the wagon tradition with a sliding door minivan that provided huge interior space, immediate access, and a cost that could be handled by a normal family, not necessitating the acquisition of the luxury-car price. The manners on the road also became better because Chrysler continued to invest in supple suspensions, quieter cabins, and dashboards that could allow drivers to grab controls without having to look down a sea of buttons. Purchasers lingered since prices remained open, reliability figures increased every year, and long journeys were not endurance contests but instead a series of smooth sailing interrupted only by refuel visits. Within each contemporary Chrysler engine bay, the Fuel Rail acts as the pressure backbone and supplies multiport and direct injectors with constant flow despite the high or low bang of the plate upon the pedal and the changes in altitudes and temperatures. The Fuel Rail, which clamps fuel at calibrated high pressure, sharpens atomization, levels the combustion, enhances torque response, trims wastage of gasoline, and maintains low emissions without requiring exotic additives or frequent tune-ups. Hardened steel tubing, tightly sealed holes, and tight gaskets allow the Fuel Rail to bounce and shake at 60 miles an hour, salt, heat, everything, which ensures the same punch whether you are crawling through traffic or dragging a camper past the canyons.

Chrysler Fuel Rail Parts and Q&A

Fuel Rail
5098910AA
Q: How to Service a Fuel Rail on Chrysler Crossfire?
A:
Don't begin servicing the fuel rail before releasing the system pressure, since it stays pressurized even without the engine on. Start with removing the housing for the air cleaner, then use the screw of the fuel rail trim panel to remove the fuel rail trim panel. You should place a shop towel underneath the fuel lines to collect any extra fuel. After that, unpressurize the fuel by opening the fuel rail service valve and then remove the fuel feed line at the fuel rail. Pull off the retaining clips on the fuel injector harness connector and remove the harness connections from the fuel injectors. After screwing the soil sensor/ground bolt into the cylinder block, take out the bolts holding the fuel rail to the intake manifold. Slide the fuel rail back and forth and slowly lift it upward to remove it with the fuel injectors. To install the fuel rail, all you need to do is move it left and right and slowly push it toward the intake. Attach the fuel rail with bolts and tighten them to 9 N.m. After that, restore the fuel injector harness to the fuel injectors and put the retaining clips back in. Fit the fuel feed line to the fuel rail and tighten it by hand to 38 N.m. After that, attach the fuel rail trim panel together with its screw and install the air cleaner housing.
Fuel Rail
53013888AD
Q: How to Service a Fuel Rail on a 2.7L Engine on Chrysler 300?
A:
Release the pressure in the fuel system by carrying out Fuel System Pressure Release Procedure before beginning service to the fuel rail. First, disconnect the negative battery cable and next, take out the intake manifold plenum to reach the fuel rail. Wrap the intake manifold so foreign items are blocked from getting into the engine. Take out the fuel supply tube quick connect fitting found at the rear of the fuel rail, then press away the red slider on each electrical connector at the fuel injector to remove the tab that holds it in place. There are identification tags on the factory fuel injection wiring harness for injector locations; if none are found, note the wiring locations before disconnecting the harness. Remove each of the bolts mounting the fuel rail on both sides and lift the fuel rail up and off the cylinder head. In the end, remove the clips holding the fuel injectors at the fuel rail and pull out the injectors.