How to Install a Drive Shaft on Dodge Charger?

The process of mounting the propeller shaft relies on two people to avoid any risk of driveline vibrations or little parts cracking. If nothing is attached to the V6 coupler or damper, bring the index marks together and attach everything with the 8mm socket and extension, making sure the sleeve 2 goes completely into the appropriate counterbores. Using 58 Nm (43 ft. lbs.), install three bolts that have washers and nuts. Looking at the index marks from the previous job, have your partner leaving the propeller shaft at the axle and then hand install the rear coupler-to-axle flange bolt/nuts without tightening them. Then, place the propeller shaft at the transmission flange and line up the index marks and hand-install the front coupler-to-transmission flange bolts and nuts before torquing. At this time, you only need to tighten the center bearing-to-body bolts enough to keep them from moving. Torque both sets of bolts or nuts on the motor and transmission coupler assemblies to 58 Nm (43 ft. lbs.). Previously compressing the rear suspension by raising the body on jack stands 2 is necessary before securing the bearing or issues including noise or early wearing of the bearing may appear. Compress the suspension and tighten the four bolts that attach the center bearing to the body; then put in heat shield 1, rear exhaust system 2 and crossmember 1.

How Should Drive Shaft Removal Be Conducted for Automatic Transmissions on Dodge Challenger?

When dealing with the drive/propeller shaft of any non-SRT automatic, have two people make the removal, so the shaft does not hang from the center bearing or from the transmission or rear axle flanges, since this could result in damage from the shaft's over-angulation, leading to vibrations in the driveline or possible component failure. Start by raising the vehicle on a hoist in neutral and putting alignment marks on the transmission, axle flanges and rubber couplers. Then, come to the rear of the car and take out the exhaust, then the heat shield retainers and the heat shield itself. Remove the bolts that join the front and rear coupler to the flanges on the propeller shaft, followed by the center bearing mounting bolts. Use help to take out the propeller shaft assembly. Take off the three bolts/nuts connecting the coupler to the propeller shaft and split the coupler and damper from the shaft, always noting the way they were attached.

OEM Dodge Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

271 Drive Shafts found

View related parts
Dodge Drive Shaft Part Number: 52123390AD
$932.62 MSRP: $1430.00
You Save: $497.38 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123390AC, 52123390AB
Fits the following Dodge Models:
- Ram 2500 | 2010 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
- Ram 3500 | 2010 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Drive Shaft Part Number: 5038277AE
$1008.87 MSRP: $1545.00
You Save: $536.13 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
- Replaces: 5038277AC, 5038277AB
Fits the following Dodge Models:
- Challenger | 2008-2014 | SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Drive Shaft, Front Part Number: 4593542AB
$1075.17 MSRP: $1640.00
You Save: $564.83 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Front; Driveshaft; Drive Shaft Assembly; Shaft Drive Front
- Position: Front
Fits the following Dodge Models:
- Charger | 2006-2014 | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
- Magnum | 2005-2008 | R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Drive Shaft Part Number: 52123117AC
$1110.53 MSRP: $1700.00
You Save: $589.47 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 5146475AA, 52123117AA, 52123117AB, 52105809AE
Fits the following Dodge Models:
- Ram 2500 | 2003-2010 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 5.9L L6, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Drive Shaft, Rear Part Number: 4593866AC
$1198.93 MSRP: $1825.00
You Save: $626.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Rear; Driveshaft; Shaft Drive Rear 2-Piece
- Position: Rear
- Replaces: 4593866AA, 4593866AB
Fits the following Dodge Models:
- Charger | 2009-2014 | Pursuit, R/T, SE | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Drive Shaft Part Number: 4593857AD
$1558.05 MSRP: $2370.00
You Save: $811.95 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
- Replaces: 4593857AC, 4593857AB
Fits the following Dodge Models:
- Challenger | 2009-2014 | Rallye Redline, SE, SXT, SXT Plus | 3.5L V6, 3.6L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Drive Shaft Part Number: 52123104AB
$1685.13 MSRP: $2575.00
You Save: $889.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123104AA, 52853186AC
Fits the following Dodge Models:
- Ram 2500 | 2005-2007 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6.7L L6
- Ram 3500 | 2005-2007 | Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6.7L L6
View related parts
Dodge Drive Shaft Part Number: 52123220AD
$2082.93 MSRP: $3165.00
You Save: $1082.07 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123220AA, 52123220AB, 52123152AA, 52123220AC
Fits the following Dodge Models:
- Ram 2500 | 2007-2010 | Laramie, SLT, ST, SXT, TRX | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6
- Ram 3500 | 2007-2010 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Drive Shaft Part Number: 68272626AD
$779.55 MSRP: $1190.00
You Save: $410.45 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
- Replaces: 52123980AC, 52123980AF, 52123980AG, 68272626AC, 52123980AE, 52123980AD, 68272626AB, 68272626AA
Fits the following Dodge Models:
- Challenger | 2015-2023 | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Drive Shaft Part Number: 52123021AC
$1036.23 MSRP: $1525.00
You Save: $488.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Replaces: 52123021AB, 52123021AA, 52105990AB
Fits the following Dodge Models:
- Ram 1500 | 2002-2010 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 | 2003-2009 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
- Ram 3500 | 2003-2009 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View More
View related parts
Dodge Drive Shaft, Rear Part Number: 52123974AJ
$1019.58 MSRP: $1505.00
You Save: $485.42 (33%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Rear; Driveshaft; Shaft Drive Rear
- Position: Rear
- Replaces: 52123974AC, 52123974AE, 52123974AF, 52123974AH, 52123974AD, 52123974AI, 52123974AG
Fits the following Dodge Models:
- Challenger | 2011-2023 | GT, Rallye Redline, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Drive Shaft, Rear Part Number: 52123975AG
$1058.01 MSRP: $1620.00
You Save: $561.99 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Rear; Driveshaft; Shaft Drive Rear
- Position: Rear
- Replaces: 52123975AC, 52123975AB, 52123975AD, 52123975AE, 52123975AF
Fits the following Dodge Models:
- Challenger | 2009-2023 | R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, T/A | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Drive Shaft, Rear Part Number: 52123973AH
$839.22 MSRP: $1270.00
You Save: $430.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Rear; Driveshaft; Shaft Drive Rear
- Position: Rear
- Replaces: 52123973AB, 52123973AC, 52123973AG, 52123973AE, 52123973AF, 52123973AD
Fits the following Dodge Models:
- Charger | 2011-2023 | GT, Pursuit, SE, SXT, SXT Plus, SXT Plus Leather | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Drive Shaft, Rear Part Number: 52123977AG
$1053.93 MSRP: $1540.00
You Save: $486.07 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Rear; Driveshaft; Shaft Drive Rear
- Position: Rear
- Replaces: 52123977AF, 52123977AB, 52123977AE, 52123977AC, 52123977AD
Fits the following Dodge Models:
- Charger | 2011-2023 | Daytona, Pursuit, R/T, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT8 | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Drive Shaft Part Number: 52105982AC
$1103.78 MSRP: $1620.00
You Save: $516.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Front Propeller Shaft; Shaft Drive Front; Shaft Drive
Fits the following Dodge Models:
- Dakota | 2001-2007 | Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
- Durango | 2001-2003 | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Drive Shaft Part Number: 5273310AB
$1149.20 MSRP: $1745.00
You Save: $595.80 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
- Replaces: 5273310AA
Fits the following Dodge Models:
- Caliber | 2007-2008 | R/T, SE, SRT-4, SXT | 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Drive Shaft Part Number: 5038545AA
$1545.75 MSRP: $2270.00
You Save: $724.25 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
Fits the following Dodge Models:
- Challenger | 2011-2014 | R/T, R/T Classic, SRT8 | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Drive Shaft Part Number: 52123386AC
$2994.55 MSRP: $4540.00
You Save: $1545.45 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 52123386AB
Fits the following Dodge Models:
- Ram 2500 | 2010 | Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL
- Ram 3500 | 2010 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Drive Shaft Part Number: 53010735AF
$988.66 MSRP: $1450.00
You Save: $461.34 (32%)
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
- Replaces: 53010735AC, 53010735AB, 53010735AE, 53010735AD, 53010735AA
Fits the following Dodge Models:
- Challenger | 2015-2023 | 392 Hemi Scat Pack Shaker, R/T 392, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, Scat Pack, Scat Pack 392 Widebody, T/A 392, T/A 392 Widebody | 6.2L V8, 6.4L V8, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Drive Shaft Part Number: 52123162AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52123162AB, 52123162AA
Fits the following Dodge Models:
- Ram 2500 | 2007-2010 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
- Ram 3500 | 2007-2010 | Laramie, SLT, ST, SXT, Sport | 5.9L L6, 6 Cyl 6.7 L DIESEL, 6.7L L6

