How to Remove the Washer Pump on Dodge Dakota?

Before removing the windshield washer pump, make sure to disconnect and shut off the battery negative cable. Empty the washer reservoir into a clean container to use the fluid again. Lift up the vehicle, then touch the outboard lower surface of the combination washer reservoir/coolant reserve bottle by reaching underneath the splash shield near the front of the left wheel house and the bumper support. Remove the wire harness connector from the washer pump/motor unit and remove the washer hose from the pump outlet nipple. Simply grasp the pump/motor housing near the top and pull it carefully to the rear to release the secure fit it has with the molded motor receptacle. Gently use a trim stick or wide flat tool to lift out the inlet nipple of the washer pump from its rubber seal in the reservoir, trying not to damage the reservoir. Lastly, eliminate and throw away the rubber grommet seal from the opening in the reservoir where the pump is mounted.

How to Service and Repair a Washer Pump on Dodge Dakota?

Start by unplugging and disconnecting the battery's negative cable to service the windshield washer motor. Continue by removing the headlamp and dash wire harness connector from the motor connector receptacle and pull off the washer supply hose from the barbed outlet nipple of the washer pump/motor, so that the washer fluid leaks into a suitable receptacle. With a trim stick or other flat-bladed tool, go round the opening in the rubber sealing ring until the inlet nipple of the pump comes loose, making sure not to injure the reservoir. Take off and throw away the rubber grommet seal inside the hole meant for the washer pump on the washer reservoir. When you position the grommet seal, make sure you install a brand-new one in the hole of the washer pump. Apply pressure on the rubber seal of the inlet in the reservoir while you fit and secure the pump's nipple. Place the washer hose onto the barbed opening on the pump, then attach the headlamp and dash wires to their place on the motor connector receptacle. Fill the reservoir with the fluid you removed earlier and then reattach the negative battery cable.

OEM Dodge Dakota Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Washer Pumps found

View related parts
Dodge Dakota Washer Pump Part Number: 55077301AA
$68.72 MSRP: $102.00
You Save: $33.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Pump Washer, Windshield
- Replaced by: 5103453AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Washer Pump Part Number: 5103453AA
$85.05 MSRP: $102.00
You Save: $16.95 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump; Pump Washer, Windshield
- Replaces: 55077301AA, 55077301AB, 5015937AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Dakota | Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Washer Pump Part Number: 4882796
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump; Pump Washer, Windshield
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Washer Pump Part Number: 5161378AA
Product Specifications
- Other Name: Pump Package - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Pump Windshield Washer Single Outlet; Pump Package Washer, Windshield
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Washer Pump Part Number: 4419161
Product Specifications
- Other Name: Motor; Washer Pump Repair Kit; Windshield Washer Pump; Front Washer Pump; Pump; Pump, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1996 Dodge Dakota | Base, LE, S, SE, SLT, Shelby, Sport, WS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Washer Pump, Black Part Number: 4762319
Product Specifications
- Other Name: Motor - W/Washer Reservoir - Black - W; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump; Pump Package, Washer, W/Grommet; Pump And Seal Package.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Dakota | Base, LE, SE | 4 Cyl 2.2 L GAS, 6 Cyl 3.9 L GAS

Dodge Dakota Washer Pump

Choose OEM Washer Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Washer Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Dakota Washer Pump functions as the essential part which demonstrates exceptional performance with durability in Dodge Dakota brands. This Washer Pump guarantees effective fluid transportation between reservoir and nozzles because of its efficient design thus enabling safe driving with clear road views. The Dodge Dakota Washer Pump continues to matter for vehicle maintenance since it works with all Dodge Dakota generations from 1986 until 2010. The Dodge Dakota Washer Pump enables clear visibility and supports overall vehicle efficiency thus it operates as an integral component of the automobile driving system. This Washer Pump delivers exceptional durability coupled with simple installation procedures thus making it popular among automotive markets because it requires minimal workforce to install it. Novel engineering of the the automaker car Washer Pump allows it to function continuously throughout different climate conditions. The car owners should consider this washer fluid delivery component as a vital addition because it boosts their driving safety. The car Washer Pump demonstrates the brand's dedication to safety and quality performance therefore building on the model's reputation as a dependable mid-size pickup truck model.

Dodge Dakota Washer Pump Parts and Q&A

Washer Pump
5161378AA
Q: How to Remove the Washer Pump on Dodge Dakota?
A:
Before removing the windshield washer pump, make sure to disconnect and shut off the battery negative cable. Empty the washer reservoir into a clean container to use the fluid again. Lift up the vehicle, then touch the outboard lower surface of the combination washer reservoir/coolant reserve bottle by reaching underneath the splash shield near the front of the left wheel house and the bumper support. Remove the wire harness connector from the washer pump/motor unit and remove the washer hose from the pump outlet nipple. Simply grasp the pump/motor housing near the top and pull it carefully to the rear to release the secure fit it has with the molded motor receptacle. Gently use a trim stick or wide flat tool to lift out the inlet nipple of the washer pump from its rubber seal in the reservoir, trying not to damage the reservoir. Lastly, eliminate and throw away the rubber grommet seal from the opening in the reservoir where the pump is mounted.
Washer Pump
5103453AA
Q: How to Service and Repair a Washer Pump on Dodge Dakota?
A:
Start by unplugging and disconnecting the battery's negative cable to service the windshield washer motor. Continue by removing the headlamp and dash wire harness connector from the motor connector receptacle and pull off the washer supply hose from the barbed outlet nipple of the washer pump/motor, so that the washer fluid leaks into a suitable receptacle. With a trim stick or other flat-bladed tool, go round the opening in the rubber sealing ring until the inlet nipple of the pump comes loose, making sure not to injure the reservoir. Take off and throw away the rubber grommet seal inside the hole meant for the washer pump on the washer reservoir. When you position the grommet seal, make sure you install a brand-new one in the hole of the washer pump. Apply pressure on the rubber seal of the inlet in the reservoir while you fit and secure the pump's nipple. Place the washer hose onto the barbed opening on the pump, then attach the headlamp and dash wires to their place on the motor connector receptacle. Fill the reservoir with the fluid you removed earlier and then reattach the negative Battery Cable.