| Page 1 of 14 |Next >

1-20 of 271 Results

Dodge Drive Shaft

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Drive Shaft for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Drive Shaft Parts and Q&A

Drive Shaft, Front
4593542AB
Q: How to Install a Drive Shaft on Dodge Charger?
A:
The process of mounting the propeller shaft relies on two people to avoid any risk of driveline vibrations or little parts cracking. If nothing is attached to the V6 coupler or damper, bring the index marks together and attach everything with the 8mm socket and extension, making sure the sleeve 2 goes completely into the appropriate counterbores. Using 58 Nm (43 ft. lbs.), install three bolts that have washers and nuts. Looking at the index marks from the previous job, have your partner leaving the propeller shaft at the axle and then hand install the rear coupler-to-axle flange bolt/nuts without tightening them. Then, place the propeller shaft at the transmission flange and line up the index marks and hand-install the front coupler-to-transmission flange bolts and nuts before torquing. At this time, you only need to tighten the center bearing-to-body bolts enough to keep them from moving. Torque both sets of bolts or nuts on the motor and transmission coupler assemblies to 58 Nm (43 ft. lbs.). Previously compressing the rear suspension by raising the body on jack stands 2 is necessary before securing the bearing or issues including noise or early wearing of the bearing may appear. Compress the suspension and tighten the four bolts that attach the center bearing to the body; then put in heat shield 1, rear exhaust system 2 and crossmember 1.
Drive Shaft, Rear
52123975AG
Q: How Should Drive Shaft Removal Be Conducted for Automatic Transmissions on Dodge Challenger?
A:
When dealing with the drive/propeller shaft of any non-SRT automatic, have two people make the removal, so the shaft does not hang from the center bearing or from the transmission or rear axle flanges, since this could result in damage from the shaft's over-angulation, leading to vibrations in the driveline or possible component failure. Start by raising the vehicle on a hoist in neutral and putting alignment marks on the transmission, axle flanges and rubber couplers. Then, come to the rear of the car and take out the exhaust, then the heat shield retainers and the heat shield itself. Remove the bolts that join the front and rear coupler to the flanges on the propeller shaft, followed by the center bearing mounting bolts. Use help to take out the propeller shaft assembly. Take off the three bolts/nuts connecting the coupler to the propeller shaft and split the coupler and damper from the shaft, always noting the way they were attached.